@@ -228,6 +228,27 @@ vreg_l9d: ldo9 {
};
};
+&i2c4 {
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_default>;
+
+ status = "okay";
+
+ touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vreg_misc_3p3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts0_default>;
+ };
+};
+
&i2c21 {
clock-frequency = <400000>;
@@ -334,27 +355,6 @@ &qup0 {
status = "okay";
};
-&qup0_i2c4 {
- clock-frequency = <400000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&qup0_i2c4_default>;
-
- status = "okay";
-
- touchscreen@10 {
- compatible = "hid-over-i2c";
- reg = <0x10>;
-
- hid-descr-addr = <0x1>;
- interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
- vdd-supply = <&vreg_misc_3p3>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&ts0_default>;
- };
-};
-
&qup1 {
status = "okay";
};
@@ -494,6 +494,14 @@ hastings_reg_en: hastings-reg-en-state {
&tlmm {
gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
+ i2c4_default: i2c4-default-state {
+ pins = "gpio171", "gpio172";
+ function = "qup4";
+
+ bias-disable;
+ drive-strength = <16>;
+ };
+
i2c21_default: i2c21-default-state {
pins = "gpio81", "gpio82";
function = "qup21";
@@ -598,14 +606,6 @@ wake-n-pins {
};
};
- qup0_i2c4_default: qup0-i2c4-default-state {
- pins = "gpio171", "gpio172";
- function = "qup4";
-
- bias-disable;
- drive-strength = <16>;
- };
-
tpad_default: tpad-default-state {
int-n-pins {
pins = "gpio182";
@@ -282,6 +282,28 @@ vreg_l9d: ldo9 {
};
};
+&i2c4 {
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_default>;
+
+ status = "okay";
+
+ /* FIXME: verify */
+ touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vreg_misc_3p3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts0_default>;
+ };
+};
+
&i2c21 {
clock-frequency = <400000>;
@@ -554,28 +576,6 @@ &qup0 {
status = "okay";
};
-&qup0_i2c4 {
- clock-frequency = <400000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&qup0_i2c4_default>;
-
- status = "okay";
-
- /* FIXME: verify */
- touchscreen@10 {
- compatible = "hid-over-i2c";
- reg = <0x10>;
-
- hid-descr-addr = <0x1>;
- interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
- vdd-supply = <&vreg_misc_3p3>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&ts0_default>;
- };
-};
-
&qup1 {
status = "okay";
};
@@ -698,6 +698,13 @@ hall_int_n_default: hall-int-n-state {
bias-disable;
};
+ i2c4_default: i2c4-default-state {
+ pins = "gpio171", "gpio172";
+ function = "qup4";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
i2c21_default: i2c21-default-state {
pins = "gpio81", "gpio82";
function = "qup21";
@@ -801,13 +808,6 @@ wake-n-pins {
};
};
- qup0_i2c4_default: qup0-i2c4-default-state {
- pins = "gpio171", "gpio172";
- function = "qup4";
- bias-disable;
- drive-strength = <16>;
- };
-
tpad_default: tpad-default-state {
int-n-pins {
pins = "gpio182";
@@ -858,7 +858,7 @@ qup0: geniqup@9c0000 {
status = "disabled";
- qup0_i2c4: i2c@990000 {
+ i2c4: i2c@990000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00990000 0 0x4000>;
clock-names = "se";
In preparation for adding the missing SPI and I2C nodes to sc8280xp.dtsi, it was decided to rename all of the existing qupX_ uart, spi, and i2c nodes to drop the qupX_ prefix. Let's go ahead and rename qup0_i2c4 to i2c4. Note that some nodes are moved in the file by this patch to preserve the expected sort order in the file. Signed-off-by: Brian Masney <bmasney@redhat.com> Link: https://lore.kernel.org/lkml/20221212182314.1902632-1-bmasney@redhat.com/ --- This is a new patch that's introduced in v2. arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 58 +++++++++---------- .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 58 +++++++++---------- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 +- 3 files changed, 59 insertions(+), 59 deletions(-)