@@ -46,8 +46,8 @@ DEFINE_DEBUGFS_ATTRIBUTE(fops_implicit_txbf, mt7915_implicit_txbf_get,
/* test knob of system error recovery */
static ssize_t
-mt7915_fw_ser_set(struct file *file, const char __user *user_buf,
- size_t count, loff_t *ppos)
+mt7915_sys_recovery_set(struct file *file, const char __user *user_buf,
+ size_t count, loff_t *ppos)
{
struct mt7915_phy *phy = file->private_data;
struct mt7915_dev *dev = phy->dev;
@@ -71,8 +71,18 @@ mt7915_fw_ser_set(struct file *file, const char __user *user_buf,
return -EINVAL;
switch (val) {
+ /*
+ * 0: grab firmware current SER state.
+ * 1: trigger & enable system error L1 recovery.
+ * 2: trigger & enable system error L2 recovery.
+ * 3: trigger & enable system error L3 rx abort.
+ * 4: trigger & enable system error L3 tx abort
+ * 5: trigger & enable system error L3 tx disable.
+ * 6: trigger & enable system error L3 bf recovery.
+ * 7: trigger & enable system error full recovery.
+ * 8: trigger firmware crash.
+ */
case SER_QUERY:
- /* grab firmware SER stats */
ret = mt7915_mcu_set_ser(dev, 0, 0, ext_phy);
break;
case SER_SET_RECOVER_L1:
@@ -87,6 +97,23 @@ mt7915_fw_ser_set(struct file *file, const char __user *user_buf,
ret = mt7915_mcu_set_ser(dev, SER_RECOVER, val, ext_phy);
break;
+
+ /* enable full chip reset */
+ case SER_SET_RECOVER_FULL:
+ mt76_set(dev, MT_WFDMA0_MCU_HOST_INT_ENA, MT_MCU_CMD_WDT_MASK);
+ ret = mt7915_mcu_set_ser(dev, 1, 3, ext_phy);
+ if (ret)
+ return ret;
+
+ dev->recovery.state |= MT_MCU_CMD_WDT_MASK;
+ mt7915_reset(dev);
+ break;
+
+ /* WARNING: trigger firmware crash */
+ case SER_SET_SYSTEM_ASSERT:
+ mt76_wr(dev, MT_MCU_WM_CIRQ_EINT_MASK_CLR_ADDR, BIT(18));
+ mt76_wr(dev, MT_MCU_WM_CIRQ_EINT_SOFT_ADDR, BIT(18));
+ break;
default:
break;
}
@@ -95,20 +122,45 @@ mt7915_fw_ser_set(struct file *file, const char __user *user_buf,
}
static ssize_t
-mt7915_fw_ser_get(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
+mt7915_sys_recovery_get(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
{
struct mt7915_phy *phy = file->private_data;
struct mt7915_dev *dev = phy->dev;
char *buff;
int desc = 0;
ssize_t ret;
- static const size_t bufsz = 400;
+ static const size_t bufsz = 1024;
buff = kmalloc(bufsz, GFP_KERNEL);
if (!buff)
return -ENOMEM;
+ /* HELP */
+ desc += scnprintf(buff + desc, bufsz - desc,
+ "Please echo the correct value ...\n");
+ desc += scnprintf(buff + desc, bufsz - desc,
+ "0: grab firmware transient SER state\n");
+ desc += scnprintf(buff + desc, bufsz - desc,
+ "1: trigger system error L1 recovery\n");
+ desc += scnprintf(buff + desc, bufsz - desc,
+ "2: trigger system error L2 recovery\n");
+ desc += scnprintf(buff + desc, bufsz - desc,
+ "3: trigger system error L3 rx abort\n");
+ desc += scnprintf(buff + desc, bufsz - desc,
+ "4: trigger system error L3 tx abort\n");
+ desc += scnprintf(buff + desc, bufsz - desc,
+ "5: trigger system error L3 tx disable\n");
+ desc += scnprintf(buff + desc, bufsz - desc,
+ "6: trigger system error L3 bf recovery\n");
+ desc += scnprintf(buff + desc, bufsz - desc,
+ "7: trigger system error full recovery\n");
+ desc += scnprintf(buff + desc, bufsz - desc,
+ "8: trigger firmware crash\n");
+
+ /* SER statistics */
+ desc += scnprintf(buff + desc, bufsz - desc,
+ "\nlet's dump firmware SER statistics...\n");
desc += scnprintf(buff + desc, bufsz - desc,
"::E R , SER_STATUS = 0x%08x\n",
mt76_rr(dev, MT_SWDEF_SER_STATS));
@@ -139,15 +191,19 @@ mt7915_fw_ser_get(struct file *file, char __user *user_buf,
desc += scnprintf(buff + desc, bufsz - desc,
"::E R , SER_LMAC_WISR7_B1 = 0x%08x\n",
mt76_rr(dev, MT_SWDEF_LAMC_WISR7_BN1_STATS));
+ desc += scnprintf(buff + desc, bufsz - desc,
+ "\nSYS_RESET_COUNT: WM %d, WA %d\n",
+ dev->recovery.wm_reset_count,
+ dev->recovery.wa_reset_count);
ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
kfree(buff);
return ret;
}
-static const struct file_operations mt7915_fw_ser_ops = {
- .write = mt7915_fw_ser_set,
- .read = mt7915_fw_ser_get,
+static const struct file_operations mt7915_sys_recovery_ops = {
+ .write = mt7915_sys_recovery_set,
+ .read = mt7915_sys_recovery_get,
.open = simple_open,
.llseek = default_llseek,
};
@@ -598,10 +654,6 @@ mt7915_fw_util_wm_show(struct seq_file *file, void *data)
struct mt7915_dev *dev = file->private;
seq_printf(file, "Program counter: 0x%x\n", mt76_rr(dev, MT_WM_MCU_PC));
- seq_printf(file, "Exception state: 0x%x\n",
- is_mt7915(&dev->mt76) ?
- (u32)mt76_get_field(dev, MT_FW_EXCEPTION, GENMASK(15, 8)) :
- (u32)mt76_get_field(dev, MT_FW_EXCEPTION, GENMASK(7, 0)));
if (dev->fw.debug_wm) {
seq_printf(file, "Busy: %u%% Peak busy: %u%%\n",
@@ -1010,7 +1062,8 @@ int mt7915_init_debugfs(struct mt7915_phy *phy)
debugfs_create_file("xmit-queues", 0400, dir, phy,
&mt7915_xmit_queues_fops);
debugfs_create_file("tx_stats", 0400, dir, phy, &mt7915_tx_stats_fops);
- debugfs_create_file("fw_ser", 0600, dir, phy, &mt7915_fw_ser_ops);
+ debugfs_create_file("sys_recovery", 0600, dir, phy,
+ &mt7915_sys_recovery_ops);
debugfs_create_file("fw_debug_wm", 0600, dir, dev, &fops_fw_debug_wm);
debugfs_create_file("fw_debug_wa", 0600, dir, dev, &fops_fw_debug_wa);
debugfs_create_file("fw_debug_bin", 0600, dir, dev, &fops_fw_debug_bin);
@@ -1503,6 +1503,11 @@ void mt7915_mac_reset_work(struct work_struct *work)
mt76_clear(dev, MT_WFDMA0_MCU_HOST_INT_ENA,
MT_MCU_CMD_WDT_MASK);
+ if (READ_ONCE(dev->recovery.state) & MT_MCU_CMD_WA_WDT)
+ dev->recovery.wa_reset_count++;
+ else
+ dev->recovery.wm_reset_count++;
+
mt7915_mac_full_reset(dev);
/* enable mcu irq */
@@ -448,6 +448,8 @@ enum {
SER_SET_RECOVER_L3_TX_ABORT,
SER_SET_RECOVER_L3_TX_DISABLE,
SER_SET_RECOVER_L3_BF,
+ SER_SET_RECOVER_FULL,
+ SER_SET_SYSTEM_ASSERT,
/* action */
SER_ENABLE = 2,
SER_RECOVER
@@ -306,6 +306,8 @@ struct mt7915_dev {
struct {
u32 state;
+ u32 wa_reset_count;
+ u32 wm_reset_count;
bool hw_full_reset:1;
bool hw_init_done:1;
bool restart:1;
@@ -711,6 +711,8 @@ enum offs_rev {
#define MT_MCU_CMD_NORMAL_STATE BIT(5)
#define MT_MCU_CMD_ERROR_MASK GENMASK(5, 1)
+#define MT_MCU_CMD_WA_WDT BIT(31)
+#define MT_MCU_CMD_WM_WDT BIT(30)
#define MT_MCU_CMD_WDT_MASK GENMASK(31, 30)
/* TOP RGU */
@@ -1129,5 +1131,7 @@ enum offs_rev {
#define MT_MCU_WM_CIRQ(ofs) (MT_MCU_WM_CIRQ_BASE + (ofs))
#define MT_MCU_WM_CIRQ_IRQ_MASK_CLR_ADDR MT_MCU_WM_CIRQ(0x80)
#define MT_MCU_WM_CIRQ_IRQ_SOFT_ADDR MT_MCU_WM_CIRQ(0xc0)
+#define MT_MCU_WM_CIRQ_EINT_MASK_CLR_ADDR MT_MCU_WM_CIRQ(0x108)
+#define MT_MCU_WM_CIRQ_EINT_SOFT_ADDR MT_MCU_WM_CIRQ(0x118)
#endif
Trigger firmware crash and enable full system recovery through debugfs. This also renames knob "fw_ser" to a clear-cut name "sys_recovery". Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> --- change since v2 - print out the text for what the various values that can be written to this debugfs file do. --- .../wireless/mediatek/mt76/mt7915/debugfs.c | 81 +++++++++++++++---- .../net/wireless/mediatek/mt76/mt7915/mac.c | 5 ++ .../net/wireless/mediatek/mt76/mt7915/mcu.h | 2 + .../wireless/mediatek/mt76/mt7915/mt7915.h | 2 + .../net/wireless/mediatek/mt76/mt7915/regs.h | 4 + 5 files changed, 80 insertions(+), 14 deletions(-)