diff mbox series

[v2,09/15] thermal/drivers/tsens: Drop single-cell code for mdm9607

Message ID 20221204055909.1351895-10-dmitry.baryshkov@linaro.org
State New
Headers show
Series thermal/drivers/tsens: specify nvmem cells in DT rather than parsing them manually | expand

Commit Message

Dmitry Baryshkov Dec. 4, 2022, 5:59 a.m. UTC
There is no dtsi file for mdm9607 in the kernel sources. Drop the
compatibility with unofficial dtsi and remove support for handling the
single-cell calibration data on mdm9607.

Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/thermal/qcom/tsens-v0_1.c | 95 +------------------------------
 1 file changed, 1 insertion(+), 94 deletions(-)
diff mbox series

Patch

diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index a273a0643053..c84abe9b4299 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -133,39 +133,6 @@ 
 
 #define BIT_APPEND		0x3
 
-/* eeprom layout data for mdm9607 */
-#define MDM9607_BASE0_MASK	0x000000ff
-#define MDM9607_BASE1_MASK	0x000ff000
-#define MDM9607_BASE0_SHIFT	0
-#define MDM9607_BASE1_SHIFT	12
-
-#define MDM9607_S0_P1_MASK	0x00003f00
-#define MDM9607_S1_P1_MASK	0x03f00000
-#define MDM9607_S2_P1_MASK	0x0000003f
-#define MDM9607_S3_P1_MASK	0x0003f000
-#define MDM9607_S4_P1_MASK	0x0000003f
-
-#define MDM9607_S0_P2_MASK	0x000fc000
-#define MDM9607_S1_P2_MASK	0xfc000000
-#define MDM9607_S2_P2_MASK	0x00000fc0
-#define MDM9607_S3_P2_MASK	0x00fc0000
-#define MDM9607_S4_P2_MASK	0x00000fc0
-
-#define MDM9607_S0_P1_SHIFT	8
-#define MDM9607_S1_P1_SHIFT	20
-#define MDM9607_S2_P1_SHIFT	0
-#define MDM9607_S3_P1_SHIFT	12
-#define MDM9607_S4_P1_SHIFT	0
-
-#define MDM9607_S0_P2_SHIFT	14
-#define MDM9607_S1_P2_SHIFT	26
-#define MDM9607_S2_P2_SHIFT	6
-#define MDM9607_S3_P2_SHIFT	18
-#define MDM9607_S4_P2_SHIFT	6
-
-#define MDM9607_CAL_SEL_MASK	0x00700000
-#define MDM9607_CAL_SEL_SHIFT	20
-
 static int calibrate_8916(struct tsens_priv *priv)
 {
 	int base0 = 0, base1 = 0, i;
@@ -363,60 +330,6 @@  static int calibrate_8974(struct tsens_priv *priv)
 	return 0;
 }
 
-static int calibrate_9607(struct tsens_priv *priv)
-{
-	int base, i;
-	u32 p1[5], p2[5];
-	int mode = 0;
-	u32 *qfprom_cdata;
-	int ret;
-
-	ret = tsens_calibrate_common(priv);
-	if (!ret)
-		return 0;
-
-	qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
-	if (IS_ERR(qfprom_cdata))
-		return PTR_ERR(qfprom_cdata);
-
-	mode = (qfprom_cdata[2] & MDM9607_CAL_SEL_MASK) >> MDM9607_CAL_SEL_SHIFT;
-	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
-
-	switch (mode) {
-	case TWO_PT_CALIB:
-		base = (qfprom_cdata[2] & MDM9607_BASE1_MASK) >> MDM9607_BASE1_SHIFT;
-		p2[0] = (qfprom_cdata[0] & MDM9607_S0_P2_MASK) >> MDM9607_S0_P2_SHIFT;
-		p2[1] = (qfprom_cdata[0] & MDM9607_S1_P2_MASK) >> MDM9607_S1_P2_SHIFT;
-		p2[2] = (qfprom_cdata[1] & MDM9607_S2_P2_MASK) >> MDM9607_S2_P2_SHIFT;
-		p2[3] = (qfprom_cdata[1] & MDM9607_S3_P2_MASK) >> MDM9607_S3_P2_SHIFT;
-		p2[4] = (qfprom_cdata[2] & MDM9607_S4_P2_MASK) >> MDM9607_S4_P2_SHIFT;
-		for (i = 0; i < priv->num_sensors; i++)
-			p2[i] = ((base + p2[i]) << 2);
-		fallthrough;
-	case ONE_PT_CALIB2:
-		base = (qfprom_cdata[0] & MDM9607_BASE0_MASK);
-		p1[0] = (qfprom_cdata[0] & MDM9607_S0_P1_MASK) >> MDM9607_S0_P1_SHIFT;
-		p1[1] = (qfprom_cdata[0] & MDM9607_S1_P1_MASK) >> MDM9607_S1_P1_SHIFT;
-		p1[2] = (qfprom_cdata[1] & MDM9607_S2_P1_MASK) >> MDM9607_S2_P1_SHIFT;
-		p1[3] = (qfprom_cdata[1] & MDM9607_S3_P1_MASK) >> MDM9607_S3_P1_SHIFT;
-		p1[4] = (qfprom_cdata[2] & MDM9607_S4_P1_MASK) >> MDM9607_S4_P1_SHIFT;
-		for (i = 0; i < priv->num_sensors; i++)
-			p1[i] = ((base + p1[i]) << 2);
-		break;
-	default:
-		for (i = 0; i < priv->num_sensors; i++) {
-			p1[i] = 500;
-			p2[i] = 780;
-		}
-		break;
-	}
-
-	compute_intercept_slope(priv, p1, p2, mode);
-	kfree(qfprom_cdata);
-
-	return 0;
-}
-
 /* v0.1: 8916, 8939, 8974, 9607 */
 
 static struct tsens_features tsens_v0_1_feat = {
@@ -506,15 +419,9 @@  struct tsens_plat_data data_8974 = {
 	.fields	= tsens_v0_1_regfields,
 };
 
-static const struct tsens_ops ops_9607 = {
-	.init		= init_common,
-	.calibrate	= calibrate_9607,
-	.get_temp	= get_temp_common,
-};
-
 struct tsens_plat_data data_9607 = {
 	.num_sensors	= 5,
-	.ops		= &ops_9607,
+	.ops		= &ops_v0_1,
 	.feat		= &tsens_v0_1_feat,
 	.fields	= tsens_v0_1_regfields,
 };