diff mbox series

[v6,1/4] arm64: dts: qcom: add data-lanes and link-freuencies into dp_out endpoint

Message ID 1669852310-22360-2-git-send-email-quic_khsieh@quicinc.com
State New
Headers show
Series Add data-lanes and link-frequencies to dp_out endpoint | expand

Commit Message

Kuogee Hsieh Nov. 30, 2022, 11:51 p.m. UTC
Move data-lanes property from mdss_dp node to dp_out endpoint. Also
add link-frequencies property into dp_out endpoint as well. The last
frequency specified at link-frequencies will be the max link rate
supported by DP.

Changes in v5:
-- revert changes at sc7180.dtsi and sc7280.dtsi
-- add &dp_out to sc7180-trogdor.dtsi and sc7280-herobrine.dtsi

Changes in v6:
-- add data-lanes and link-frequencies to yaml

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
---
 .../devicetree/bindings/display/msm/dp-controller.yaml  | 17 +++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi            |  6 +++++-
 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi          |  6 +++++-
 3 files changed, 27 insertions(+), 2 deletions(-)

Comments

Dmitry Baryshkov Dec. 1, 2022, 12:07 a.m. UTC | #1
On 01/12/2022 01:51, Kuogee Hsieh wrote:
> Move data-lanes property from mdss_dp node to dp_out endpoint. Also
> add link-frequencies property into dp_out endpoint as well. The last
> frequency specified at link-frequencies will be the max link rate
> supported by DP.
> 
> Changes in v5:
> -- revert changes at sc7180.dtsi and sc7280.dtsi
> -- add &dp_out to sc7180-trogdor.dtsi and sc7280-herobrine.dtsi
> 
> Changes in v6:
> -- add data-lanes and link-frequencies to yaml
> 
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>   .../devicetree/bindings/display/msm/dp-controller.yaml  | 17 +++++++++++++++++

Separate patch. Also you didn't check the get_maintainers output, so 
required parties were not included into the distribution.

Also as you'd check the get_maintainers output, please fix other email 
addresses too.

>   arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi            |  6 +++++-
>   arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi          |  6 +++++-
>   3 files changed, 27 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> index 94bc6e1..af70343 100644
> --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
> @@ -90,6 +90,20 @@ properties:
>           $ref: /schemas/graph.yaml#/properties/port
>           description: Output endpoint of the controller
>   
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +
> +          properties:
> +            link-frequencies: true
> +            data-lanes: true

No. Use $ref for both of them.

> +
> +          required:
> +            - link-frequencies
> +            - data-lanes

No, they are not required.

> +
> +          additionalProperties: false
> +

deprecation of old data-lanes property?

>   required:
>     - compatible
>     - reg
> @@ -158,6 +172,9 @@ examples:
>                   reg = <1>;
>                   endpoint {
>                       remote-endpoint = <&typec>;
> +                    data-lanes = <1 2>;
> +                    link-frequencies = /bits/ 64 <160000000 270000000
> +                                                  540000000 810000000>;

I guess the number of zeroes is wrong here. This is 160 MHz ... 810 Mhz, 
rather than 1.6 GHz ... 8.1 GHz

>                   };
>               };
>           };
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> index 754d2d6..39f0844 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> @@ -812,7 +812,11 @@ hp_i2c: &i2c9 {
>   	status = "okay";
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&dp_hot_plug_det>;
> -	data-lanes = <0 1>;
> +};
> +
> +&dp_out {
> +    data-lanes = <0  1>;
> +    link-frequencies = /bits/ 64 <160000000 270000000 540000000>;

Same comment here.

>   };
>   
>   &pm6150_adc {
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> index 93e39fc..b7c343d 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> @@ -440,7 +440,11 @@ ap_i2c_tpm: &i2c14 {
>   	status = "okay";
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&dp_hot_plug_det>;
> -	data-lanes = <0 1>;
> +};
> +
> +&dp_out {
> +	data-lanes = <0  1>;
> +	link-frequencies = /bits/ 64 <160000000 270000000 540000000 810000000>;

And here.

>   };
>   
>   &mdss_mdp {
Dmitry Baryshkov Dec. 1, 2022, 12:21 a.m. UTC | #2
On 01/12/2022 02:07, Dmitry Baryshkov wrote:
> On 01/12/2022 01:51, Kuogee Hsieh wrote:
>> Move data-lanes property from mdss_dp node to dp_out endpoint. Also
>> add link-frequencies property into dp_out endpoint as well. The last
>> frequency specified at link-frequencies will be the max link rate
>> supported by DP.
>>
>> Changes in v5:
>> -- revert changes at sc7180.dtsi and sc7280.dtsi
>> -- add &dp_out to sc7180-trogdor.dtsi and sc7280-herobrine.dtsi
>>
>> Changes in v6:
>> -- add data-lanes and link-frequencies to yaml
>>
>> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
>> ---
>>   .../devicetree/bindings/display/msm/dp-controller.yaml  | 17 
>> +++++++++++++++++
> 
> Separate patch. Also you didn't check the get_maintainers output, so 
> required parties were not included into the distribution.
> 
> Also as you'd check the get_maintainers output, please fix other email 
> addresses too.
> 
>>   arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi            |  6 +++++-
>>   arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi          |  6 +++++-
>>   3 files changed, 27 insertions(+), 2 deletions(-)
>>
>> diff --git 
>> a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml 
>> b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>> index 94bc6e1..af70343 100644
>> --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>> +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>> @@ -90,6 +90,20 @@ properties:
>>           $ref: /schemas/graph.yaml#/properties/port
>>           description: Output endpoint of the controller
>> +        properties:
>> +          endpoint:
>> +            $ref: /schemas/media/video-interfaces.yaml#
>> +
>> +          properties:
>> +            link-frequencies: true
>> +            data-lanes: true
> 
> No. Use $ref for both of them.
> 
>> +
>> +          required:
>> +            - link-frequencies
>> +            - data-lanes
> 
> No, they are not required.
> 
>> +
>> +          additionalProperties: false
>> +
> 
> deprecation of old data-lanes property?
> 
>>   required:
>>     - compatible
>>     - reg
>> @@ -158,6 +172,9 @@ examples:
>>                   reg = <1>;
>>                   endpoint {
>>                       remote-endpoint = <&typec>;
>> +                    data-lanes = <1 2>;
>> +                    link-frequencies = /bits/ 64 <160000000 270000000

s/1600/1620

>> +                                                  540000000 810000000>;
> 
> I guess the number of zeroes is wrong here. This is 160 MHz ... 810 Mhz, 
> rather than 1.6 GHz ... 8.1 GHz

Ok, I was wrong here. The old code definitely defaults to 570 
mega-something. Now I'd really like to read your description for the 
link-frequencies property, because the phy_configure_opts_dp::link_rate 
is clearly specified in Mb/s and it takes a fixed set of values from 
1.62 Gb/s up to 8.1 Gb/s.

I think the drm_dp_bw_code_to_link_rate() function is incorrect by 
itself, as it multiplies with 27000 (27 Mbps) rather than 270000 (0.27 
Gbps) as required by the standard. So first, we should fix the function, 
then all the rates would become logical.


> 
>>                   };
>>               };
>>           };
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi 
>> b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> index 754d2d6..39f0844 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> @@ -812,7 +812,11 @@ hp_i2c: &i2c9 {
>>       status = "okay";
>>       pinctrl-names = "default";
>>       pinctrl-0 = <&dp_hot_plug_det>;
>> -    data-lanes = <0 1>;
>> +};
>> +
>> +&dp_out {
>> +    data-lanes = <0  1>;
>> +    link-frequencies = /bits/ 64 <160000000 270000000 540000000>;
> 
> Same comment here.
> 
>>   };
>>   &pm6150_adc {
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi 
>> b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>> index 93e39fc..b7c343d 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>> @@ -440,7 +440,11 @@ ap_i2c_tpm: &i2c14 {
>>       status = "okay";
>>       pinctrl-names = "default";
>>       pinctrl-0 = <&dp_hot_plug_det>;
>> -    data-lanes = <0 1>;
>> +};
>> +
>> +&dp_out {
>> +    data-lanes = <0  1>;
>> +    link-frequencies = /bits/ 64 <160000000 270000000 540000000 
>> 810000000>;
> 
> And here.
> 
>>   };
>>   &mdss_mdp {
>
Kuogee Hsieh Dec. 1, 2022, 5:32 p.m. UTC | #3
On 11/30/2022 4:21 PM, Dmitry Baryshkov wrote:
> On 01/12/2022 02:07, Dmitry Baryshkov wrote:
>> On 01/12/2022 01:51, Kuogee Hsieh wrote:
>>> Move data-lanes property from mdss_dp node to dp_out endpoint. Also
>>> add link-frequencies property into dp_out endpoint as well. The last
>>> frequency specified at link-frequencies will be the max link rate
>>> supported by DP.
>>>
>>> Changes in v5:
>>> -- revert changes at sc7180.dtsi and sc7280.dtsi
>>> -- add &dp_out to sc7180-trogdor.dtsi and sc7280-herobrine.dtsi
>>>
>>> Changes in v6:
>>> -- add data-lanes and link-frequencies to yaml
>>>
>>> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
>>> ---
>>>   .../devicetree/bindings/display/msm/dp-controller.yaml  | 17 
>>> +++++++++++++++++
>>
>> Separate patch. Also you didn't check the get_maintainers output, so 
>> required parties were not included into the distribution.
>>
>> Also as you'd check the get_maintainers output, please fix other 
>> email addresses too.
>>
>>> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi            |  6 +++++-
>>>   arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi          |  6 +++++-
>>>   3 files changed, 27 insertions(+), 2 deletions(-)
>>>
>>> diff --git 
>>> a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml 
>>> b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>>> index 94bc6e1..af70343 100644
>>> --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>>> +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>>> @@ -90,6 +90,20 @@ properties:
>>>           $ref: /schemas/graph.yaml#/properties/port
>>>           description: Output endpoint of the controller
>>> +        properties:
>>> +          endpoint:
>>> +            $ref: /schemas/media/video-interfaces.yaml#
>>> +
>>> +          properties:
>>> +            link-frequencies: true
>>> +            data-lanes: true
>>
>> No. Use $ref for both of them.
>>
>>> +
>>> +          required:
>>> +            - link-frequencies
>>> +            - data-lanes
>>
>> No, they are not required.
>>
>>> +
>>> +          additionalProperties: false
>>> +
>>
>> deprecation of old data-lanes property?
>>
>>>   required:
>>>     - compatible
>>>     - reg
>>> @@ -158,6 +172,9 @@ examples:
>>>                   reg = <1>;
>>>                   endpoint {
>>>                       remote-endpoint = <&typec>;
>>> +                    data-lanes = <1 2>;
>>> +                    link-frequencies = /bits/ 64 <160000000 270000000
>
> s/1600/1620
>
>>> + 540000000 810000000>;
>>
>> I guess the number of zeroes is wrong here. This is 160 MHz ... 810 
>> Mhz, rather than 1.6 GHz ... 8.1 GHz
>
> Ok, I was wrong here. The old code definitely defaults to 570 
> mega-something. Now I'd really like to read your description for the 
> link-frequencies property, because the 
> phy_configure_opts_dp::link_rate is clearly specified in Mb/s and it 
> takes a fixed set of values from 1.62 Gb/s up to 8.1 Gb/s.
>
> I think the drm_dp_bw_code_to_link_rate() function is incorrect by 
> itself, as it multiplies with 27000 (27 Mbps) rather than 270000 (0.27 
> Gbps) as required by the standard. So first, we should fix the 
> function, then all the rates would become logical.

no, drm_dp_bw_code_to_link_rate() is correct and should not be changes 
since it impact to other dp drivers too.

0.27Gbps/lane is specified at DP spec.

DP use 8b/10b coding rule (10 bits symbol contains 8 bits data).


>
>
>>
>>>                   };
>>>               };
>>>           };
>>> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi 
>>> b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>>> index 754d2d6..39f0844 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>>> @@ -812,7 +812,11 @@ hp_i2c: &i2c9 {
>>>       status = "okay";
>>>       pinctrl-names = "default";
>>>       pinctrl-0 = <&dp_hot_plug_det>;
>>> -    data-lanes = <0 1>;
>>> +};
>>> +
>>> +&dp_out {
>>> +    data-lanes = <0  1>;
>>> +    link-frequencies = /bits/ 64 <160000000 270000000 540000000>;
>>
>> Same comment here.
>>
>>>   };
>>>   &pm6150_adc {
>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi 
>>> b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>>> index 93e39fc..b7c343d 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>>> @@ -440,7 +440,11 @@ ap_i2c_tpm: &i2c14 {
>>>       status = "okay";
>>>       pinctrl-names = "default";
>>>       pinctrl-0 = <&dp_hot_plug_det>;
>>> -    data-lanes = <0 1>;
>>> +};
>>> +
>>> +&dp_out {
>>> +    data-lanes = <0  1>;
>>> +    link-frequencies = /bits/ 64 <160000000 270000000 540000000 
>>> 810000000>;
>>
>> And here.
>>
>>>   };
>>>   &mdss_mdp {
>>
>
Kuogee Hsieh Dec. 1, 2022, 5:34 p.m. UTC | #4
On 11/30/2022 4:07 PM, Dmitry Baryshkov wrote:
> On 01/12/2022 01:51, Kuogee Hsieh wrote:
>> Move data-lanes property from mdss_dp node to dp_out endpoint. Also
>> add link-frequencies property into dp_out endpoint as well. The last
>> frequency specified at link-frequencies will be the max link rate
>> supported by DP.
>>
>> Changes in v5:
>> -- revert changes at sc7180.dtsi and sc7280.dtsi
>> -- add &dp_out to sc7180-trogdor.dtsi and sc7280-herobrine.dtsi
>>
>> Changes in v6:
>> -- add data-lanes and link-frequencies to yaml
>>
>> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
>> ---
>>   .../devicetree/bindings/display/msm/dp-controller.yaml  | 17 
>> +++++++++++++++++
>
> Separate patch. Also you didn't check the get_maintainers output, so 
> required parties were not included into the distribution.
>
> Also as you'd check the get_maintainers output, please fix other email 
> addresses too.
>
>> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi            |  6 +++++-
>>   arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi          |  6 +++++-
>>   3 files changed, 27 insertions(+), 2 deletions(-)
>>
>> diff --git 
>> a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml 
>> b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>> index 94bc6e1..af70343 100644
>> --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>> +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>> @@ -90,6 +90,20 @@ properties:
>>           $ref: /schemas/graph.yaml#/properties/port
>>           description: Output endpoint of the controller
>>   +        properties:
>> +          endpoint:
>> +            $ref: /schemas/media/video-interfaces.yaml#
>> +
>> +          properties:
>> +            link-frequencies: true
>> +            data-lanes: true
>
> No. Use $ref for both of them.
>
>> +
>> +          required:
>> +            - link-frequencies
>> +            - data-lanes
>
> No, they are not required.
>
>> +
>> +          additionalProperties: false
>> +
>
> deprecation of old data-lanes property?
there is no old data-lanes property.
>
>>   required:
>>     - compatible
>>     - reg
>> @@ -158,6 +172,9 @@ examples:
>>                   reg = <1>;
>>                   endpoint {
>>                       remote-endpoint = <&typec>;
>> +                    data-lanes = <1 2>;
>> +                    link-frequencies = /bits/ 64 <160000000 270000000
>> +                                                  540000000 810000000>;
>
> I guess the number of zeroes is wrong here. This is 160 MHz ... 810 
> Mhz, rather than 1.6 GHz ... 8.1 GHz
>
>>                   };
>>               };
>>           };
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi 
>> b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> index 754d2d6..39f0844 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> @@ -812,7 +812,11 @@ hp_i2c: &i2c9 {
>>       status = "okay";
>>       pinctrl-names = "default";
>>       pinctrl-0 = <&dp_hot_plug_det>;
>> -    data-lanes = <0 1>;
>> +};
>> +
>> +&dp_out {
>> +    data-lanes = <0  1>;
>> +    link-frequencies = /bits/ 64 <160000000 270000000 540000000>;
>
> Same comment here.
>
>>   };
>>     &pm6150_adc {
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi 
>> b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>> index 93e39fc..b7c343d 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>> @@ -440,7 +440,11 @@ ap_i2c_tpm: &i2c14 {
>>       status = "okay";
>>       pinctrl-names = "default";
>>       pinctrl-0 = <&dp_hot_plug_det>;
>> -    data-lanes = <0 1>;
>> +};
>> +
>> +&dp_out {
>> +    data-lanes = <0  1>;
>> +    link-frequencies = /bits/ 64 <160000000 270000000 540000000 
>> 810000000>;
>
> And here.
>
>>   };
>>     &mdss_mdp {
>
Dmitry Baryshkov Dec. 1, 2022, 5:36 p.m. UTC | #5
On 01/12/2022 19:34, Kuogee Hsieh wrote:
> 
> On 11/30/2022 4:07 PM, Dmitry Baryshkov wrote:
>> On 01/12/2022 01:51, Kuogee Hsieh wrote:
>>> Move data-lanes property from mdss_dp node to dp_out endpoint. Also
>>> add link-frequencies property into dp_out endpoint as well. The last
>>> frequency specified at link-frequencies will be the max link rate
>>> supported by DP.
>>>
>>> Changes in v5:
>>> -- revert changes at sc7180.dtsi and sc7280.dtsi
>>> -- add &dp_out to sc7180-trogdor.dtsi and sc7280-herobrine.dtsi
>>>
>>> Changes in v6:
>>> -- add data-lanes and link-frequencies to yaml
>>>
>>> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
>>> ---
>>>   .../devicetree/bindings/display/msm/dp-controller.yaml  | 17 
>>> +++++++++++++++++
>>
>> Separate patch. Also you didn't check the get_maintainers output, so 
>> required parties were not included into the distribution.
>>
>> Also as you'd check the get_maintainers output, please fix other email 
>> addresses too.
>>
>>> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi            |  6 +++++-
>>>   arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi          |  6 +++++-
>>>   3 files changed, 27 insertions(+), 2 deletions(-)
>>>
>>> diff --git 
>>> a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml 
>>> b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>>> index 94bc6e1..af70343 100644
>>> --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>>> +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>>> @@ -90,6 +90,20 @@ properties:
>>>           $ref: /schemas/graph.yaml#/properties/port
>>>           description: Output endpoint of the controller
>>>   +        properties:
>>> +          endpoint:
>>> +            $ref: /schemas/media/video-interfaces.yaml#
>>> +
>>> +          properties:
>>> +            link-frequencies: true
>>> +            data-lanes: true
>>
>> No. Use $ref for both of them.
>>
>>> +
>>> +          required:
>>> +            - link-frequencies
>>> +            - data-lanes
>>
>> No, they are not required.
>>
>>> +
>>> +          additionalProperties: false
>>> +
>>
>> deprecation of old data-lanes property?
> there is no old data-lanes property.

There is one:

$ grep -n data-lanes 
Documentation/devicetree/bindings/display/msm/dp-controller.yaml
82:  data-lanes:
Dmitry Baryshkov Dec. 1, 2022, 5:49 p.m. UTC | #6
On 01/12/2022 19:32, Kuogee Hsieh wrote:
> 
> On 11/30/2022 4:21 PM, Dmitry Baryshkov wrote:
>> On 01/12/2022 02:07, Dmitry Baryshkov wrote:
>>> On 01/12/2022 01:51, Kuogee Hsieh wrote:
>>>> Move data-lanes property from mdss_dp node to dp_out endpoint. Also
>>>> add link-frequencies property into dp_out endpoint as well. The last
>>>> frequency specified at link-frequencies will be the max link rate
>>>> supported by DP.
>>>>
>>>> Changes in v5:
>>>> -- revert changes at sc7180.dtsi and sc7280.dtsi
>>>> -- add &dp_out to sc7180-trogdor.dtsi and sc7280-herobrine.dtsi
>>>>
>>>> Changes in v6:
>>>> -- add data-lanes and link-frequencies to yaml
>>>>
>>>> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
>>>> ---
>>>>   .../devicetree/bindings/display/msm/dp-controller.yaml  | 17 
>>>> +++++++++++++++++
>>>
>>> Separate patch. Also you didn't check the get_maintainers output, so 
>>> required parties were not included into the distribution.
>>>
>>> Also as you'd check the get_maintainers output, please fix other 
>>> email addresses too.
>>>
>>>> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi            |  6 +++++-
>>>>   arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi          |  6 +++++-
>>>>   3 files changed, 27 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git 
>>>> a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml 
>>>> b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>>>> index 94bc6e1..af70343 100644
>>>> --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>>>> +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>>>> @@ -90,6 +90,20 @@ properties:
>>>>           $ref: /schemas/graph.yaml#/properties/port
>>>>           description: Output endpoint of the controller
>>>> +        properties:
>>>> +          endpoint:
>>>> +            $ref: /schemas/media/video-interfaces.yaml#
>>>> +
>>>> +          properties:
>>>> +            link-frequencies: true
>>>> +            data-lanes: true
>>>
>>> No. Use $ref for both of them.
>>>
>>>> +
>>>> +          required:
>>>> +            - link-frequencies
>>>> +            - data-lanes
>>>
>>> No, they are not required.
>>>
>>>> +
>>>> +          additionalProperties: false
>>>> +
>>>
>>> deprecation of old data-lanes property?
>>>
>>>>   required:
>>>>     - compatible
>>>>     - reg
>>>> @@ -158,6 +172,9 @@ examples:
>>>>                   reg = <1>;
>>>>                   endpoint {
>>>>                       remote-endpoint = <&typec>;
>>>> +                    data-lanes = <1 2>;
>>>> +                    link-frequencies = /bits/ 64 <160000000 270000000
>>
>> s/1600/1620
>>
>>>> + 540000000 810000000>;
>>>
>>> I guess the number of zeroes is wrong here. This is 160 MHz ... 810 
>>> Mhz, rather than 1.6 GHz ... 8.1 GHz
>>
>> Ok, I was wrong here. The old code definitely defaults to 570 
>> mega-something. Now I'd really like to read your description for the 
>> link-frequencies property, because the 
>> phy_configure_opts_dp::link_rate is clearly specified in Mb/s and it 
>> takes a fixed set of values from 1.62 Gb/s up to 8.1 Gb/s.
>>
>> I think the drm_dp_bw_code_to_link_rate() function is incorrect by 
>> itself, as it multiplies with 27000 (27 Mbps) rather than 270000 (0.27 
>> Gbps) as required by the standard. So first, we should fix the 
>> function, then all the rates would become logical.
> 
> no, drm_dp_bw_code_to_link_rate() is correct and should not be changes 
> since it impact to other dp drivers too.
> 
> 0.27Gbps/lane is specified at DP spec.
> 
> DP use 8b/10b coding rule (10 bits symbol contains 8 bits data).

At least it should get documentation that it returns Kylo-bytes per second.

But, getting back to link-frequencies. The documentation clearly says 
that it should be allowed data bus _frequencies_. And frequencies are 
measured in Hz, not in bits/sec or bytes/sec.


>>>>                   };
>>>>               };
>>>>           };
>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi 
>>>> b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>>>> index 754d2d6..39f0844 100644
>>>> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>>>> @@ -812,7 +812,11 @@ hp_i2c: &i2c9 {
>>>>       status = "okay";
>>>>       pinctrl-names = "default";
>>>>       pinctrl-0 = <&dp_hot_plug_det>;
>>>> -    data-lanes = <0 1>;
>>>> +};
>>>> +
>>>> +&dp_out {
>>>> +    data-lanes = <0  1>;
>>>> +    link-frequencies = /bits/ 64 <160000000 270000000 540000000>;
>>>
>>> Same comment here.
>>>
>>>>   };
>>>>   &pm6150_adc {
>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi 
>>>> b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>>>> index 93e39fc..b7c343d 100644
>>>> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>>>> @@ -440,7 +440,11 @@ ap_i2c_tpm: &i2c14 {
>>>>       status = "okay";
>>>>       pinctrl-names = "default";
>>>>       pinctrl-0 = <&dp_hot_plug_det>;
>>>> -    data-lanes = <0 1>;
>>>> +};
>>>> +
>>>> +&dp_out {
>>>> +    data-lanes = <0  1>;
>>>> +    link-frequencies = /bits/ 64 <160000000 270000000 540000000 
>>>> 810000000>;
>>>
>>> And here.
>>>
>>>>   };
>>>>   &mdss_mdp {
>>>
>>
Kuogee Hsieh Dec. 1, 2022, 8:59 p.m. UTC | #7
On 12/1/2022 9:49 AM, Dmitry Baryshkov wrote:
> On 01/12/2022 19:32, Kuogee Hsieh wrote:
>>
>> On 11/30/2022 4:21 PM, Dmitry Baryshkov wrote:
>>> On 01/12/2022 02:07, Dmitry Baryshkov wrote:
>>>> On 01/12/2022 01:51, Kuogee Hsieh wrote:
>>>>> Move data-lanes property from mdss_dp node to dp_out endpoint. Also
>>>>> add link-frequencies property into dp_out endpoint as well. The last
>>>>> frequency specified at link-frequencies will be the max link rate
>>>>> supported by DP.
>>>>>
>>>>> Changes in v5:
>>>>> -- revert changes at sc7180.dtsi and sc7280.dtsi
>>>>> -- add &dp_out to sc7180-trogdor.dtsi and sc7280-herobrine.dtsi
>>>>>
>>>>> Changes in v6:
>>>>> -- add data-lanes and link-frequencies to yaml
>>>>>
>>>>> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
>>>>> ---
>>>>>   .../devicetree/bindings/display/msm/dp-controller.yaml | 17 
>>>>> +++++++++++++++++
>>>>
>>>> Separate patch. Also you didn't check the get_maintainers output, 
>>>> so required parties were not included into the distribution.
>>>>
>>>> Also as you'd check the get_maintainers output, please fix other 
>>>> email addresses too.
>>>>
>>>>> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi |  6 +++++-
>>>>>   arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi |  6 +++++-
>>>>>   3 files changed, 27 insertions(+), 2 deletions(-)
>>>>>
>>>>> diff --git 
>>>>> a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml 
>>>>> b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>>>>> index 94bc6e1..af70343 100644
>>>>> --- 
>>>>> a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>>>>> +++ 
>>>>> b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>>>>> @@ -90,6 +90,20 @@ properties:
>>>>>           $ref: /schemas/graph.yaml#/properties/port
>>>>>           description: Output endpoint of the controller
>>>>> +        properties:
>>>>> +          endpoint:
>>>>> +            $ref: /schemas/media/video-interfaces.yaml#
>>>>> +
>>>>> +          properties:
>>>>> +            link-frequencies: true
>>>>> +            data-lanes: true
>>>>
>>>> No. Use $ref for both of them.
>>>>
>>>>> +
>>>>> +          required:
>>>>> +            - link-frequencies
>>>>> +            - data-lanes
>>>>
>>>> No, they are not required.
>>>>
>>>>> +
>>>>> +          additionalProperties: false
>>>>> +
>>>>
>>>> deprecation of old data-lanes property?
>>>>
>>>>>   required:
>>>>>     - compatible
>>>>>     - reg
>>>>> @@ -158,6 +172,9 @@ examples:
>>>>>                   reg = <1>;
>>>>>                   endpoint {
>>>>>                       remote-endpoint = <&typec>;
>>>>> +                    data-lanes = <1 2>;
>>>>> +                    link-frequencies = /bits/ 64 <160000000 
>>>>> 270000000
>>>
>>> s/1600/1620
>>>
>>>>> + 540000000 810000000>;
>>>>
>>>> I guess the number of zeroes is wrong here. This is 160 MHz ... 810 
>>>> Mhz, rather than 1.6 GHz ... 8.1 GHz
>>>
>>> Ok, I was wrong here. The old code definitely defaults to 570 
>>> mega-something. Now I'd really like to read your description for the 
>>> link-frequencies property, because the 
>>> phy_configure_opts_dp::link_rate is clearly specified in Mb/s and it 
>>> takes a fixed set of values from 1.62 Gb/s up to 8.1 Gb/s.
>>>
>>> I think the drm_dp_bw_code_to_link_rate() function is incorrect by 
>>> itself, as it multiplies with 27000 (27 Mbps) rather than 270000 
>>> (0.27 Gbps) as required by the standard. So first, we should fix the 
>>> function, then all the rates would become logical.
>>
>> no, drm_dp_bw_code_to_link_rate() is correct and should not be 
>> changes since it impact to other dp drivers too.
>>
>> 0.27Gbps/lane is specified at DP spec.
>>
>> DP use 8b/10b coding rule (10 bits symbol contains 8 bits data).
>
> At least it should get documentation that it returns Kylo-bytes per 
> second.
>
> But, getting back to link-frequencies. The documentation clearly says 
> that it should be allowed data bus _frequencies_. And frequencies are 
> measured in Hz, not in bits/sec or bytes/sec.

ok, in the case, we can specify link frequency (symbol rate), such as 
81000000000 (8.1G hz), at dtsi to match link-frequencies cocumentation.

then at parser, we have to divided by 10 to convert back to link rate 
and then divided by 1000 to  convert to kb.

is this work for you?

>
>
>>>>>                   };
>>>>>               };
>>>>>           };
>>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi 
>>>>> b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>>>>> index 754d2d6..39f0844 100644
>>>>> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>>>>> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>>>>> @@ -812,7 +812,11 @@ hp_i2c: &i2c9 {
>>>>>       status = "okay";
>>>>>       pinctrl-names = "default";
>>>>>       pinctrl-0 = <&dp_hot_plug_det>;
>>>>> -    data-lanes = <0 1>;
>>>>> +};
>>>>> +
>>>>> +&dp_out {
>>>>> +    data-lanes = <0  1>;
>>>>> +    link-frequencies = /bits/ 64 <160000000 270000000 540000000>;
>>>>
>>>> Same comment here.
>>>>
>>>>>   };
>>>>>   &pm6150_adc {
>>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi 
>>>>> b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>>>>> index 93e39fc..b7c343d 100644
>>>>> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>>>>> @@ -440,7 +440,11 @@ ap_i2c_tpm: &i2c14 {
>>>>>       status = "okay";
>>>>>       pinctrl-names = "default";
>>>>>       pinctrl-0 = <&dp_hot_plug_det>;
>>>>> -    data-lanes = <0 1>;
>>>>> +};
>>>>> +
>>>>> +&dp_out {
>>>>> +    data-lanes = <0  1>;
>>>>> +    link-frequencies = /bits/ 64 <160000000 270000000 540000000 
>>>>> 810000000>;
>>>>
>>>> And here.
>>>>
>>>>>   };
>>>>>   &mdss_mdp {
>>>>
>>>
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index 94bc6e1..af70343 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -90,6 +90,20 @@  properties:
         $ref: /schemas/graph.yaml#/properties/port
         description: Output endpoint of the controller
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+
+          properties:
+            link-frequencies: true
+            data-lanes: true
+
+          required:
+            - link-frequencies
+            - data-lanes
+
+          additionalProperties: false
+
 required:
   - compatible
   - reg
@@ -158,6 +172,9 @@  examples:
                 reg = <1>;
                 endpoint {
                     remote-endpoint = <&typec>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <160000000 270000000
+                                                  540000000 810000000>;
                 };
             };
         };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 754d2d6..39f0844 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -812,7 +812,11 @@  hp_i2c: &i2c9 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hot_plug_det>;
-	data-lanes = <0 1>;
+};
+
+&dp_out {
+    data-lanes = <0  1>;
+    link-frequencies = /bits/ 64 <160000000 270000000 540000000>;
 };
 
 &pm6150_adc {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 93e39fc..b7c343d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -440,7 +440,11 @@  ap_i2c_tpm: &i2c14 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hot_plug_det>;
-	data-lanes = <0 1>;
+};
+
+&dp_out {
+	data-lanes = <0  1>;
+	link-frequencies = /bits/ 64 <160000000 270000000 540000000 810000000>;
 };
 
 &mdss_mdp {