| Message ID | 20221213123823.455731-3-bhupesh.sharma@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: sm6115: Add USB SS qmp phy node and perform some cleanups | expand |
diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts index fa57f4bf58256..3f39f25e0721e 100644 --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -229,6 +229,11 @@ &usb { status = "okay"; }; +&usb_dwc3 { + maximum-speed = "high-speed"; + dr_mode = "peripheral"; +}; + &usb_hsphy { vdd-supply = <&vreg_l4a>; vdda-pll-supply = <&vreg_l12a>; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index b5f7480c2e713..e4ce135264f3d 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -1031,8 +1031,6 @@ usb_dwc3: usb@4e00000 { snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; snps,usb3_lpm_capable; - maximum-speed = "high-speed"; - dr_mode = "peripheral"; }; };
Normally the 'maximum-speed' and 'dr_mode' properties of a USB controller + port is dependent on the type of the ports, regulators and mode change interrupt routing available on the board(s). So, move the same from the sm6115 dtsi file to respective board file(s). Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts | 5 +++++ arch/arm64/boot/dts/qcom/sm6115.dtsi | 2 -- 2 files changed, 5 insertions(+), 2 deletions(-)