new file mode 100644
@@ -0,0 +1,50 @@
+Texas Instruments' Message Manager Driver
+========================================
+
+The Texas Instruments' Message Manager is a mailbox controller that has
+configurable queues selectable at SoC(System on Chip) integration. The Message
+manager is broken up into queues in different address regions that are called
+"proxies" - each instance is unidirectional and is instantiated at SoC
+integration level to indicate receive or transmit path.
+
+Message Manager Device Node:
+===========================
+Required properties:
+--------------------
+- compatible: Shall be: "ti,k2g-message-manager"
+- reg-names queue_proxy_region - Map the queue proxy region.
+ queue_state_debug_region - Map the queue state debug
+ region.
+- reg: Contains the register map per reg-names.
+- #mbox-cells Shall be 2. Contains the queue ID and proxy ID in that
+ order referring to the transfer path.
+- interrupt-names: Contains interrupt names matching the rx transfer path
+ for a given SoC. Receive interrupts shall be of the
+ format: "rx_<QID>_<PID>".
+ For ti,k2g-message-manager, this shall contain:
+ "rx_005_002", "rx_057_002"
+- interrupts: Contains the interrupt information corresponding to
+ interrupt-names property.
+
+Example(K2G):
+------------
+
+ msgmgr: msgmgr@02a00000 {
+ compatible = "ti,k2g-message-manager";
+ #mbox-cells = <2>;
+ reg-names = "queue_proxy_region", "queue_state_debug_region";
+ reg = <0x02a00000 0x400000>, <0x028c3400 0x400>;
+ interrupt-names = "rx_005", "rx_057";
+ interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pmmc: pmmc {
+ [...]
+ mbox-names = "rx", "tx";
+ # RX queue ID is 5, proxy ID is 2
+ # TX queue ID is 0, proxy ID is 0
+ mboxes= <&msgmgr 5 2>,
+ <&msgmgr 0 0>;
+ [...]
+ };
Message Manager is a hardware block used to communicate with various processor systems within certain Texas Instrument's Keystone generation SoCs. This hardware engine is used to transfer messages from various compute entities(or processors) within the SoC. It is designed to be self contained without needing software initialization for operation. Signed-off-by: Nishanth Menon <nm@ti.com> --- Changes in V2: major refactor of binding - Thanks for all the review from Rob and Jassi - Generic compatible property is dropped - no more child nodes, instead interrupt information is provided as part of the the message manager node it self - part of data moved into driver based on compatible property. - mbox-cells is 2 (passes queue_id and proxy_id) -added elaboration as well - change in interrupt names V1: https://patchwork.kernel.org/patch/8237111/ .../bindings/mailbox/ti,message-manager.txt | 50 ++++++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/ti,message-manager.txt -- 2.7.0