| Message ID | 20221216141717.2728340-1-f.suligoi@asem.it |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v1] usb: core: hub: disable autosuspend for TI TUSB8041 | expand |
HI Alan, ... drivers/usb/core/hub.c index > > 77e73fc8d673..b64be35e203f 100644 > > --- a/drivers/usb/core/hub.c > > +++ b/drivers/usb/core/hub.c > > @@ -44,6 +44,10 @@ > > #define USB_PRODUCT_USB5534B 0x5534 > > #define USB_VENDOR_CYPRESS 0x04b4 > > #define USB_PRODUCT_CY7C65632 0x6570 > > +#define USB_VENDOR_TEXAS_INSTRUMENTS 0x0451 > > +#define USB_PRODUCT_TUSB8041_USB3 0x8140 > > +#define USB_PRODUCT_TUSB8041_USB2 \ > > + (USB_PRODUCT_TUSB8041_USB3 | > ((USB_PRODUCT_TUSB8041_USB3 & 0x00FF) ^ > > +0x02)) > > Argh. Just put the actual hex number here -- people don't want to do > calculations like this in their head when they are reading code. (Not to > mention that the number would occupy only six characters of source text > whereas your calculation occupies a lot more.) > > Otherwise fine. Ok, I'll put the actual hex number instead of the formula. Thanks for your suggestion! > > Alan Stern > Best regards, Flavio
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 77e73fc8d673..b64be35e203f 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -44,6 +44,10 @@ #define USB_PRODUCT_USB5534B 0x5534 #define USB_VENDOR_CYPRESS 0x04b4 #define USB_PRODUCT_CY7C65632 0x6570 +#define USB_VENDOR_TEXAS_INSTRUMENTS 0x0451 +#define USB_PRODUCT_TUSB8041_USB3 0x8140 +#define USB_PRODUCT_TUSB8041_USB2 \ + (USB_PRODUCT_TUSB8041_USB3 | ((USB_PRODUCT_TUSB8041_USB3 & 0x00FF) ^ 0x02)) #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01 #define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02 @@ -5854,6 +5858,16 @@ static const struct usb_device_id hub_id_table[] = { .idVendor = USB_VENDOR_GENESYS_LOGIC, .bInterfaceClass = USB_CLASS_HUB, .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND}, + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT, + .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS, + .idProduct = USB_PRODUCT_TUSB8041_USB2, + .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND}, + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT, + .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS, + .idProduct = USB_PRODUCT_TUSB8041_USB3, + .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND}, { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS, .bDeviceClass = USB_CLASS_HUB}, { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
The Texas Instruments TUSB8041 has an autosuspend problem at high temperature. If there is not USB traffic, after a couple of ms, the device enters in autosuspend mode. In this condition the external clock stops working, to save energy. When the USB activity turns on, ther hub exits the autosuspend state, the clock starts running again and all works fine. At ambient temperature all works correctly, but at high temperature, when the USB activity turns on, the external clock doesn't restart and the hub disappears from the USB bus. Disabling the autosuspend mode for this hub solves the issue. Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> --- drivers/usb/core/hub.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)