@@ -12,6 +12,72 @@ / {
compatible = "sony,pdx215-generic", "qcom,sm8350";
};
+&i2c13 {
+ pmic@75 {
+ compatible = "dlg,slg51000";
+ reg = <0x75>;
+ dlg,cs-gpios = <&pm8350b_gpios 1 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam_pwr_a_cs>;
+
+ regulators {
+ slg51000_a_ldo1: ldo1 {
+ regulator-name = "slg51000_a_ldo1";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ slg51000_a_ldo2: ldo2 {
+ regulator-name = "slg51000_a_ldo2";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ slg51000_a_ldo3: ldo3 {
+ regulator-name = "slg51000_a_ldo3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+
+ slg51000_a_ldo4: ldo4 {
+ regulator-name = "slg51000_a_ldo4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+
+ slg51000_a_ldo5: ldo5 {
+ regulator-name = "slg51000_a_ldo5";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ slg51000_a_ldo6: ldo6 {
+ regulator-name = "slg51000_a_ldo6";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ slg51000_a_ldo7: ldo7 {
+ regulator-name = "slg51000_a_ldo7";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ };
+ };
+ };
+};
+
+&pm8350b_gpios {
+ cam_pwr_a_cs: cam-pwr-a-cs-state {
+ pins = "gpio1";
+ function = "normal";
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ power-source = <1>;
+ drive-push-pull;
+ output-high;
+ };
+};
+
&tlmm {
gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
"APPS_I2C_0_SCL",
@@ -3,6 +3,7 @@
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
*/
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm8350.dtsi"
#include "pm8350.dtsi"
@@ -506,7 +507,6 @@ &i2c13 {
clock-frequency = <100000>;
/* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
- /* Dialog SLG51000 CMIC @ 75 */
};
&i2c15 {
Remove the mention of this PMIC from the common DTSI, as it's not used on PDX214. Add the required nodes to support it on PDX215. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- .../qcom/sm8350-sony-xperia-sagami-pdx215.dts | 66 +++++++++++++++++++ .../dts/qcom/sm8350-sony-xperia-sagami.dtsi | 2 +- 2 files changed, 67 insertions(+), 1 deletion(-)