@@ -31,37 +31,37 @@ reset-button {
leds {
compatible = "gpio-leds";
- ethernet {
+ led-ethernet {
label = "gatwick:yellow:ethernet";
gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- wifi {
+ led-wifi {
label = "gatwick:green:wifi";
gpios = <&pioA 28 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- ble {
+ led-ble {
label = "gatwick:blue:ble";
gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- lora {
+ led-lora {
label = "gatwick:orange:lora";
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- blank {
+ led-blank {
label = "gatwick:green:blank";
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- user {
+ led-user {
label = "gatwick:yellow:user";
gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
default-state = "off";
@@ -498,17 +498,17 @@ leds {
pinctrl-0 = <&pinctrl_led_gpio_default>;
status = "okay"; /* Conflict with pwm0. */
- red {
+ led-red {
label = "red";
gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
};
- green {
+ led-green {
label = "green";
gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
};
- blue {
+ led-blue {
label = "blue";
gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
@@ -46,17 +46,17 @@ leds {
pinctrl-0 = <&pinctrl_led_gpio_default>;
status = "okay";
- red {
+ led-red {
label = "red";
gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>;
};
- green {
+ led-green {
label = "green";
gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
};
- blue {
+ led-blue {
label = "blue";
gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
@@ -62,17 +62,17 @@ leds {
pinctrl-0 = <&pinctrl_led_gpio_default>;
status = "okay"; /* conflict with pwm0 */
- red {
+ led-red {
label = "red";
gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>;
};
- green {
+ led-green {
label = "green";
gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
};
- blue {
+ led-blue {
label = "blue";
gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
@@ -416,17 +416,17 @@ leds {
pinctrl-0 = <&pinctrl_led_gpio_default>;
status = "okay";
- red {
+ led-red {
label = "red";
gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>;
};
- green {
+ led-green {
label = "green";
gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
};
- blue {
+ led-blue {
label = "blue";
gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
@@ -725,18 +725,18 @@ leds {
pinctrl-0 = <&pinctrl_led_gpio_default>;
status = "okay"; /* conflict with pwm0 */
- red {
+ led-red {
label = "red";
gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
};
- green {
+ led-green {
label = "green";
gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
};
- blue {
+ led-blue {
label = "blue";
gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
@@ -392,13 +392,13 @@ leds {
pinctrl-0 = <&pinctrl_gpio_leds>;
status = "okay";
- d2 {
+ led-d2 {
label = "d2";
gpios = <&pioE 23 GPIO_ACTIVE_LOW>; /* PE23, conflicts with A23, CTS2 */
linux,default-trigger = "heartbeat";
};
- d3 {
+ led-d3 {
label = "d3"; /* Conflict with EBI CS0, USART2 CTS. */
gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
};
@@ -115,19 +115,19 @@ leds {
compatible = "gpio-leds";
status = "okay";
- user1 {
+ led-user1 {
label = "user1";
gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- user2 {
+ led-user2 {
label = "user2";
gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- user3 {
+ led-user3 {
label = "user3";
gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
@@ -262,13 +262,13 @@ leds {
pinctrl-0 = <&pinctrl_gpio_leds>;
status = "okay";
- d8 {
+ led-d8 {
label = "d8";
gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- d10 {
+ led-d10 {
label = "d10";
gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
@@ -287,18 +287,18 @@ leds {
compatible = "gpio-leds";
status = "okay";
- d8 {
+ led-d8 {
label = "d8";
/* PE28, conflicts with usart4 rts pin */
gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
};
- d9 {
+ led-d9 {
label = "d9";
gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
};
- d10 {
+ led-d10 {
label = "d10";
gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
@@ -106,35 +106,35 @@ envelope-detector-mux {
leds {
compatible = "gpio-leds";
- ch1-red {
+ led-ch1-red {
label = "ch-1:red";
gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
};
- ch1-green {
+ led-ch1-green {
label = "ch-1:green";
gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
};
- ch2-red {
+ led-ch2-red {
label = "ch-2:red";
gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
};
- ch2-green {
+ led-ch2-green {
label = "ch-2:green";
gpios = <&pioA 20 GPIO_ACTIVE_LOW>;
};
- data-red {
+ led-data-red {
label = "data:red";
gpios = <&pioA 19 GPIO_ACTIVE_LOW>;
};
- data-green {
+ led-data-green {
label = "data:green";
gpios = <&pioA 18 GPIO_ACTIVE_LOW>;
};
- alarm-red {
+ led-alarm-red {
label = "alarm:red";
gpios = <&pioA 17 GPIO_ACTIVE_LOW>;
};
- alarm-green {
+ led-alarm-green {
label = "alarm:green";
gpios = <&pioA 16 GPIO_ACTIVE_LOW>;
};
@@ -40,7 +40,7 @@ macb1: ethernet@f802c000 {
};
leds {
- d3 {
+ led-d3 {
label = "d3";
gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
};
@@ -50,7 +50,7 @@ macb0: ethernet@f0028000 {
};
leds {
- d3 {
+ led-d3 {
label = "d3";
gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
};
@@ -130,7 +130,7 @@ rootfs@800000 {
leds {
compatible = "gpio-leds";
- d2 {
+ led-d2 {
label = "d2";
gpios = <&pioE 25 GPIO_ACTIVE_LOW>; /* PE25, conflicts with A25, RXD2 */
linux,default-trigger = "heartbeat";
@@ -184,7 +184,7 @@ rootfs@800000 {
leds {
compatible = "gpio-leds";
- d2 {
+ led-d2 {
label = "d2";
gpios = <&pioE 25 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
The node names should be generic and DT schema expects certain pattern: at91-sama5d2_ptc_ek.dtb: leds: 'blue', 'green', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm/boot/dts/at91-gatwick.dts | 12 ++++++------ arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 6 +++--- arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts | 6 +++--- arch/arm/boot/dts/at91-sama5d2_icp.dts | 6 +++--- arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 6 +++--- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 6 +++--- arch/arm/boot/dts/at91-sama5d3_xplained.dts | 4 ++-- arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts | 6 +++--- arch/arm/boot/dts/at91-sama5d4_xplained.dts | 4 ++-- arch/arm/boot/dts/at91-sama5d4ek.dts | 6 +++--- arch/arm/boot/dts/at91-tse850-3.dts | 16 ++++++++-------- arch/arm/boot/dts/sama5d31ek.dts | 2 +- arch/arm/boot/dts/sama5d34ek.dts | 2 +- arch/arm/boot/dts/sama5d3xcm.dtsi | 2 +- arch/arm/boot/dts/sama5d3xcm_cmp.dtsi | 2 +- 15 files changed, 43 insertions(+), 43 deletions(-)