diff mbox

[v6,05/11] drm/hisilicon: Add vblank driver for ADE

Message ID 1456476028-36880-6-git-send-email-xinliang.liu@linaro.org
State Superseded
Headers show

Commit Message

Xinliang Liu Feb. 26, 2016, 8:40 a.m. UTC
Add vblank irq handle.

v6: None.
v5: None.
v4: None.
v3:
- Remove hisi_get_crtc_from_index func.
- A few cleanup.
v2:
- Remove abtraction layer.

Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>

---
 drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c | 62 +++++++++++++++++++++++++
 drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c | 14 +++++-
 2 files changed, 75 insertions(+), 1 deletion(-)

-- 
2.7.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Xinliang Liu March 1, 2016, 10:14 a.m. UTC | #1
Hi,

On 1 March 2016 at 02:48, Archit Taneja <architt@codeaurora.org> wrote:
>

>

> On 2/26/2016 2:10 PM, Xinliang Liu wrote:

>>

>> Add vblank irq handle.

>>

>> v6: None.

>> v5: None.

>> v4: None.

>> v3:

>> - Remove hisi_get_crtc_from_index func.

>> - A few cleanup.

>> v2:

>> - Remove abtraction layer.

>>

>> Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>

>> ---

>>   drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c | 62

>> +++++++++++++++++++++++++

>>   drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c | 14 +++++-

>>   2 files changed, 75 insertions(+), 1 deletion(-)

>>

>> diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c

>> b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c

>> index aa2cf75cab39..749382952ab7 100644

>> --- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c

>> +++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c

>> @@ -292,6 +292,59 @@ static void ade_set_medianoc_qos(struct ade_crtc

>> *acrtc)

>>                            SOCKET_QOS_EN, SOCKET_QOS_EN);

>>   }

>>

>> +static int ade_enable_vblank(struct drm_device *dev, unsigned int pipe)

>> +{

>> +       struct kirin_drm_private *priv = dev->dev_private;

>> +       struct ade_crtc *acrtc = to_ade_crtc(priv->crtc[pipe]);

>> +       struct ade_hw_ctx *ctx = acrtc->ctx;

>> +       void __iomem *base = ctx->base;

>> +

>> +       if (!ctx->power_on)

>> +               (void)ade_power_up(ctx);

>> +

>> +       ade_update_bits(base + LDI_INT_EN, FRAME_END_INT_EN_OFST,

>> +                       MASK(1), 1);

>> +

>> +       return 0;

>> +}

>> +

>> +static void ade_disable_vblank(struct drm_device *dev, unsigned int pipe)

>> +{

>> +       struct kirin_drm_private *priv = dev->dev_private;

>> +       struct ade_crtc *acrtc = to_ade_crtc(priv->crtc[pipe]);

>> +       struct ade_hw_ctx *ctx = acrtc->ctx;

>> +       void __iomem *base = ctx->base;

>> +

>> +       if (!ctx->power_on) {

>> +               DRM_ERROR("power is down! vblank disable fail\n");

>> +               return;

>> +       }

>> +

>> +       ade_update_bits(base + LDI_INT_EN, FRAME_END_INT_EN_OFST,

>> +                       MASK(1), 0);

>> +}

>> +

>> +static irqreturn_t ade_irq_handler(int irq, void *data)

>> +{

>> +       struct ade_crtc *acrtc = data;

>> +       struct ade_hw_ctx *ctx = acrtc->ctx;

>> +       struct drm_crtc *crtc = &acrtc->base;

>> +       void __iomem *base = ctx->base;

>> +       u32 status;

>> +

>> +       status = readl(base + LDI_MSK_INT);

>> +       DRM_DEBUG_VBL("LDI IRQ: status=0x%X\n", status);

>> +

>> +       /* vblank irq */

>> +       if (status & BIT(FRAME_END_INT_EN_OFST)) {

>> +               ade_update_bits(base + LDI_INT_CLR, FRAME_END_INT_EN_OFST,

>> +                               MASK(1), 1);

>> +               drm_crtc_handle_vblank(crtc);

>> +       }

>> +

>> +       return IRQ_HANDLED;

>> +}

>> +

>>   static void ade_display_enable(struct ade_crtc *acrtc)

>>   {

>>         struct ade_hw_ctx *ctx = acrtc->ctx;

>> @@ -967,6 +1020,15 @@ int ade_drm_init(struct drm_device *dev)

>>         if (ret)

>>                 return ret;

>>

>> +       /* vblank irq init */

>> +       ret = devm_request_irq(dev->dev, ctx->irq, ade_irq_handler,

>> +                              DRIVER_IRQ_SHARED, dev->driver->name,

>> acrtc);

>

>

> This isn't the way we set up interrupts for kms drivers. We need to

> provide the handler in drm_driver and call drm_irq_install.


I prefer to set up interrupts here for two reasons.
One is that it is easy to pass any interrupt private "void * data" to
the interrupt handler here.
As I discussed with Daniel Vetter before: https://lkml.org/lkml/2015/9/10/204.

Second is setting up interrupt here in the specific SoC display
controller driver, make other SoC reuse the kirin_drm_drv.c code
easily.
Different Hisilicon SoC may has different display controller interrupts.

>

>

>> +       if (ret)

>> +               return ret;

>> +       dev->driver->get_vblank_counter = drm_vblank_no_hw_counter;

>> +       dev->driver->enable_vblank = ade_enable_vblank;

>> +       dev->driver->disable_vblank = ade_disable_vblank;

>> +

>>         return 0;

>>   }

>>

>> diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c

>> b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c

>> index 055729c1889c..723888feb760 100644

>> --- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c

>> +++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c

>> @@ -32,6 +32,7 @@ static int kirin_drm_kms_cleanup(struct drm_device *dev)

>>   {

>>         struct kirin_drm_private *priv = dev->dev_private;

>>

>> +       drm_vblank_cleanup(dev);

>>         dc_ops->cleanup(dev);

>>         drm_mode_config_cleanup(dev);

>>         devm_kfree(dev->dev, priv);

>> @@ -85,11 +86,22 @@ static int kirin_drm_kms_init(struct drm_device *dev)

>>                 goto err_dc_cleanup;

>>         }

>>

>> +       /* vblank init */

>> +       ret = drm_vblank_init(dev, dev->mode_config.num_crtc);

>> +       if (ret) {

>> +               DRM_ERROR("failed to initialize vblank.\n");

>> +               goto err_unbind_all;

>> +       }

>> +       /* with irq_enabled = true, we can use the vblank feature. */

>> +       dev->irq_enabled = true;

>> +

>>         /* reset all the states of crtc/plane/encoder/connector */

>>         drm_mode_config_reset(dev);

>>

>>         return 0;

>>

>> +err_unbind_all:

>> +       component_unbind_all(dev->dev, dev);

>>   err_dc_cleanup:

>>         dc_ops->cleanup(dev);

>>   err_mode_config_cleanup:

>> @@ -123,7 +135,7 @@ static int kirin_gem_cma_dumb_create(struct drm_file

>> *file,

>>

>>   static struct drm_driver kirin_drm_driver = {

>>         .driver_features        = DRIVER_GEM | DRIVER_MODESET |

>> DRIVER_PRIME |

>> -                                 DRIVER_ATOMIC,

>> +                                 DRIVER_ATOMIC | DRIVER_HAVE_IRQ,

>

>

> DRIVER_IRQ_SHARED should be added here if you want IRQF_SHARED flag set

> when requesting the handler.


If not using the drm_irq_install to set up interrupts,
DRIVER_IRQ_SHARED may not be required to set.

Thanks,
-xinliang

>

> Archit

>

>>         .fops                   = &kirin_drm_fops,

>>         .set_busid              = drm_platform_set_busid,

>>

>>

>

> --

> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,

> a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
index aa2cf75cab39..749382952ab7 100644
--- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
+++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
@@ -292,6 +292,59 @@  static void ade_set_medianoc_qos(struct ade_crtc *acrtc)
 			   SOCKET_QOS_EN, SOCKET_QOS_EN);
 }
 
+static int ade_enable_vblank(struct drm_device *dev, unsigned int pipe)
+{
+	struct kirin_drm_private *priv = dev->dev_private;
+	struct ade_crtc *acrtc = to_ade_crtc(priv->crtc[pipe]);
+	struct ade_hw_ctx *ctx = acrtc->ctx;
+	void __iomem *base = ctx->base;
+
+	if (!ctx->power_on)
+		(void)ade_power_up(ctx);
+
+	ade_update_bits(base + LDI_INT_EN, FRAME_END_INT_EN_OFST,
+			MASK(1), 1);
+
+	return 0;
+}
+
+static void ade_disable_vblank(struct drm_device *dev, unsigned int pipe)
+{
+	struct kirin_drm_private *priv = dev->dev_private;
+	struct ade_crtc *acrtc = to_ade_crtc(priv->crtc[pipe]);
+	struct ade_hw_ctx *ctx = acrtc->ctx;
+	void __iomem *base = ctx->base;
+
+	if (!ctx->power_on) {
+		DRM_ERROR("power is down! vblank disable fail\n");
+		return;
+	}
+
+	ade_update_bits(base + LDI_INT_EN, FRAME_END_INT_EN_OFST,
+			MASK(1), 0);
+}
+
+static irqreturn_t ade_irq_handler(int irq, void *data)
+{
+	struct ade_crtc *acrtc = data;
+	struct ade_hw_ctx *ctx = acrtc->ctx;
+	struct drm_crtc *crtc = &acrtc->base;
+	void __iomem *base = ctx->base;
+	u32 status;
+
+	status = readl(base + LDI_MSK_INT);
+	DRM_DEBUG_VBL("LDI IRQ: status=0x%X\n", status);
+
+	/* vblank irq */
+	if (status & BIT(FRAME_END_INT_EN_OFST)) {
+		ade_update_bits(base + LDI_INT_CLR, FRAME_END_INT_EN_OFST,
+				MASK(1), 1);
+		drm_crtc_handle_vblank(crtc);
+	}
+
+	return IRQ_HANDLED;
+}
+
 static void ade_display_enable(struct ade_crtc *acrtc)
 {
 	struct ade_hw_ctx *ctx = acrtc->ctx;
@@ -967,6 +1020,15 @@  int ade_drm_init(struct drm_device *dev)
 	if (ret)
 		return ret;
 
+	/* vblank irq init */
+	ret = devm_request_irq(dev->dev, ctx->irq, ade_irq_handler,
+			       DRIVER_IRQ_SHARED, dev->driver->name, acrtc);
+	if (ret)
+		return ret;
+	dev->driver->get_vblank_counter = drm_vblank_no_hw_counter;
+	dev->driver->enable_vblank = ade_enable_vblank;
+	dev->driver->disable_vblank = ade_disable_vblank;
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c
index 055729c1889c..723888feb760 100644
--- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c
+++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c
@@ -32,6 +32,7 @@  static int kirin_drm_kms_cleanup(struct drm_device *dev)
 {
 	struct kirin_drm_private *priv = dev->dev_private;
 
+	drm_vblank_cleanup(dev);
 	dc_ops->cleanup(dev);
 	drm_mode_config_cleanup(dev);
 	devm_kfree(dev->dev, priv);
@@ -85,11 +86,22 @@  static int kirin_drm_kms_init(struct drm_device *dev)
 		goto err_dc_cleanup;
 	}
 
+	/* vblank init */
+	ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
+	if (ret) {
+		DRM_ERROR("failed to initialize vblank.\n");
+		goto err_unbind_all;
+	}
+	/* with irq_enabled = true, we can use the vblank feature. */
+	dev->irq_enabled = true;
+
 	/* reset all the states of crtc/plane/encoder/connector */
 	drm_mode_config_reset(dev);
 
 	return 0;
 
+err_unbind_all:
+	component_unbind_all(dev->dev, dev);
 err_dc_cleanup:
 	dc_ops->cleanup(dev);
 err_mode_config_cleanup:
@@ -123,7 +135,7 @@  static int kirin_gem_cma_dumb_create(struct drm_file *file,
 
 static struct drm_driver kirin_drm_driver = {
 	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME |
-				  DRIVER_ATOMIC,
+				  DRIVER_ATOMIC | DRIVER_HAVE_IRQ,
 	.fops			= &kirin_drm_fops,
 	.set_busid		= drm_platform_set_busid,