diff mbox series

[2/2] arm64: dts: qcom: msm8996-tone: Move status last

Message ID 20221210141000.14344-2-konrad.dybcio@linaro.org
State New
Headers show
Series [1/2] dt-bindings: remoteproc: qcom,adsp: Add SM6375 MPSS | expand

Commit Message

Konrad Dybcio Dec. 10, 2022, 2:10 p.m. UTC 
Align the style with other boards.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 .../dts/qcom/msm8996-sony-xperia-tone.dtsi    | 26 ++++++++-----------
 1 file changed, 11 insertions(+), 15 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
index c9be32b81d36..40b28489d3f5 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
@@ -100,8 +100,8 @@  wlan_en: wlan-en-1-8v {
 };
 
 &blsp1_i2c3 {
-	status = "okay";
 	clock-frequency = <355000>;
+	status = "okay";
 
 	tof_sensor: vl53l0x@29 {
 		compatible = "st,vl53l0x";
@@ -114,15 +114,15 @@  &blsp1_uart2 {
 };
 
 &blsp2_i2c5 {
-	status = "okay";
 	clock-frequency = <355000>;
+	status = "okay";
 
 	/* FUSB301 USB-C controller */
 };
 
 &blsp2_i2c6 {
-	status = "okay";
 	clock-frequency = <355000>;
+	status = "okay";
 
 	synaptics@2c {
 		compatible = "syna,rmi4-i2c";
@@ -179,11 +179,10 @@  &camera2_rst {
 };
 
 &hsusb_phy1 {
-	status = "okay";
-
 	vdd-supply = <&pm8994_l28>;
 	vdda-pll-supply = <&pm8994_l12>;
 	vdda-phy-dpdm-supply = <&pm8994_l24>;
+	status = "okay";
 };
 
 &mmcc {
@@ -191,18 +190,17 @@  &mmcc {
 };
 
 &pcie0 {
-	status = "okay";
 	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 	vddpe-3v3-supply = <&wlan_en>;
 	vdda-supply = <&pm8994_l28>;
+	status = "okay";
 };
 
 &pcie_phy {
-	status = "okay";
-
 	vdda-phy-supply = <&pm8994_l28>;
 	vdda-pll-supply = <&pm8994_l12>;
+	status = "okay";
 };
 
 &pm8994_gpios {
@@ -474,8 +472,8 @@  rf-id-mpp-pins {
 };
 
 &pm8994_resin {
-	status = "okay";
 	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
 };
 
 &pmi8994_gpios {
@@ -619,9 +617,9 @@  pmi8994_s2: s2 {
 };
 
 &pmi8994_wled {
-	status = "okay";
 	default-brightness = <512>;
 	qcom,num-strings = <3>;
+	status = "okay";
 };
 
 &rpm_requests {
@@ -821,20 +819,18 @@  pm8994_l32: l32 {
 };
 
 &sdhc1 {
-	status = "okay";
-
 	vmmc-supply = <&pm8994_l20>;
 	vqmmc-supply = <&pm8994_s4>;
 	mmc-hs400-1_8v;
 	mmc-hs200-1_8v;
+	status = "okay";
 };
 
 &sdhc2 {
-	status = "okay";
-
 	cd-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&pm8994_l21>;
 	vqmmc-supply = <&pm8994_l13>;
+	status = "okay";
 };
 
 &tlmm {
@@ -943,8 +939,8 @@  touch_int_sleep: touch-int-sleep-state {
  * 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should.
  */
 &usb3 {
-	status = "okay";
 	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
 };
 
 &usb3_dwc3 {