@@ -871,7 +871,8 @@ config GPIO_104_IDI_48
depends on PC104
select ISA_BUS_API
select GPIOLIB_IRQCHIP
- select GPIO_I8255
+ select REGMAP_IRQ
+ select GPIO_REGMAP
help
Enables GPIO support for the ACCES 104-IDI-48 family (104-IDI-48A,
104-IDI-48AC, 104-IDI-48B, 104-IDI-48BC). The base port addresses for
@@ -8,23 +8,18 @@
*/
#include <linux/bits.h>
#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/gpio/driver.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
+#include <linux/err.h>
+#include <linux/gpio/regmap.h>
#include <linux/interrupt.h>
-#include <linux/irqdesc.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
#include <linux/isa.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/spinlock.h>
+#include <linux/regmap.h>
#include <linux/types.h>
-#include "gpio-i8255.h"
-
-MODULE_IMPORT_NS(I8255);
-
#define IDI_48_EXTENT 8
#define MAX_NUM_IDI_48 max_num_isa_dev(IDI_48_EXTENT)
@@ -38,185 +33,82 @@ static unsigned int num_irq;
module_param_hw_array(irq, uint, irq, &num_irq, 0);
MODULE_PARM_DESC(irq, "ACCES 104-IDI-48 interrupt line numbers");
-/**
- * struct idi_48_reg - device register structure
- * @port0: Port 0 Inputs
- * @unused: Unused
- * @port1: Port 1 Inputs
- * @irq: Read: IRQ Status Register/IRQ Clear
- * Write: IRQ Enable/Disable
- */
-struct idi_48_reg {
- u8 port0[3];
- u8 unused;
- u8 port1[3];
- u8 irq;
-};
+#define IDI48_IRQ_REG 0x7
-/**
- * struct idi_48_gpio - GPIO device private data structure
- * @chip: instance of the gpio_chip
- * @lock: synchronization lock to prevent I/O race conditions
- * @irq_mask: input bits affected by interrupts
- * @reg: I/O address offset for the device registers
- * @cos_enb: Change-Of-State IRQ enable boundaries mask
- */
-struct idi_48_gpio {
- struct gpio_chip chip;
- spinlock_t lock;
- unsigned char irq_mask[6];
- struct idi_48_reg __iomem *reg;
- unsigned char cos_enb;
-};
-
-static int idi_48_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
+static int idi_48_reg_mask_xlate(struct gpio_regmap *gpio, unsigned int base,
+ unsigned int offset, unsigned int *reg,
+ unsigned int *mask)
{
- return GPIO_LINE_DIRECTION_IN;
-}
+ const unsigned int line = offset % 8;
+ const unsigned int stride = offset / 8;
+ const unsigned int port = (stride / 3) * 4;
+ const unsigned int port_stride = stride % 3;
-static int idi_48_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
-{
- return 0;
-}
-
-static int idi_48_gpio_get(struct gpio_chip *chip, unsigned int offset)
-{
- struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
- void __iomem *const ppi = idi48gpio->reg;
-
- return i8255_get(ppi, offset);
-}
-
-static int idi_48_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
- unsigned long *bits)
-{
- struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
- void __iomem *const ppi = idi48gpio->reg;
-
- i8255_get_multiple(ppi, mask, bits, chip->ngpio);
+ *reg = base + port + port_stride;
+ *mask = BIT(line);
return 0;
}
-static void idi_48_irq_ack(struct irq_data *data)
-{
-}
-
-static void idi_48_irq_mask(struct irq_data *data)
-{
- struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
- struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
- const unsigned int offset = irqd_to_hwirq(data);
- const unsigned long boundary = offset / 8;
- const unsigned long mask = BIT(offset % 8);
- unsigned long flags;
-
- spin_lock_irqsave(&idi48gpio->lock, flags);
-
- idi48gpio->irq_mask[boundary] &= ~mask;
- gpiochip_disable_irq(chip, offset);
-
- /* Exit early if there are still input lines with IRQ unmasked */
- if (idi48gpio->irq_mask[boundary])
- goto exit;
-
- idi48gpio->cos_enb &= ~BIT(boundary);
-
- iowrite8(idi48gpio->cos_enb, &idi48gpio->reg->irq);
-
-exit:
- spin_unlock_irqrestore(&idi48gpio->lock, flags);
-}
-
-static void idi_48_irq_unmask(struct irq_data *data)
-{
- struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
- struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
- const unsigned int offset = irqd_to_hwirq(data);
- const unsigned long boundary = offset / 8;
- const unsigned long mask = BIT(offset % 8);
- unsigned int prev_irq_mask;
- unsigned long flags;
-
- spin_lock_irqsave(&idi48gpio->lock, flags);
-
- prev_irq_mask = idi48gpio->irq_mask[boundary];
-
- gpiochip_enable_irq(chip, offset);
- idi48gpio->irq_mask[boundary] |= mask;
-
- /* Exit early if IRQ was already unmasked for this boundary */
- if (prev_irq_mask)
- goto exit;
-
- idi48gpio->cos_enb |= BIT(boundary);
-
- iowrite8(idi48gpio->cos_enb, &idi48gpio->reg->irq);
-
-exit:
- spin_unlock_irqrestore(&idi48gpio->lock, flags);
-}
-
-static int idi_48_irq_set_type(struct irq_data *data, unsigned int flow_type)
-{
- /* The only valid irq types are none and both-edges */
- if (flow_type != IRQ_TYPE_NONE &&
- (flow_type & IRQ_TYPE_EDGE_BOTH) != IRQ_TYPE_EDGE_BOTH)
- return -EINVAL;
-
- return 0;
-}
-
-static const struct irq_chip idi_48_irqchip = {
- .name = "104-idi-48",
- .irq_ack = idi_48_irq_ack,
- .irq_mask = idi_48_irq_mask,
- .irq_unmask = idi_48_irq_unmask,
- .irq_set_type = idi_48_irq_set_type,
- .flags = IRQCHIP_IMMUTABLE,
- GPIOCHIP_IRQ_RESOURCE_HELPERS,
+static const struct regmap_range idi_48_wr_ranges[] = {
+ regmap_reg_range(0x0, 0x6),
+};
+static const struct regmap_range idi_48_rd_ranges[] = {
+ regmap_reg_range(0x0, 0x2), regmap_reg_range(0x4, 0x7),
+};
+static const struct regmap_range idi_48_precious_ranges[] = {
+ regmap_reg_range(0x7, 0x7),
+};
+static const struct regmap_access_table idi_48_wr_table = {
+ .no_ranges = idi_48_wr_ranges,
+ .n_no_ranges = ARRAY_SIZE(idi_48_wr_ranges),
+};
+static const struct regmap_access_table idi_48_rd_table = {
+ .yes_ranges = idi_48_rd_ranges,
+ .n_yes_ranges = ARRAY_SIZE(idi_48_rd_ranges),
+};
+static const struct regmap_access_table idi_48_precious_table = {
+ .yes_ranges = idi_48_precious_ranges,
+ .n_yes_ranges = ARRAY_SIZE(idi_48_precious_ranges),
+};
+static const struct regmap_config idi48_regmap_config = {
+ .reg_bits = 8,
+ .reg_stride = 1,
+ .val_bits = 8,
+ .io_port = true,
+ .max_register = 0x6,
+ .wr_table = &idi_48_wr_table,
+ .rd_table = &idi_48_rd_table,
+ .precious_table = &idi_48_precious_table,
};
-
-static irqreturn_t idi_48_irq_handler(int irq, void *dev_id)
-{
- struct idi_48_gpio *const idi48gpio = dev_id;
- unsigned long cos_status;
- unsigned long boundary;
- unsigned long irq_mask;
- unsigned long bit_num;
- unsigned long gpio;
- struct gpio_chip *const chip = &idi48gpio->chip;
-
- spin_lock(&idi48gpio->lock);
-
- cos_status = ioread8(&idi48gpio->reg->irq);
-
- /* IRQ Status (bit 6) is active low (0 = IRQ generated by device) */
- if (cos_status & BIT(6)) {
- spin_unlock(&idi48gpio->lock);
- return IRQ_NONE;
- }
-
- /* Bit 0-5 indicate which Change-Of-State boundary triggered the IRQ */
- cos_status &= 0x3F;
-
- for_each_set_bit(boundary, &cos_status, 6) {
- irq_mask = idi48gpio->irq_mask[boundary];
-
- for_each_set_bit(bit_num, &irq_mask, 8) {
- gpio = bit_num + boundary * 8;
-
- generic_handle_domain_irq(chip->irq.domain,
- gpio);
- }
- }
-
- spin_unlock(&idi48gpio->lock);
-
- return IRQ_HANDLED;
-}
#define IDI48_NGPIO 48
+
+#define IDI48_REGMAP_IRQ(_id) \
+ [_id] = { \
+ .mask = BIT((_id) / 8), \
+ .type = { .types_supported = IRQ_TYPE_EDGE_BOTH, }, \
+ }
+
+static const struct regmap_irq idi48_regmap_irqs[IDI48_NGPIO] = {
+ IDI48_REGMAP_IRQ(0), IDI48_REGMAP_IRQ(1), IDI48_REGMAP_IRQ(2),
+ IDI48_REGMAP_IRQ(3), IDI48_REGMAP_IRQ(4), IDI48_REGMAP_IRQ(5),
+ IDI48_REGMAP_IRQ(6), IDI48_REGMAP_IRQ(7), IDI48_REGMAP_IRQ(8),
+ IDI48_REGMAP_IRQ(9), IDI48_REGMAP_IRQ(10), IDI48_REGMAP_IRQ(11),
+ IDI48_REGMAP_IRQ(12), IDI48_REGMAP_IRQ(13), IDI48_REGMAP_IRQ(14),
+ IDI48_REGMAP_IRQ(15), IDI48_REGMAP_IRQ(16), IDI48_REGMAP_IRQ(17),
+ IDI48_REGMAP_IRQ(18), IDI48_REGMAP_IRQ(19), IDI48_REGMAP_IRQ(20),
+ IDI48_REGMAP_IRQ(21), IDI48_REGMAP_IRQ(22), IDI48_REGMAP_IRQ(23),
+ IDI48_REGMAP_IRQ(24), IDI48_REGMAP_IRQ(25), IDI48_REGMAP_IRQ(26),
+ IDI48_REGMAP_IRQ(27), IDI48_REGMAP_IRQ(28), IDI48_REGMAP_IRQ(29),
+ IDI48_REGMAP_IRQ(30), IDI48_REGMAP_IRQ(31), IDI48_REGMAP_IRQ(32),
+ IDI48_REGMAP_IRQ(33), IDI48_REGMAP_IRQ(34), IDI48_REGMAP_IRQ(35),
+ IDI48_REGMAP_IRQ(36), IDI48_REGMAP_IRQ(37), IDI48_REGMAP_IRQ(38),
+ IDI48_REGMAP_IRQ(39), IDI48_REGMAP_IRQ(40), IDI48_REGMAP_IRQ(41),
+ IDI48_REGMAP_IRQ(42), IDI48_REGMAP_IRQ(43), IDI48_REGMAP_IRQ(44),
+ IDI48_REGMAP_IRQ(45), IDI48_REGMAP_IRQ(46), IDI48_REGMAP_IRQ(47),
+};
+
static const char *idi48_names[IDI48_NGPIO] = {
"Bit 0 A", "Bit 1 A", "Bit 2 A", "Bit 3 A", "Bit 4 A", "Bit 5 A",
"Bit 6 A", "Bit 7 A", "Bit 8 A", "Bit 9 A", "Bit 10 A", "Bit 11 A",
@@ -228,75 +120,58 @@ static const char *idi48_names[IDI48_NGPIO] = {
"Bit 18 B", "Bit 19 B", "Bit 20 B", "Bit 21 B", "Bit 22 B", "Bit 23 B"
};
-static int idi_48_irq_init_hw(struct gpio_chip *gc)
-{
- struct idi_48_gpio *const idi48gpio = gpiochip_get_data(gc);
-
- /* Disable IRQ by default */
- iowrite8(0, &idi48gpio->reg->irq);
- ioread8(&idi48gpio->reg->irq);
-
- return 0;
-}
-
static int idi_48_probe(struct device *dev, unsigned int id)
{
- struct idi_48_gpio *idi48gpio;
const char *const name = dev_name(dev);
- struct gpio_irq_chip *girq;
+ struct gpio_regmap_config config = {0};
+ void __iomem *regs;
+ struct regmap_irq_chip *chip;
+ struct regmap_irq_chip_data *chip_data;
int err;
- idi48gpio = devm_kzalloc(dev, sizeof(*idi48gpio), GFP_KERNEL);
- if (!idi48gpio)
- return -ENOMEM;
-
if (!devm_request_region(dev, base[id], IDI_48_EXTENT, name)) {
dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
base[id], base[id] + IDI_48_EXTENT);
return -EBUSY;
}
- idi48gpio->reg = devm_ioport_map(dev, base[id], IDI_48_EXTENT);
- if (!idi48gpio->reg)
+ regs = devm_ioport_map(dev, base[id], IDI_48_EXTENT);
+ if (!regs)
return -ENOMEM;
- idi48gpio->chip.label = name;
- idi48gpio->chip.parent = dev;
- idi48gpio->chip.owner = THIS_MODULE;
- idi48gpio->chip.base = -1;
- idi48gpio->chip.ngpio = IDI48_NGPIO;
- idi48gpio->chip.names = idi48_names;
- idi48gpio->chip.get_direction = idi_48_gpio_get_direction;
- idi48gpio->chip.direction_input = idi_48_gpio_direction_input;
- idi48gpio->chip.get = idi_48_gpio_get;
- idi48gpio->chip.get_multiple = idi_48_gpio_get_multiple;
+ config.regmap = devm_regmap_init_mmio(dev, regs, &idi48_regmap_config);
+ if (IS_ERR(config.regmap))
+ return PTR_ERR(config.regmap);
- girq = &idi48gpio->chip.irq;
- gpio_irq_chip_set_chip(girq, &idi_48_irqchip);
- /* This will let us handle the parent IRQ in the driver */
- girq->parent_handler = NULL;
- girq->num_parents = 0;
- girq->parents = NULL;
- girq->default_type = IRQ_TYPE_NONE;
- girq->handler = handle_edge_irq;
- girq->init_hw = idi_48_irq_init_hw;
+ chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
- spin_lock_init(&idi48gpio->lock);
+ chip->name = name;
+ chip->status_base = IDI48_IRQ_REG;
+ chip->unmask_base = IDI48_IRQ_REG;
+ chip->clear_on_unmask = true;
+ chip->num_regs = 1;
+ chip->irqs = idi48_regmap_irqs;
+ chip->num_irqs = ARRAY_SIZE(idi48_regmap_irqs);
+
+ err = devm_regmap_add_irq_chip(dev, config.regmap, irq[id], IRQF_SHARED,
+ 0, chip, &chip_data);
- err = devm_gpiochip_add_data(dev, &idi48gpio->chip, idi48gpio);
if (err) {
- dev_err(dev, "GPIO registering failed (%d)\n", err);
+ dev_err(dev, "IRQ registration failed (%d)\n", err);
return err;
}
- err = devm_request_irq(dev, irq[id], idi_48_irq_handler, IRQF_SHARED,
- name, idi48gpio);
- if (err) {
- dev_err(dev, "IRQ handler registering failed (%d)\n", err);
- return err;
- }
+ config.parent = dev;
+ config.ngpio = IDI48_NGPIO;
+ config.names = idi48_names;
+ config.reg_dat_base = GPIO_REGMAP_ADDR(0x0);
+ config.ngpio_per_reg = 8;
+ config.reg_mask_xlate = idi_48_reg_mask_xlate;
+ config.irq_domain = regmap_irq_get_domain(chip_data);
- return 0;
+ return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &config));
}
static struct isa_driver idi_48_driver = {
The regmap API supports IO port accessors so we can take advantage of regmap abstractions rather than handling access to the device registers directly in the driver. Despite the underlying interface being based on i8255, it is simpler to use the gpio_regmap API directly because the 104-IDI-48 device features only input signals. Therefore, the dependence on the i8255 GPIO library is removed in this patch. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> --- drivers/gpio/Kconfig | 3 +- drivers/gpio/gpio-104-idi-48.c | 329 ++++++++++----------------------- 2 files changed, 104 insertions(+), 228 deletions(-)