diff mbox series

[V2,11/17] Documentation: Replace del_timer/del_timer_sync()

Message ID 20221122173648.737720888@linutronix.de
State Superseded
Headers show
Series timers: Provide timer_shutdown[_sync]() | expand

Commit Message

Thomas Gleixner Nov. 22, 2022, 5:45 p.m. UTC
Adjust to the new preferred function names.

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 Documentation/RCU/Design/Requirements/Requirements.rst      |    2 +-
 Documentation/core-api/local_ops.rst                        |    2 +-
 Documentation/kernel-hacking/locking.rst                    |   11 +++++------
 Documentation/timers/hrtimers.rst                           |    2 +-
 Documentation/translations/it_IT/kernel-hacking/locking.rst |   10 +++++-----
 Documentation/translations/zh_CN/core-api/local_ops.rst     |    2 +-
 6 files changed, 14 insertions(+), 15 deletions(-)
diff mbox series

Patch

--- a/Documentation/RCU/Design/Requirements/Requirements.rst
+++ b/Documentation/RCU/Design/Requirements/Requirements.rst
@@ -1858,7 +1858,7 @@  unloaded. After a given module has been
 one of its functions results in a segmentation fault. The module-unload
 functions must therefore cancel any delayed calls to loadable-module
 functions, for example, any outstanding mod_timer() must be dealt
-with via del_timer_sync() or similar.
+with via timer_delete_sync() or similar.
 
 Unfortunately, there is no way to cancel an RCU callback; once you
 invoke call_rcu(), the callback function is eventually going to be
--- a/Documentation/core-api/local_ops.rst
+++ b/Documentation/core-api/local_ops.rst
@@ -191,7 +191,7 @@  Here is a sample module which implements
 
     static void __exit test_exit(void)
     {
-            del_timer_sync(&test_timer);
+            timer_delete_sync(&test_timer);
     }
 
     module_init(test_init);
--- a/Documentation/kernel-hacking/locking.rst
+++ b/Documentation/kernel-hacking/locking.rst
@@ -967,7 +967,7 @@  If you want to destroy the entire collec
 
             while (list) {
                     struct foo *next = list->next;
-                    del_timer(&list->timer);
+                    timer_delete(&list->timer);
                     kfree(list);
                     list = next;
             }
@@ -981,7 +981,7 @@  the lock after we spin_unlock_bh(), and
 the element (which has already been freed!).
 
 This can be avoided by checking the result of
-del_timer(): if it returns 1, the timer has been deleted.
+timer_delete(): if it returns 1, the timer has been deleted.
 If 0, it means (in this case) that it is currently running, so we can
 do::
 
@@ -990,7 +990,7 @@  If 0, it means (in this case) that it is
 
                     while (list) {
                             struct foo *next = list->next;
-                            if (!del_timer(&list->timer)) {
+                            if (!timer_delete(&list->timer)) {
                                     /* Give timer a chance to delete this */
                                     spin_unlock_bh(&list_lock);
                                     goto retry;
@@ -1005,8 +1005,7 @@  If 0, it means (in this case) that it is
 Another common problem is deleting timers which restart themselves (by
 calling add_timer() at the end of their timer function).
 Because this is a fairly common case which is prone to races, you should
-use del_timer_sync() (``include/linux/timer.h``) to
-handle this case.
+use timer_delete_sync() (``include/linux/timer.h``) to handle this case.
 
 Locking Speed
 =============
@@ -1334,7 +1333,7 @@  lock.
 
 -  kfree()
 
--  add_timer() and del_timer()
+-  add_timer() and timer_delete()
 
 Mutex API reference
 ===================
--- a/Documentation/timers/hrtimers.rst
+++ b/Documentation/timers/hrtimers.rst
@@ -118,7 +118,7 @@  existing timer wheel code, as it is matu
 was not really a win, due to the different data structures. Also, the
 hrtimer functions now have clearer behavior and clearer names - such as
 hrtimer_try_to_cancel() and hrtimer_cancel() [which are roughly
-equivalent to del_timer() and del_timer_sync()] - so there's no direct
+equivalent to timer_delete() and timer_delete_sync()] - so there's no direct
 1:1 mapping between them on the algorithmic level, and thus no real
 potential for code sharing either.
 
--- a/Documentation/translations/it_IT/kernel-hacking/locking.rst
+++ b/Documentation/translations/it_IT/kernel-hacking/locking.rst
@@ -990,7 +990,7 @@  Se volete eliminare l'intera collezione
 
             while (list) {
                     struct foo *next = list->next;
-                    del_timer(&list->timer);
+                    timer_delete(&list->timer);
                     kfree(list);
                     list = next;
             }
@@ -1003,7 +1003,7 @@  e prenderà il *lock* solo dopo spin_unl
 di eliminare il suo oggetto (che però è già stato eliminato).
 
 Questo può essere evitato controllando il valore di ritorno di
-del_timer(): se ritorna 1, il temporizzatore è stato già
+timer_delete(): se ritorna 1, il temporizzatore è stato già
 rimosso. Se 0, significa (in questo caso) che il temporizzatore è in
 esecuzione, quindi possiamo fare come segue::
 
@@ -1012,7 +1012,7 @@  rimosso. Se 0, significa (in questo caso
 
                     while (list) {
                             struct foo *next = list->next;
-                            if (!del_timer(&list->timer)) {
+                            if (!timer_delete(&list->timer)) {
                                     /* Give timer a chance to delete this */
                                     spin_unlock_bh(&list_lock);
                                     goto retry;
@@ -1026,7 +1026,7 @@  rimosso. Se 0, significa (in questo caso
 Un altro problema è l'eliminazione dei temporizzatori che si riavviano
 da soli (chiamando add_timer() alla fine della loro esecuzione).
 Dato che questo è un problema abbastanza comune con una propensione
-alle corse critiche, dovreste usare del_timer_sync()
+alle corse critiche, dovreste usare timer_delete_sync()
 (``include/linux/timer.h``) per gestire questo caso.
 
 Velocità della sincronizzazione
@@ -1372,7 +1372,7 @@  contesto, o trattenendo un qualsiasi *lo
 
 -  kfree()
 
--  add_timer() e del_timer()
+-  add_timer() e timer_delete()
 
 Riferimento per l'API dei Mutex
 ===============================
--- a/Documentation/translations/zh_CN/core-api/local_ops.rst
+++ b/Documentation/translations/zh_CN/core-api/local_ops.rst
@@ -185,7 +185,7 @@  UP之间没有不同的行为,在你�
 
     static void __exit test_exit(void)
     {
-            del_timer_sync(&test_timer);
+            timer_delete_sync(&test_timer);
     }
 
     module_init(test_init);