| Message ID | 20221109025941.1594612-2-shinichiro.kawasaki@wdc.com |
|---|---|
| State | New |
| Headers | show |
| Series | scsi: sd: use READ/WRITE/SYNC (16) commands per ZBC | expand |
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c index bd15624c6322..4717a55dbf35 100644 --- a/drivers/scsi/sd_zbc.c +++ b/drivers/scsi/sd_zbc.c @@ -921,9 +921,11 @@ int sd_zbc_read_zones(struct scsi_disk *sdkp, u8 buf[SD_BUF_SIZE]) return 0; } - /* READ16/WRITE16 is mandatory for ZBC disks */ - sdkp->device->use_16_for_rw = 1; - sdkp->device->use_10_for_rw = 0; + /* READ16/WRITE16 is mandatory for host-managed devices */ + if (sdkp->device->type == TYPE_ZBC) { + sdkp->device->use_16_for_rw = 1; + sdkp->device->use_10_for_rw = 0; + } if (!blk_queue_is_zoned(q)) { /*
ZBC Zoned Block Commands specification mandates READ (16) and WRITE (16) commands only for host-managed zoned block devices. It does not mandate the commands for host-aware zoned block devices. However, current sd_zbc_read_zones() code assumes the commands were mandated for host- aware devices also and enforces the commands. If the host-aware drives do not support the commands, they may fail. To conform to the ZBC specification and to avoid the failure, check device type and modify use_16_for_rw and use_10_for_rw flags only for host-managed zoned block devices, so that the READ (16) and WRITE (16) commands are not enforced on host-aware zoned block devices. Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> --- drivers/scsi/sd_zbc.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)