@@ -580,6 +580,11 @@ static void option_instat_callback(struct urb *urb);
#define OPPO_VENDOR_ID 0x22d9
#define OPPO_PRODUCT_R11 0x276c
+/* These u-blox products use u-blox's vendor ID */
+#define UBLOX_VENDOR_ID 0x1546
+#define UBLOX_PRODUCT_LARA_L6 0x1341
+#define UBLOX_PRODUCT_LARA_L6_RMNET 0x1342
+#define UBLOX_PRODUCT_LARA_L6_ECM 0x1343
/* Device flags */
@@ -1127,6 +1132,12 @@ static const struct usb_device_id option_ids[] = {
.driver_info = RSVD(3) },
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x908b), /* u-blox LARA-R6 00B */
.driver_info = RSVD(4) },
+ /* u-blox products using u-blox vendor ID */
+ { USB_DEVICE(UBLOX_VENDOR_ID, UBLOX_PRODUCT_LARA_L6) },
+ { USB_DEVICE(UBLOX_VENDOR_ID, UBLOX_PRODUCT_LARA_L6_RMNET),
+ .driver_info = RSVD(4) },
+ { USB_DEVICE(UBLOX_VENDOR_ID, UBLOX_PRODUCT_LARA_L6_ECM),
+ .driver_info = RSVD(4) },
/* Quectel products using Quectel vendor ID */
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff),
.driver_info = NUMEP2 },
Add LARA-L6 PIDs for three different USB compositions. LARA-L6 module can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial interface and 1 CDC-ECM virtual network interface In default mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions In RmNet mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: RMNET interface In CDC-ECM mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: CDC-ECM interface Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> --- V5 -> V6: no changes. V4 -> V5: kept PID 0x90fa to maintain the support for other products which use VID:PID 0x05c6:0x90fa. Remove interface 4 from blacklist for LARA-L6 default mode since it is not needed. V3 -> V4: as requested, the patch has been split to 3 sub-patches. Fix comment format. V2 -> V3: added this section to tracking changes with previous versions. Added some explanations about the RSVD(4) in the description session. Added reservation to port 4 of VID:PID 0x05C6:0x908B to meet other companies QMI net interface implementation. V1 -> V2: define UBLOX_PRODUCT_LARA_R6 0x908b has been deleted together with the previosly provided definition of USB_DEVICE since the PID is used by another vendor. The LARA-L6 patch part is the same of the previosly provided one. drivers/usb/serial/option.c | 11 +++++++++++ 1 file changed, 11 insertions(+)