diff mbox series

[v5,10/12] arm64: dts: qcom: sc8280xp: Define some of the display blocks

Message ID 20221207220012.16529-11-quic_bjorande@quicinc.com
State New
Headers show
Series drm/msm: Add SC8280XP support | expand

Commit Message

Bjorn Andersson Dec. 7, 2022, 10 p.m. UTC
From: Bjorn Andersson <bjorn.andersson@linaro.org>

Define the display clock controllers, the MDSS instances, the DP phys
and connect these together.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---

Changes since v4:
- None

 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 +++++++++++++++++++++++++
 1 file changed, 838 insertions(+)

Comments

Johan Hovold Dec. 9, 2022, 10:52 a.m. UTC | #1
On Wed, Dec 07, 2022 at 02:00:10PM -0800, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> Define the display clock controllers, the MDSS instances, the DP phys
> and connect these together.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
> 
> Changes since v4:
> - None
> 
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 +++++++++++++++++++++++++
>  1 file changed, 838 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 9f3132ac2857..c2f186495506 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
 
> +		mdss0: display-subsystem@ae00000 {
> +			compatible = "qcom,sc8280xp-mdss";
> +			reg = <0 0x0ae00000 0 0x1000>;
> +			reg-names = "mdss";
> +
> +			power-domains = <&dispcc0 MDSS_GDSC>;
> +
> +			clocks = <&gcc GCC_DISP_AHB_CLK>,
> +				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> +				 <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
> +			clock-names = "iface",
> +				      "ahb",
> +				      "core";
> +
> +			resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
> +
> +			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +
> +			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> +					<&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
> +			interconnect-names = "mdp0-mem", "mdp1-mem";
> +
> +			iommus = <&apps_smmu 0x1000 0x402>;
> +
> +			status = "disabled";

Please move status last.

> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +
> +			mdss0_mdp: display-controller@ae01000 {

[...]

> +		mdss1: display-subsystem@22000000 {
> +			compatible = "qcom,sc8280xp-mdss";
> +			reg = <0 0x22000000 0 0x1000>;
> +			reg-names = "mdss";
> +
> +			power-domains = <&dispcc1 MDSS_GDSC>;
> +
> +			clocks = <&gcc GCC_DISP_AHB_CLK>,
> +				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
> +				 <&dispcc1 DISP_CC_MDSS_MDP_CLK>;
> +			clock-names = "iface",
> +				      "ahb",
> +				      "core";
> +
> +			resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>;
> +
> +			interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +
> +			interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>,
> +					<&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>;
> +			interconnect-names = "mdp0-mem", "mdp1-mem";
> +
> +			iommus = <&apps_smmu 0x1800 0x402>;
> +
> +			status = "disabled";

Same here.

> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +
> +			mdss1_mdp: display-controller@22001000 {

Johan
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 9f3132ac2857..c2f186495506 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -4,6 +4,7 @@ 
  * Copyright (c) 2022, Linaro Limited
  */
 
+#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/interconnect/qcom,sc8280xp.h>
@@ -1698,6 +1699,44 @@  usb_1_qmpphy: phy@8903000 {
 			status = "disabled";
 		};
 
+		mdss1_dp0_phy: phy@8909a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x08909a00 0 0x19c>,
+			      <0 0x08909200 0 0xec>,
+			      <0 0x08909600 0 0xec>,
+			      <0 0x08909000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdss1_dp1_phy: phy@890ca00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x0890ca00 0 0x19c>,
+			      <0 0x0890c200 0 0xec>,
+			      <0 0x0890c600 0 0xec>,
+			      <0 0x0890c000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc8280xp-llcc";
 			reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>;
@@ -1813,6 +1852,326 @@  usb_1_dwc3: usb@a800000 {
 			};
 		};
 
+		mdss0: display-subsystem@ae00000 {
+			compatible = "qcom,sc8280xp-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc0 MDSS_GDSC>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "ahb",
+				      "core";
+
+			resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x1000 0x402>;
+
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			mdss0_mdp: display-controller@ae01000 {
+				compatible = "qcom,sc8280xp-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&gcc GCC_DISP_SF_AXI_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+						  <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <460000000>,
+						       <19200000>;
+
+				operating-points-v2 = <&mdss0_mdp_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				interrupt-parent = <&mdss0>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@5 {
+						reg = <5>;
+						mdss0_intf5_out: endpoint {
+							remote-endpoint = <&mdss0_dp3_in>;
+						};
+					};
+
+					port@6 {
+						reg = <6>;
+						mdss0_intf6_out: endpoint {
+							remote-endpoint = <&mdss0_dp2_in>;
+						};
+					};
+				};
+
+				mdss0_mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-500000000 {
+						opp-hz = /bits/ 64 <500000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+					opp-600000000 {
+						opp-hz = /bits/ 64 <600000000>;
+						required-opps = <&rpmhpd_opp_turbo_l1>;
+					};
+				};
+			};
+
+			mdss0_dp2: displayport-controller@ae9a000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xae9a000 0 0x200>,
+				      <0 0xae9a200 0 0x200>,
+				      <0 0xae9a400 0 0x600>,
+				      <0 0xae9b000 0 0x400>;
+				interrupt-parent = <&mdss0>;
+				interrupts = <14>;
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>;
+
+				phys = <&mdss0_dp2_phy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss0_dp2_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss0_dp2_in: endpoint {
+							remote-endpoint = <&mdss0_intf6_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss0_dp2_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss0_dp3: displayport-controller@aea0000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xaea0000 0 0x200>,
+				      <0 0xaea0200 0 0x200>,
+				      <0 0xaea0400 0 0x600>,
+				      <0 0xaea1000 0 0x400>;
+				interrupt-parent = <&mdss0>;
+				interrupts = <15>;
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp3_phy 0>, <&mdss0_dp3_phy 1>;
+
+				phys = <&mdss0_dp3_phy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss0_dp3_opp_table>;
+				power-domains = <&dispcc0 MDSS_GDSC>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss0_dp3_in: endpoint {
+							remote-endpoint = <&mdss0_intf5_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss0_dp3_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		mdss0_dp2_phy: phy@aec2a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x0aec2a00 0 0x19c>,
+			      <0 0x0aec2200 0 0xec>,
+			      <0 0x0aec2600 0 0xec>,
+			      <0 0x0aec2000 0 0x1c8>;
+
+			clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdss0_dp3_phy: phy@aec5a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x0aec5a00 0 0x19c>,
+			      <0 0x0aec5200 0 0xec>,
+			      <0 0x0aec5600 0 0xec>,
+			      <0 0x0aec5000 0 0x1c8>;
+
+			clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		dispcc0: clock-controller@af00000 {
+			compatible = "qcom,sc8280xp-dispcc0";
+			reg = <0 0x0af00000 0 0x20000>;
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&mdss0_dp2_phy 0>,
+				 <&mdss0_dp2_phy 1>,
+				 <&mdss0_dp3_phy 0>,
+				 <&mdss0_dp3_phy 1>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			power-domains = <&rpmhpd SC8280XP_MMCX>;
+			required-opps = <&rpmhpd_opp_nom>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			status = "disabled";
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sc8280xp-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
@@ -2425,6 +2784,485 @@  IPCC_MPROC_SIGNAL_GLINK_QMP
 				qcom,remote-pid = <12>;
 			};
 		};
+
+		mdss1: display-subsystem@22000000 {
+			compatible = "qcom,sc8280xp-mdss";
+			reg = <0 0x22000000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc1 MDSS_GDSC>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "ahb",
+				      "core";
+
+			resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>;
+
+			interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x1800 0x402>;
+
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			mdss1_mdp: display-controller@22001000 {
+				compatible = "qcom,sc8280xp-dpu";
+				reg = <0 0x22001000 0 0x8f000>,
+				      <0 0x220b0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&gcc GCC_DISP_SF_AXI_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_MDP_CLK>,
+						  <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <460000000>,
+						       <19200000>;
+
+				operating-points-v2 = <&mdss1_mdp_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				interrupt-parent = <&mdss1>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_intf0_out: endpoint {
+							remote-endpoint = <&mdss1_dp0_in>;
+						};
+					};
+
+					port@4 {
+						reg = <4>;
+						mdss1_intf4_out: endpoint {
+							remote-endpoint = <&mdss1_dp1_in>;
+						};
+					};
+
+					port@5 {
+						reg = <5>;
+						mdss1_intf5_out: endpoint {
+							remote-endpoint = <&mdss1_dp3_in>;
+						};
+					};
+
+					port@6 {
+						reg = <6>;
+						mdss1_intf6_out: endpoint {
+							remote-endpoint = <&mdss1_dp2_in>;
+						};
+					};
+				};
+
+				mdss1_mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-500000000 {
+						opp-hz = /bits/ 64 <500000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+					opp-600000000 {
+						opp-hz = /bits/ 64 <600000000>;
+						required-opps = <&rpmhpd_opp_turbo_l1>;
+					};
+				};
+			};
+
+			mdss1_dp0: displayport-controller@22090000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x22090000 0 0x200>,
+				      <0 0x22090200 0 0x200>,
+				      <0 0x22090400 0 0x600>,
+				      <0 0x22091000 0 0x400>;
+				interrupt-parent = <&mdss1>;
+				interrupts = <12>;
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>;
+
+				phys = <&mdss1_dp0_phy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss1_dp0_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp0_in: endpoint {
+							remote-endpoint = <&mdss1_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
+			};
+
+			mdss1_dp1: displayport-controller@22098000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x22098000 0 0x200>,
+				      <0 0x22098200 0 0x200>,
+				      <0 0x22098400 0 0x600>,
+				      <0 0x22099000 0 0x400>;
+				interrupt-parent = <&mdss1>;
+				interrupts = <13>;
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>;
+
+				phys = <&mdss1_dp1_phy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss1_dp1_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp1_in: endpoint {
+							remote-endpoint = <&mdss1_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss1_dp2: displayport-controller@2209a000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x2209a000 0 0x200>,
+				      <0 0x2209a200 0 0x200>,
+				      <0 0x2209a400 0 0x600>,
+				      <0 0x2209b000 0 0x400>;
+				interrupt-parent = <&mdss1>;
+				interrupts = <14>;
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>;
+
+				phys = <&mdss1_dp2_phy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss1_dp2_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp2_in: endpoint {
+							remote-endpoint = <&mdss1_intf6_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp2_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss1_dp3: displayport-controller@220a0000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x220a0000 0 0x200>,
+				      <0 0x220a0200 0 0x200>,
+				      <0 0x220a0400 0 0x600>,
+				      <0 0x220a1000 0 0x400>;
+				interrupt-parent = <&mdss1>;
+				interrupts = <15>;
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp3_phy 0>, <&mdss1_dp3_phy 1>;
+
+				phys = <&mdss1_dp3_phy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss1_dp3_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp3_in: endpoint {
+							remote-endpoint = <&mdss1_intf5_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp3_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		mdss1_dp2_phy: phy@220c2a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x220c2a00 0 0x19c>,
+			      <0 0x220c2200 0 0xec>,
+			      <0 0x220c2600 0 0xec>,
+			      <0 0x220c2000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdss1_dp3_phy: phy@220c5a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x220c5a00 0 0x19c>,
+			      <0 0x220c5200 0 0xec>,
+			      <0 0x220c5600 0 0xec>,
+			      <0 0x220c5000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		dispcc1: clock-controller@22100000 {
+			compatible = "qcom,sc8280xp-dispcc1";
+			reg = <0 0x22100000 0 0x20000>;
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <0>,
+				 <&mdss1_dp0_phy 0>,
+				 <&mdss1_dp0_phy 1>,
+				 <&mdss1_dp1_phy 0>,
+				 <&mdss1_dp1_phy 1>,
+				 <&mdss1_dp2_phy 0>,
+				 <&mdss1_dp2_phy 1>,
+				 <&mdss1_dp3_phy 0>,
+				 <&mdss1_dp3_phy 1>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			power-domains = <&rpmhpd SC8280XP_MMCX>;
+			required-opps = <&rpmhpd_opp_nom>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			status = "disabled";
+		};
 	};
 
 	thermal-zones {