diff mbox series

ASoC: dt-bindings: maxim,max98504: Convert to DT schema

Message ID 20221204113621.151303-1-krzysztof.kozlowski@linaro.org
State Accepted
Commit 715f45854f559f361d2c222a0353a3a1818875ed
Headers show
Series ASoC: dt-bindings: maxim,max98504: Convert to DT schema | expand

Commit Message

Krzysztof Kozlowski Dec. 4, 2022, 11:36 a.m. UTC 
Convert the Maxim Integrated MAX98504 amplifier bindings to DT schema.
Few properties are made optional:
1. interrupts: current Linux driver implementation does not use them,
2. supplies: on some boards these might be wired to battery, for which
   no regulator is provided.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/sound/max98504.txt    | 44 ----------
 .../bindings/sound/maxim,max98504.yaml        | 86 +++++++++++++++++++
 2 files changed, 86 insertions(+), 44 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/max98504.txt
 create mode 100644 Documentation/devicetree/bindings/sound/maxim,max98504.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/max98504.txt b/Documentation/devicetree/bindings/sound/max98504.txt
deleted file mode 100644
index 583ed5fdfb28..000000000000
--- a/Documentation/devicetree/bindings/sound/max98504.txt
+++ /dev/null
@@ -1,44 +0,0 @@ 
-Maxim MAX98504 class D mono speaker amplifier
-
-This device supports I2C control interface and an IRQ output signal. It features
-a PCM and PDM digital audio interface (DAI) and a differential analog input.
-
-Required properties:
-
- - compatible : "maxim,max98504"
- - reg : should contain the I2C slave device address
- - DVDD-supply, DIOVDD-supply, PVDD-supply: power supplies for the device,
-   as covered in ../regulator/regulator.txt
- - interrupts : should specify the interrupt line the device is connected to,
-   as described in ../interrupt-controller/interrupts.txt
-
-Optional properties:
-
- - maxim,brownout-threshold - the PVDD brownout threshold, the value must be
-   from 0, 1...21 range, corresponding to 2.6V, 2.65V...3.65V voltage range
- - maxim,brownout-attenuation - the brownout attenuation to the speaker gain
-   applied during the "attack hold" and "timed hold" phase, the value must be
-   from 0...6 (dB) range
- - maxim,brownout-attack-hold-ms - the brownout attack hold phase time in ms,
-   0...255 (VBATBROWN_ATTK_HOLD, register 0x0018)
- - maxim,brownout-timed-hold-ms - the brownout timed hold phase time in ms,
-   0...255 (VBATBROWN_TIME_HOLD, register 0x0019)
- - maxim,brownout-release-rate-ms - the brownout release phase step time in ms,
-   0...255 (VBATBROWN_RELEASE, register 0x001A)
-
-The default value when the above properties are not specified is 0,
-the maxim,brownout-threshold property must be specified to actually enable
-the PVDD brownout protection.
-
-Example:
-
- max98504@31 {
-	compatible = "maxim,max98504";
-	reg = <0x31>;
-	interrupt-parent = <&gpio_bank_0>;
-	interrupts = <2 0>;
-
-	DVDD-supply = <&regulator>;
-	DIOVDD-supply = <&regulator>;
-	PVDD-supply = <&regulator>;
-};
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98504.yaml b/Documentation/devicetree/bindings/sound/maxim,max98504.yaml
new file mode 100644
index 000000000000..23f19a9d2c06
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98504.yaml
@@ -0,0 +1,86 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98504.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98504 class D mono speaker amplifier
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Maxim Integrated MAX98504 speaker amplifier supports I2C control interface
+  with an IRQ output signal, PCM and PDM digital audio interface (DAI) and a
+  differential analog input.
+
+properties:
+  compatible:
+    const: maxim,max98504
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  DIOVDD-supply: true
+  DVDD-supply: true
+  PVDD-supply: true
+
+  maxim,brownout-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 21
+    default: 0
+    description:
+      PVDD brownout threshold, where values correspond to 2.6V, 2.65V...3.65V
+      voltage range.  Property also enables the PVDD brownout protection.
+
+  maxim,brownout-attenuation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 6
+    default: 0
+    description:
+      Brownout attenuation to the speaker gain applied during the "attack hold"
+      and "timed hold" phase, the value must be from 0...6 (dB) range.
+
+  maxim,brownout-attack-hold-ms:
+    maximum: 255
+    default: 0
+    description:
+      Brownout attack hold phase time in ms, VBATBROWN_ATTK_HOLD, register 0x0018.
+
+  maxim,brownout-timed-hold-ms:
+    maximum: 255
+    default: 0
+    description:
+      Brownout timed hold phase time in ms, VBATBROWN_TIME_HOLD, register 0x0019.
+
+  maxim,brownout-release-rate-ms:
+    maximum: 255
+    default: 0
+    description:
+      Brownout release phase step time in ms, VBATBROWN_RELEASE, register 0x001A.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        amplifier@31 {
+            compatible = "maxim,max98504";
+            reg = <0x31>;
+
+            DIOVDD-supply = <&ldo3_reg>;
+            DVDD-supply = <&ldo3_reg>;
+        };
+    };