@@ -42,7 +42,7 @@ ethernet@0 {
compatible = "micrel,ks8851";
reg = <0>;
interrupt-parent = <&msmgpio>;
- interrupts = <90 8>;
+ interrupts = <90 IRQ_TYPE_LEVEL_LOW>;
spi-max-frequency = <5400000>;
vdd-supply = <&ext_l2>;
vdd-io-supply = <&pm8921_lvs6>;
@@ -17,7 +17,7 @@ / {
cpus {
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <1 14 0x304>;
+ interrupts = <GIC_PPI 14 0x304>;
cpu@0 {
compatible = "qcom,krait";
@@ -52,7 +52,7 @@ memory {
cpu-pmu {
compatible = "qcom,krait-pmu";
- interrupts = <1 10 0x304>;
+ interrupts = <GIC_PPI 10 0x304>;
qcom,no-pc-write;
};
@@ -105,9 +105,9 @@ intc: interrupt-controller@2000000 {
timer@200a000 {
compatible = "qcom,kpss-timer",
"qcom,kpss-wdt-msm8960", "qcom,msm-timer";
- interrupts = <1 1 0x301>,
- <1 2 0x301>,
- <1 3 0x301>;
+ interrupts = <GIC_PPI 1 0x301>,
+ <GIC_PPI 2 0x301>,
+ <GIC_PPI 3 0x301>;
reg = <0x0200a000 0x100>;
clock-frequency = <27000000>,
<32768>;
@@ -119,7 +119,7 @@ msmgpio: pinctrl@800000 {
gpio-controller;
gpio-ranges = <&msmgpio 0 0 152>;
#gpio-cells = <2>;
- interrupts = <0 16 0x4>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x800000 0x4000>;
@@ -255,7 +255,7 @@ ssbi@500000 {
pmicintc: pmic {
compatible = "qcom,pm8921";
interrupt-parent = <&msmgpio>;
- interrupts = <104 8>;
+ interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
#interrupt-cells = <2>;
interrupt-controller;
#address-cells = <1>;
@@ -265,7 +265,8 @@ pwrkey@1c {
compatible = "qcom,pm8921-pwrkey";
reg = <0x1c>;
interrupt-parent = <&pmicintc>;
- interrupts = <50 1>, <51 1>;
+ interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+ <51 IRQ_TYPE_EDGE_RISING>;
debounce = <15625>;
pull-up;
};
@@ -274,7 +275,8 @@ keypad@148 {
compatible = "qcom,pm8921-keypad";
reg = <0x148>;
interrupt-parent = <&pmicintc>;
- interrupts = <74 1>, <75 1>;
+ interrupts = <74 IRQ_TYPE_EDGE_RISING>,
+ <75 IRQ_TYPE_EDGE_RISING>;
debounce = <15>;
scan-delay = <32>;
row-hold = <91500>;
@@ -283,7 +285,7 @@ keypad@148 {
rtc@11d {
compatible = "qcom,pm8921-rtc";
interrupt-parent = <&pmicintc>;
- interrupts = <39 1>;
+ interrupts = <39 IRQ_TYPE_EDGE_RISING>;
reg = <0x11d>;
allow-set-time;
};
Replace GIC_PPI, GIC_SPI and interrupt type numbers with appropriate defines. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm/boot/dts/qcom-msm8960-cdp.dts | 2 +- arch/arm/boot/dts/qcom-msm8960.dtsi | 22 ++++++++++++---------- 2 files changed, 13 insertions(+), 11 deletions(-)