diff mbox series

[v2,11/11] arm64: dts: qcom: Add support for SONY Xperia X/X Compact

Message ID 20221111120156.48040-12-angelogioacchino.delregno@collabora.com
State Accepted
Commit ff7f6d34ca07f76f430e8c2cac80495076895a99
Headers show
Series MSM8956/76 and Sony Xperia X / X Compact support | expand

Commit Message

AngeloGioacchino Del Regno Nov. 11, 2022, 12:01 p.m. UTC
This adds support for the Sony Xperia Loire/SmartLoire platform
with a base configuration that is common across all of the
devices that are based on this project.

Also adds a base DT configuration for the Xperia X and Xperia
X Compact (respectively, Suzu and Kugo) which is valid for both
their RoW (single-sim), DSDS (dual-sim) and other regional
variants of these two smartphones, that makes us able to boot
to a UART console.

Please note that, currently, the APC0/1 (cluster 0/1) vregs
are set to a safe voltage in order to ensure boot stability
until a proper solution for CPU DVFS scaling lands.

Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Co-developed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |   2 +
 .../qcom/msm8956-sony-xperia-loire-kugo.dts   |  35 +++
 .../qcom/msm8956-sony-xperia-loire-suzu.dts   |  17 ++
 .../dts/qcom/msm8956-sony-xperia-loire.dtsi   | 282 ++++++++++++++++++
 4 files changed, 336 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi

Comments

Krzysztof Kozlowski Nov. 15, 2022, 4:46 p.m. UTC | #1
On 11/11/2022 13:01, AngeloGioacchino Del Regno wrote:
> This adds support for the Sony Xperia Loire/SmartLoire platform
> with a base configuration that is common across all of the
> devices that are based on this project.
> 
> Also adds a base DT configuration for the Xperia X and Xperia
> X Compact (respectively, Suzu and Kugo) which is valid for both
> their RoW (single-sim), DSDS (dual-sim) and other regional
> variants of these two smartphones, that makes us able to boot
> to a UART console.
> 
> Please note that, currently, the APC0/1 (cluster 0/1) vregs
> are set to a safe voltage in order to ensure boot stability
> until a proper solution for CPU DVFS scaling lands.
> 
> Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> Co-developed-by: Marijn Suijten <marijn.suijten@somainline.org>
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile             |   2 +
>  .../qcom/msm8956-sony-xperia-loire-kugo.dts   |  35 +++
>  .../qcom/msm8956-sony-xperia-loire-suzu.dts   |  17 ++
>  .../dts/qcom/msm8956-sony-xperia-loire.dtsi   | 282 ++++++++++++++++++


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d534888bcfe5..70ba5cb7d835 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -21,6 +21,8 @@  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-grandmax.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-serranove.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8956-sony-xperia-loire-kugo.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8956-sony-xperia-loire-suzu.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-10.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-msft-lumia-octagon-talkman.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
new file mode 100644
index 000000000000..3fb8e23e4330
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
@@ -0,0 +1,35 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8956-sony-xperia-loire.dtsi"
+
+/ {
+	model = "Sony Xperia X Compact";
+	compatible = "sony,kugo-row", "qcom,msm8956";
+	chassis-type = "handset";
+};
+
+&blsp2_i2c2 {
+	status = "okay";
+
+	/* FUSB301 USB-C Controller */
+};
+
+&blsp2_i2c4 {
+	status = "okay";
+
+	/* ST STMVL53L0 ToF @ 29 */
+	/* AMS TCS349 RGBCIR @ 72 */
+};
+
+&pm8950_l1 {
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1300000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts
new file mode 100644
index 000000000000..87d657f6806b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts
@@ -0,0 +1,17 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8956-sony-xperia-loire.dtsi"
+
+/ {
+	model = "Sony Xperia X";
+	compatible = "sony,suzu-row", "qcom,msm8956";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
new file mode 100644
index 000000000000..67baced639c9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
@@ -0,0 +1,282 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include "msm8956.dtsi"
+
+#include "pm8004.dtsi"
+#include "pm8950.dtsi"
+#include "pmi8950.dtsi"
+
+/ {
+	qcom,msm-id = <266 0x10001>; /* MSM8956 v1.1 */
+	qcom,board-id = <8 0>;
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		mmc2 = &sdhc_3; /* SDC3 SDIO card slot */
+		serial0 = &blsp2_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		cont-splash@83000000 {
+			reg = <0x0 0x83000000 0x0 0x2800000>;
+		};
+
+		ramoops@57f00000 {
+			compatible = "ramoops";
+			reg = <0 0x57f00000 0 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x20000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+		};
+	};
+
+	usbphy_1p2: regulator-usbphy-1p2 {
+		compatible = "regulator-fixed";
+		regulator-name = "usbphy-1p2";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vph_pwr>;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	/* Synaptics RMI4 @ 2c */
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&gcc {
+	vdd_gfx-supply = <&pm8004_s5>;
+};
+
+&otg {
+	status = "okay";
+};
+
+&pm8004_spmi_regulators {
+	vdd_s2-supply = <&vph_pwr>;
+	vdd_s5-supply = <&vph_pwr>;
+
+	/* Cluster 1 supply */
+	pm8004_s2: s2 {
+		/* regulator-min-microvolt = <500000>; */
+		/* Set .95V to prevent unstabilities until CPR for this SoC is done */
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-name = "vdd_apc1";
+		/* Set always on until the CPU PLL is done */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pm8004_s5: s5 {
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-enable-ramp-delay = <500>;
+		regulator-name = "vdd_gfx";
+		/* Hack this on until the gpu driver is ready for it */
+		regulator-always-on;
+	};
+};
+
+&pm8950_spmi_regulators {
+	vdd_s5-supply = <&vph_pwr>;
+
+	/* Cluster 0 supply */
+	pm8950_spmi_s5: s5 {
+		/* Set .95V to prevent unstabilities until CPR for this SoC is done */
+		/* regulator-min-microvolt = <790000>; */
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-name = "vdd_apc0";
+		/* Set always on until the CPU PLL is done */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&rpm_requests {
+	pm8950_regulators: regulators {
+		compatible = "qcom,rpm-pm8950-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_l1_l19-supply = <&pm8950_s3>;
+		vdd_l2_l23-supply = <&pm8950_s3>;
+		vdd_l3-supply = <&pm8950_s3>;
+		vdd_l5_l6_l7_l16-supply = <&pm8950_s4>;
+		vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+
+		pm8950_s1: s1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1162500>;
+		};
+
+		pm8950_s3: s3 {
+			regulator-min-microvolt = <1325000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-always-on;
+		};
+
+		pm8950_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8950_l1: l1 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8950_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8950_l3: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8950_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <290000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-system-load = <130000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l9: l9 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <2400000>;
+		};
+
+		pm8950_l10: l10 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8950_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <60000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <100000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8950_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8950_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8950_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l17: l17 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8950_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8950_l23: l23 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	/* Toshiba THGBMHG8C4LBAU7 (032G34) */
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&pm8950_l8>;
+	vqmmc-supply = <&pm8950_l5>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	bus-width = <4>;
+	cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8950_l11>;
+	vqmmc-supply = <&pm8950_l12>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>;
+};
+
+&usb_hs_phy {
+	vdd-supply = <&usbphy_1p2>;
+	vdda1p8-supply = <&pm8950_l7>;
+	vdda3p3-supply = <&pm8950_l13>;
+	status = "okay";
+};