| Message ID | Y2waf9O37lJiF8z1@arcor.de |
|---|---|
| State | New |
| Headers | show |
| Series | USB: serial: option: add Fibocom FM160 0x0111 composition | expand |
On Wed, Nov 09, 2022 at 10:24:15PM +0100, Reinhard Speyerer wrote: > Add support for the following Fibocom FM160 composition: > > 0x0111: MBIM + MODEM + DIAG + AT > > T: Bus=01 Lev=02 Prnt=125 Port=01 Cnt=02 Dev#= 93 Spd=480 MxCh= 0 > D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=2cb7 ProdID=0111 Rev= 5.04 > S: Manufacturer=Fibocom > S: Product=Fibocom FM160 Modem_SN:12345678 > S: SerialNumber=12345678 > C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA > A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 > I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim > E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms > I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim > I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim > E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > > Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Now applied, thanks! Johan
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 697683e3fbff..693dd0e94e6e 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2167,6 +2167,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x010a, 0xff) }, /* Fibocom MA510 (ECM mode) */ { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) }, /* Fibocom FG150 Diag */ { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) }, /* Fibocom FG150 AT */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0111, 0xff) }, /* Fibocom FM160 (MBIM mode) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff), /* Fibocom FM101-GL (laptop MBIM) */
Add support for the following Fibocom FM160 composition: 0x0111: MBIM + MODEM + DIAG + AT T: Bus=01 Lev=02 Prnt=125 Port=01 Cnt=02 Dev#= 93 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0111 Rev= 5.04 S: Manufacturer=Fibocom S: Product=Fibocom FM160 Modem_SN:12345678 S: SerialNumber=12345678 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> ---