diff mbox series

[3/6] arm64: dts: qcom: pmi8950: Add missing ADC channels

Message ID 20221214232049.703484-4-marijn.suijten@somainline.org
State Superseded
Headers show
Series [1/6] arm64: dts: qcom: pmi8950: Add USB vbus and id sensing nodes | expand

Commit Message

Marijn Suijten Dec. 14, 2022, 11:20 p.m. UTC
These seem to have previously been excluded due to either not residing
on the test board, and/or lacking VADC_USB_DP/VADC_USB_DM definitions.
Now that the channel constants are included in dt-bindings, add the
channels to DT as well.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 arch/arm64/boot/dts/qcom/pmi8950.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
index 7a857b2f3a5a..42a867685275 100644
--- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
@@ -69,6 +69,30 @@  adc-chan@d {
 				qcom,pre-scaling = <1 1>;
 				label = "chg_temp";
 			};
+
+			adc-chan@e {
+				reg = <VADC_GND_REF>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			adc-chan@f {
+				reg = <VADC_VDD_VADC>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_vdd";
+			};
+
+			adc-chan@43 {
+				reg = <VADC_USB_DP>;
+				qcom,pre-scaling = <1 1>;
+				label = "usb_dp";
+			};
+
+			adc-chan@44 {
+				reg = <VADC_USB_DM>;
+				qcom,pre-scaling = <1 1>;
+				label = "usb_dm";
+			};
 		};
 
 		pmi8950_mpps: mpps@a000 {