@@ -839,7 +839,7 @@ ls_exp_gpio_f: pm8916-mpp4-state {
function = "digital";
output-low;
- power-source = <PM8916_MPP_L5>; // 1.8V
+ power-source = <PM8916_MPP_L5>; /* 1.8V */
};
pm8916_mpps_leds: pm8916-mpps-state {
@@ -1,5 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2021 Stephan Gerhold
+/*
+ * Copyright (C) 2021 Stephan Gerhold
+ */
/dts-v1/;
@@ -22,7 +22,7 @@ chosen {
};
reserved-memory {
- // wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000
+ /* wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 */
/delete-node/ wcnss@89300000;
wcnss_mem: wcnss@8b600000 {
@@ -204,12 +204,12 @@ rmi4@20 {
rmi4-f01@1 {
reg = <0x1>;
- syna,nosleep-mode = <1>; // Allow sleeping
+ syna,nosleep-mode = <1>; /* Allow sleeping */
};
rmi4-f12@12 {
reg = <0x12>;
- syna,sensor-type = <1>; // Touchscreen
+ syna,sensor-type = <1>; /* Touchscreen */
};
};
};
@@ -6,7 +6,7 @@
&msmgpio {
blsp1_uart1_default: blsp1-uart1-default {
- // TX, RX, CTS_N, RTS_N
+ /* TX, RX, CTS_N, RTS_N */
pins = "gpio0", "gpio1", "gpio2", "gpio3";
function = "blsp_uart1";
@@ -1,5 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2019 Stephan Gerhold
+/*
+ * Copyright (C) 2019 Stephan Gerhold
+ */
/dts-v1/;
@@ -1,5 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2020 Stephan Gerhold
+/*
+ * Copyright (C) 2020 Stephan Gerhold
+ */
/dts-v1/;
@@ -1263,21 +1263,21 @@ apps_iommu: iommu@1ef0000 {
clock-names = "iface", "bus";
qcom,iommu-secure-id = <17>;
- // vfe:
+ /* VFE */
iommu-ctx@3000 {
compatible = "qcom,msm-iommu-v1-sec";
reg = <0x3000 0x1000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
};
- // mdp_0:
+ /* MDP_0 */
iommu-ctx@4000 {
compatible = "qcom,msm-iommu-v1-ns";
reg = <0x4000 0x1000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
};
- // venus_ns:
+ /* VENUS_NS */
iommu-ctx@5000 {
compatible = "qcom,msm-iommu-v1-sec";
reg = <0x5000 0x1000>;
@@ -1296,14 +1296,14 @@ gpu_iommu: iommu@1f08000 {
clock-names = "iface", "bus";
qcom,iommu-secure-id = <18>;
- // gfx3d_user:
+ /* GFX3D_USER */
iommu-ctx@1000 {
compatible = "qcom,msm-iommu-v1-ns";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
};
- // gfx3d_priv:
+ /* GFX3D_PRIV */
iommu-ctx@2000 {
compatible = "qcom,msm-iommu-v1-ns";
reg = <0x2000 0x1000>;
Switch '//' comments to C-style /* */ and fix up the contents of some. Make sure all multiline C-style commends begin with just '/*' with the comment text starting on a new line. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 2 +- arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 4 +++- arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts | 6 +++--- arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts | 4 +++- arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts | 4 +++- arch/arm64/boot/dts/qcom/msm8916.dtsi | 10 +++++----- 7 files changed, 19 insertions(+), 13 deletions(-)