| Message ID | 20221108142357.67202-1-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Accepted |
| Commit | a4c54f830da86294b8cd7137f686c6d8aa62417c |
| Headers | show |
| Series | [1/2] dt-bindings: pinctrl: qcom,ipq8074: convert to dtschema | expand |
On Tue, Nov 08, 2022 at 03:23:56PM +0100, Krzysztof Kozlowski wrote: > Convert Qualcomm IPQ8074 pin controller bindings to DT schema. Keep the > parsing of pin configuration subnodes consistent with other Qualcomm > schemas (children named with '-state' suffix, their children with > '-pins'). > Reviewed-by: Bjorn Andersson <andersson@kernel.org> Regards, Bjorn > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > .../bindings/pinctrl/qcom,ipq8074-pinctrl.txt | 181 ------------------ > .../pinctrl/qcom,ipq8074-pinctrl.yaml | 135 +++++++++++++ > 2 files changed, 135 insertions(+), 181 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt > deleted file mode 100644 > index 7b151894f5a0..000000000000 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt > +++ /dev/null > @@ -1,181 +0,0 @@ > -Qualcomm Technologies, Inc. IPQ8074 TLMM block > - > -This binding describes the Top Level Mode Multiplexer block found in the > -IPQ8074 platform. > - > -- compatible: > - Usage: required > - Value type: <string> > - Definition: must be "qcom,ipq8074-pinctrl" > - > -- reg: > - Usage: required > - Value type: <prop-encoded-array> > - Definition: the base address and size of the TLMM register space. > - > -- interrupts: > - Usage: required > - Value type: <prop-encoded-array> > - Definition: should specify the TLMM summary IRQ. > - > -- interrupt-controller: > - Usage: required > - Value type: <none> > - Definition: identifies this node as an interrupt controller > - > -- #interrupt-cells: > - Usage: required > - Value type: <u32> > - Definition: must be 2. Specifying the pin number and flags, as defined > - in <dt-bindings/interrupt-controller/irq.h> > - > -- gpio-controller: > - Usage: required > - Value type: <none> > - Definition: identifies this node as a gpio controller > - > -- #gpio-cells: > - Usage: required > - Value type: <u32> > - Definition: must be 2. Specifying the pin number and flags, as defined > - in <dt-bindings/gpio/gpio.h> > - > -- gpio-ranges: > - Usage: required > - Definition: see ../gpio/gpio.txt > - > -- gpio-reserved-ranges: > - Usage: optional > - Definition: see ../gpio/gpio.txt > - > -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for > -a general description of GPIO and interrupt bindings. > - > -Please refer to pinctrl-bindings.txt in this directory for details of the > -common pinctrl bindings used by client devices, including the meaning of the > -phrase "pin configuration node". > - > -The pin configuration nodes act as a container for an arbitrary number of > -subnodes. Each of these subnodes represents some desired configuration for a > -pin, a group, or a list of pins or groups. This configuration can include the > -mux function to select on those pin(s)/group(s), and various pin configuration > -parameters, such as pull-up, drive strength, etc. > - > - > -PIN CONFIGURATION NODES: > - > -The name of each subnode is not important; all subnodes should be enumerated > -and processed purely based on their content. > - > -Each subnode only affects those parameters that are explicitly listed. In > -other words, a subnode that lists a mux function but no pin configuration > -parameters implies no information about any pin configuration parameters. > -Similarly, a pin subnode that describes a pullup parameter implies no > -information about e.g. the mux function. > - > - > -The following generic properties as defined in pinctrl-bindings.txt are valid > -to specify in a pin configuration subnode: > - > -- pins: > - Usage: required > - Value type: <string-array> > - Definition: List of gpio pins affected by the properties specified in > - this subnode. Valid pins are: > - gpio0-gpio69 > - > -- function: > - Usage: required > - Value type: <string> > - Definition: Specify the alternative function to be configured for the > - specified pins. Functions are only valid for gpio pins. > - Valid values are: > - atest_char, atest_char0, atest_char1, atest_char2, > - atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync, > - audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, > - audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c, > - blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart, > - blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2, > - blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0, > - blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi, > - blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, > - cxc0, cxc1, dbg_out, gcc_plltest, gcc_tlmm, gpio, ldo_en, > - ldo_update, led0, led1, led2, mac0_sa0, mac0_sa1, mac1_sa0, > - mac1_sa1, mac1_sa2, mac1_sa3, mac2_sa0, mac2_sa1, mdc, > - mdio, pcie0_clk, pcie0_rst, pcie0_wake, pcie1_clk, > - pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx, pcm_fsync, > - pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0, pta1_1, > - pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3, > - qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, > - qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, > - qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, > - qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, > - qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, > - qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, > - qpic, rx0, rx1, rx2, sd_card, sd_write, tsens_max, wci2a, > - wci2b, wci2c, wci2d > - > -- bias-disable: > - Usage: optional > - Value type: <none> > - Definition: The specified pins should be configured as no pull. > - > -- bias-pull-down: > - Usage: optional > - Value type: <none> > - Definition: The specified pins should be configured as pull down. > - > -- bias-pull-up: > - Usage: optional > - Value type: <none> > - Definition: The specified pins should be configured as pull up. > - > -- output-high: > - Usage: optional > - Value type: <none> > - Definition: The specified pins are configured in output mode, driven > - high. > - > -- output-low: > - Usage: optional > - Value type: <none> > - Definition: The specified pins are configured in output mode, driven > - low. > - > -- drive-strength: > - Usage: optional > - Value type: <u32> > - Definition: Selects the drive strength for the specified pins, in mA. > - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 > - > -Example: > - > - tlmm: pinctrl@1000000 { > - compatible = "qcom,ipq8074-pinctrl"; > - reg = <0x1000000 0x300000>; > - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > - gpio-controller; > - #gpio-cells = <2>; > - gpio-ranges = <&tlmm 0 0 70>; > - interrupt-controller; > - #interrupt-cells = <2>; > - > - uart2: uart2-default { > - mux { > - pins = "gpio23", "gpio24"; > - function = "blsp4_uart1"; > - }; > - > - rx { > - pins = "gpio23"; > - drive-strength = <4>; > - bias-disable; > - }; > - > - tx { > - pins = "gpio24"; > - drive-strength = <2>; > - bias-pull-up; > - }; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml > new file mode 100644 > index 000000000000..c02dd2ad9b31 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml > @@ -0,0 +1,135 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq8074-pinctrl.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm IPQ8074 TLMM pin controller > + > +maintainers: > + - Bjorn Andersson <andersson@kernel.org> > + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > + > +description: > + Top Level Mode Multiplexer pin controller in Qualcomm IPQ8074 SoC. > + > +properties: > + compatible: > + const: qcom,ipq8074-pinctrl > + > + reg: > + maxItems: 1 > + > + interrupts: true > + interrupt-controller: true > + "#interrupt-cells": true > + gpio-controller: true > + "#gpio-cells": true > + gpio-ranges: true > + wakeup-parent: true > + > + gpio-reserved-ranges: > + minItems: 1 > + maxItems: 35 > + > + gpio-line-names: > + maxItems: 70 > + > +patternProperties: > + "-state$": > + oneOf: > + - $ref: "#/$defs/qcom-ipq8074-tlmm-state" > + - patternProperties: > + "-pins$": > + $ref: "#/$defs/qcom-ipq8074-tlmm-state" > + additionalProperties: false > + > +$defs: > + qcom-ipq8074-tlmm-state: > + type: object > + description: > + Pinctrl node's client devices use subnodes for desired pin configuration. > + Client device subnodes use below standard properties. > + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state > + > + properties: > + pins: > + description: > + List of gpio pins affected by the properties specified in this > + subnode. > + items: > + pattern: "^gpio([0-9]|[1-6][0-9]|70)$" > + minItems: 1 > + maxItems: 36 > + > + function: > + description: > + Specify the alternative function to be configured for the specified > + pins. > + > + enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2, > + atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync, > + audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, > + audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c, > + blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart, > + blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2, > + blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0, > + blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi, > + blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, cxc0, > + cxc1, dbg_out, gcc_plltest, gcc_tlmm, ldo_en, ldo_update, led0, > + led1, led2, mac0_sa0, mac0_sa1, mac1_sa0, mac1_sa1, mac1_sa2, > + mac1_sa3, mac2_sa0, mac2_sa1, mdc, mdio, pcie0_clk, pcie0_rst, > + pcie0_wake, pcie1_clk, pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx, > + pcm_fsync, pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0, > + pta1_1, pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3, > + qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, > + qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, > + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, > + qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b, > + qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, > + qdss_tracedata_b, qpic, rx0, rx1, rx2, sd_card, sd_write, > + tsens_max, wci2a, wci2b, wci2c, wci2d ] > + > + bias-pull-down: true > + bias-pull-up: true > + bias-disable: true > + drive-strength: true > + input-enable: true > + output-high: true > + output-low: true > + > + required: > + - pins > + > + additionalProperties: false > + > +allOf: > + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + tlmm: pinctrl@1000000 { > + compatible = "qcom,ipq8074-pinctrl"; > + reg = <0x01000000 0x300000>; > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + gpio-ranges = <&tlmm 0 0 70>; > + #gpio-cells = <0x2>; > + interrupt-controller; > + #interrupt-cells = <0x2>; > + > + serial4-state { > + pins = "gpio23", "gpio24"; > + function = "blsp4_uart1"; > + drive-strength = <8>; > + bias-disable; > + }; > + }; > -- > 2.34.1 >
On Tue, 8 Nov 2022 15:23:56 +0100, Krzysztof Kozlowski wrote: > Convert Qualcomm IPQ8074 pin controller bindings to DT schema. Keep the > parsing of pin configuration subnodes consistent with other Qualcomm > schemas (children named with '-state' suffix, their children with > '-pins'). > > Applied, thanks! [1/2] dt-bindings: pinctrl: qcom,ipq8074: convert to dtschema Best regards,
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt deleted file mode 100644 index 7b151894f5a0..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt +++ /dev/null @@ -1,181 +0,0 @@ -Qualcomm Technologies, Inc. IPQ8074 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -IPQ8074 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,ipq8074-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio0-gpio69 - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - atest_char, atest_char0, atest_char1, atest_char2, - atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync, - audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, - audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c, - blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart, - blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2, - blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0, - blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi, - blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, - cxc0, cxc1, dbg_out, gcc_plltest, gcc_tlmm, gpio, ldo_en, - ldo_update, led0, led1, led2, mac0_sa0, mac0_sa1, mac1_sa0, - mac1_sa1, mac1_sa2, mac1_sa3, mac2_sa0, mac2_sa1, mdc, - mdio, pcie0_clk, pcie0_rst, pcie0_wake, pcie1_clk, - pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx, pcm_fsync, - pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0, pta1_1, - pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3, - qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, - qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, - qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, - qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, - qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, - qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, - qpic, rx0, rx1, rx2, sd_card, sd_write, tsens_max, wci2a, - wci2b, wci2c, wci2d - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@1000000 { - compatible = "qcom,ipq8074-pinctrl"; - reg = <0x1000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 70>; - interrupt-controller; - #interrupt-cells = <2>; - - uart2: uart2-default { - mux { - pins = "gpio23", "gpio24"; - function = "blsp4_uart1"; - }; - - rx { - pins = "gpio23"; - drive-strength = <4>; - bias-disable; - }; - - tx { - pins = "gpio24"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml new file mode 100644 index 000000000000..c02dd2ad9b31 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq8074-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ8074 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm IPQ8074 SoC. + +properties: + compatible: + const: qcom,ipq8074-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 35 + + gpio-line-names: + maxItems: 70 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq8074-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq8074-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq8074-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|[1-6][0-9]|70)$" + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2, + atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync, + audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, + audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c, + blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart, + blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2, + blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0, + blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi, + blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, cxc0, + cxc1, dbg_out, gcc_plltest, gcc_tlmm, ldo_en, ldo_update, led0, + led1, led2, mac0_sa0, mac0_sa1, mac1_sa0, mac1_sa1, mac1_sa2, + mac1_sa3, mac2_sa0, mac2_sa1, mdc, mdio, pcie0_clk, pcie0_rst, + pcie0_wake, pcie1_clk, pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx, + pcm_fsync, pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0, + pta1_1, pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3, + qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, + qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, + qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b, + qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, + qdss_tracedata_b, qpic, rx0, rx1, rx2, sd_card, sd_write, + tsens_max, wci2a, wci2b, wci2c, wci2d ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq8074-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 70>; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x2>; + + serial4-state { + pins = "gpio23", "gpio24"; + function = "blsp4_uart1"; + drive-strength = <8>; + bias-disable; + }; + };
Convert Qualcomm IPQ8074 pin controller bindings to DT schema. Keep the parsing of pin configuration subnodes consistent with other Qualcomm schemas (children named with '-state' suffix, their children with '-pins'). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../bindings/pinctrl/qcom,ipq8074-pinctrl.txt | 181 ------------------ .../pinctrl/qcom,ipq8074-pinctrl.yaml | 135 +++++++++++++ 2 files changed, 135 insertions(+), 181 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml