diff mbox series

pinctrl: sunxi: d1: Add CAN bus pinmuxes

Message ID 20221126191636.6673-1-samuel@sholland.org
State New
Headers show
Series pinctrl: sunxi: d1: Add CAN bus pinmuxes | expand

Commit Message

Samuel Holland Nov. 26, 2022, 7:16 p.m. UTC 
From: Fabien Poussin <fabien.poussin@gmail.com>

The D1 pin controller contains muxes for two CAN buses. While the CAN
bus controllers are only documented for the T113 SoC, the pin controller
is the same across all SoC variants.

Signed-off-by: Fabien Poussin <fabien.poussin@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---

 drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Linus Walleij Nov. 26, 2022, 9:59 p.m. UTC | #1 
On Sat, Nov 26, 2022 at 8:16 PM Samuel Holland <samuel@sholland.org> wrote:

> From: Fabien Poussin <fabien.poussin@gmail.com>
>
> The D1 pin controller contains muxes for two CAN buses. While the CAN
> bus controllers are only documented for the T113 SoC, the pin controller
> is the same across all SoC variants.
>
> Signed-off-by: Fabien Poussin <fabien.poussin@gmail.com>
> Signed-off-by: Samuel Holland <samuel@sholland.org>

Patch applied so we get some linux-next rotation on this before
the merge window. If someone protests, I can always pull it out.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c b/drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c
index 40858b881298..9cc94be1046d 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c
@@ -47,6 +47,7 @@  static const struct sunxi_desc_pin d1_pins[] = {
 		SUNXI_FUNCTION(0x5, "i2s2_din"),	/* DIN2 */
 		SUNXI_FUNCTION(0x6, "lcd0"),		/* D18 */
 		SUNXI_FUNCTION(0x7, "uart4"),		/* TX */
+		SUNXI_FUNCTION(0x8, "can0"),		/* TX */
 		SUNXI_FUNCTION_IRQ_BANK(0xe, 0, 2)),
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 3),
 		SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -57,6 +58,7 @@  static const struct sunxi_desc_pin d1_pins[] = {
 		SUNXI_FUNCTION(0x5, "i2s2_din"),	/* DIN0 */
 		SUNXI_FUNCTION(0x6, "lcd0"),		/* D19 */
 		SUNXI_FUNCTION(0x7, "uart4"),		/* RX */
+		SUNXI_FUNCTION(0x8, "can0"),		/* RX */
 		SUNXI_FUNCTION_IRQ_BANK(0xe, 0, 3)),
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 4),
 		SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -67,6 +69,7 @@  static const struct sunxi_desc_pin d1_pins[] = {
 		SUNXI_FUNCTION(0x5, "i2s2_din"),	/* DIN1 */
 		SUNXI_FUNCTION(0x6, "lcd0"),		/* D20 */
 		SUNXI_FUNCTION(0x7, "uart5"),		/* TX */
+		SUNXI_FUNCTION(0x8, "can1"),		/* TX */
 		SUNXI_FUNCTION_IRQ_BANK(0xe, 0, 4)),
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 5),
 		SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -77,6 +80,7 @@  static const struct sunxi_desc_pin d1_pins[] = {
 		SUNXI_FUNCTION(0x5, "pwm0"),
 		SUNXI_FUNCTION(0x6, "lcd0"),		/* D21 */
 		SUNXI_FUNCTION(0x7, "uart5"),		/* RX */
+		SUNXI_FUNCTION(0x8, "can1"),		/* RX */
 		SUNXI_FUNCTION_IRQ_BANK(0xe, 0, 5)),
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 6),
 		SUNXI_FUNCTION(0x0, "gpio_in"),