@@ -10,10 +10,9 @@
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include <linux/regulator/consumer.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/err.h>
#include <linux/slab.h>
-#include <linux/of_gpio.h>
#include <video/omapfb_dss.h>
@@ -58,7 +57,7 @@ struct panel_drv_data {
struct spi_device *spi;
struct regulator *vcc_reg;
- int nreset_gpio;
+ struct gpio_desc *reset_gpio;
u16 gamma[12];
u32 mode;
u32 hmirror:1;
@@ -296,8 +295,7 @@ static int tpo_td043_power_on(struct panel_drv_data *ddata)
/* wait for panel to stabilize */
msleep(160);
- if (gpio_is_valid(ddata->nreset_gpio))
- gpio_set_value(ddata->nreset_gpio, 1);
+ gpiod_set_value_cansleep(ddata->reset_gpio, 0);
tpo_td043_write(ddata->spi, 2,
TPO_R02_MODE(ddata->mode) | TPO_R02_NCLK_RISING);
@@ -320,8 +318,7 @@ static void tpo_td043_power_off(struct panel_drv_data *ddata)
tpo_td043_write(ddata->spi, 3,
TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
- if (gpio_is_valid(ddata->nreset_gpio))
- gpio_set_value(ddata->nreset_gpio, 0);
+ gpiod_set_value_cansleep(ddata->reset_gpio, 1);
/* wait for at least 2 vsyncs before cutting off power */
msleep(50);
@@ -454,32 +451,6 @@ static struct omap_dss_driver tpo_td043_ops = {
.get_resolution = omapdss_default_get_resolution,
};
-
-static int tpo_td043_probe_of(struct spi_device *spi)
-{
- struct device_node *node = spi->dev.of_node;
- struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
- struct omap_dss_device *in;
- int gpio;
-
- gpio = of_get_named_gpio(node, "reset-gpios", 0);
- if (!gpio_is_valid(gpio)) {
- dev_err(&spi->dev, "failed to parse enable gpio\n");
- return gpio;
- }
- ddata->nreset_gpio = gpio;
-
- in = omapdss_of_find_source_for_first_ep(node);
- if (IS_ERR(in)) {
- dev_err(&spi->dev, "failed to find video source\n");
- return PTR_ERR(in);
- }
-
- ddata->in = in;
-
- return 0;
-}
-
static int tpo_td043_probe(struct spi_device *spi)
{
struct panel_drv_data *ddata;
@@ -508,9 +479,12 @@ static int tpo_td043_probe(struct spi_device *spi)
ddata->spi = spi;
- r = tpo_td043_probe_of(spi);
- if (r)
+ ddata->in = omapdss_of_find_source_for_first_ep(spi->dev.of_node);
+ r = PTR_ERR_OR_ZERO(ddata->in);
+ if (r) {
+ dev_err(&spi->dev, "failed to find video source: %d\n", r);
return r;
+ }
ddata->mode = TPO_R02_MODE_800x480;
memcpy(ddata->gamma, tpo_td043_def_gamma, sizeof(ddata->gamma));
@@ -521,16 +495,15 @@ static int tpo_td043_probe(struct spi_device *spi)
goto err_regulator;
}
- if (gpio_is_valid(ddata->nreset_gpio)) {
- r = devm_gpio_request_one(&spi->dev,
- ddata->nreset_gpio, GPIOF_OUT_INIT_LOW,
- "lcd reset");
- if (r < 0) {
- dev_err(&spi->dev, "couldn't request reset GPIO\n");
- goto err_gpio_req;
- }
+ ddata->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_HIGH);
+ r = PTR_ERR_OR_ZERO(ddata->reset_gpio);
+ if (r) {
+ dev_err(&spi->dev, "couldn't request reset GPIO\n");
+ goto err_gpio_req;
}
+ gpiod_set_consumer_name(ddata->reset_gpio, "lcd reset");
+
r = sysfs_create_group(&spi->dev.kobj, &tpo_td043_attr_group);
if (r) {
dev_err(&spi->dev, "failed to create sysfs files\n");
Switch the driver from legacy gpio API that is deprecated to the newer gpiod API that respects line polarities described in ACPI/DT. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- .../omap2/omapfb/displays/panel-tpo-td043mtea1.c | 59 ++++++---------------- 1 file changed, 16 insertions(+), 43 deletions(-)