| Message ID | Y3e2Q9jeGotRlwqV@google.com |
|---|---|
| State | Accepted |
| Commit | ca637c0ece144ce62ec8ef75dc127bcccd4f442a |
| Headers | show |
| Series | MIPS: DTS: CI20: fix reset line polarity of the ethernet controller | expand |
On Fri, Nov 18, 2022 at 08:43:47AM -0800, Dmitry Torokhov wrote: > The reset line is called PWRST#, annotated as "active low" in the > binding documentation, and is driven low and then high by the driver to > reset the chip. However in device tree for CI20 board it was incorrectly > marked as "active high". Fix it. > > Because (as far as I know) the ci20.dts is always built in the kernel I > elected not to also add a quirk to gpiolib to force the polarity there. > > Fixes: db49ca38579d ("net: davicom: dm9000: switch to using gpiod API") > Reported-by: Paul Cercueil <paul@crapouillou.net> > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > --- > arch/mips/boot/dts/ingenic/ci20.dts | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts > index 37c46720c719..f38c39572a9e 100644 > --- a/arch/mips/boot/dts/ingenic/ci20.dts > +++ b/arch/mips/boot/dts/ingenic/ci20.dts > @@ -438,7 +438,7 @@ dm9000@6 { > ingenic,nemc-tAW = <50>; > ingenic,nemc-tSTRV = <100>; > > - reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>; > vcc-supply = <ð0_power>; > > interrupt-parent = <&gpe>; > -- > 2.38.1.584.g0f3c55d4c2-goog applied to mips-next. Thomas.
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index 37c46720c719..f38c39572a9e 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -438,7 +438,7 @@ dm9000@6 { ingenic,nemc-tAW = <50>; ingenic,nemc-tSTRV = <100>; - reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>; vcc-supply = <ð0_power>; interrupt-parent = <&gpe>;
The reset line is called PWRST#, annotated as "active low" in the binding documentation, and is driven low and then high by the driver to reset the chip. However in device tree for CI20 board it was incorrectly marked as "active high". Fix it. Because (as far as I know) the ci20.dts is always built in the kernel I elected not to also add a quirk to gpiolib to force the polarity there. Fixes: db49ca38579d ("net: davicom: dm9000: switch to using gpiod API") Reported-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- arch/mips/boot/dts/ingenic/ci20.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)