diff mbox series

[net-next] powerpc: dts: t208x: Disable 10G on MAC1 and MAC2

Message ID 20221103212854.2334393-1-sean.anderson@seco.com
State New
Headers show
Series [net-next] powerpc: dts: t208x: Disable 10G on MAC1 and MAC2 | expand

Commit Message

Sean Anderson Nov. 3, 2022, 9:28 p.m. UTC 
There aren't enough resources to run these ports at 10G speeds. Just
keep the pcs changes, and revert the rest. This is not really correct,
since the hardware could support 10g in some other configuration...

Fixes: 36926a7d70c2 ("powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G")
Reported-by: Camelia Alexandra Groza <camelia.groza@nxp.com>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---

 .../boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi     | 45 -------------------
 .../boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi     | 45 -------------------
 arch/powerpc/boot/dts/fsl/t2081si-post.dtsi   |  6 ++-
 3 files changed, 4 insertions(+), 92 deletions(-)
 delete mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
 delete mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
diff mbox series

Patch

diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
deleted file mode 100644
index 6b3609574b0f..000000000000
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@ 
-// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
-/*
- * QorIQ FMan v3 10g port #2 device tree stub [ controller @ offset 0x400000 ]
- *
- * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
- * Copyright 2012 - 2015 Freescale Semiconductor Inc.
- */
-
-fman@400000 {
-	fman0_rx_0x08: port@88000 {
-		cell-index = <0x8>;
-		compatible = "fsl,fman-v3-port-rx";
-		reg = <0x88000 0x1000>;
-		fsl,fman-10g-port;
-	};
-
-	fman0_tx_0x28: port@a8000 {
-		cell-index = <0x28>;
-		compatible = "fsl,fman-v3-port-tx";
-		reg = <0xa8000 0x1000>;
-		fsl,fman-10g-port;
-	};
-
-	ethernet@e0000 {
-		cell-index = <0>;
-		compatible = "fsl,fman-memac";
-		reg = <0xe0000 0x1000>;
-		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
-		ptp-timer = <&ptp_timer0>;
-		pcsphy-handle = <&pcsphy0>, <&pcsphy0>;
-		pcs-handle-names = "sgmii", "xfi";
-	};
-
-	mdio@e1000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
-		reg = <0xe1000 0x1000>;
-		fsl,erratum-a011043; /* must ignore read errors */
-
-		pcsphy0: ethernet-phy@0 {
-			reg = <0x0>;
-		};
-	};
-};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
deleted file mode 100644
index 28ed1a85a436..000000000000
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@ 
-// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
-/*
- * QorIQ FMan v3 10g port #3 device tree stub [ controller @ offset 0x400000 ]
- *
- * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
- * Copyright 2012 - 2015 Freescale Semiconductor Inc.
- */
-
-fman@400000 {
-	fman0_rx_0x09: port@89000 {
-		cell-index = <0x9>;
-		compatible = "fsl,fman-v3-port-rx";
-		reg = <0x89000 0x1000>;
-		fsl,fman-10g-port;
-	};
-
-	fman0_tx_0x29: port@a9000 {
-		cell-index = <0x29>;
-		compatible = "fsl,fman-v3-port-tx";
-		reg = <0xa9000 0x1000>;
-		fsl,fman-10g-port;
-	};
-
-	ethernet@e2000 {
-		cell-index = <1>;
-		compatible = "fsl,fman-memac";
-		reg = <0xe2000 0x1000>;
-		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
-		ptp-timer = <&ptp_timer0>;
-		pcsphy-handle = <&pcsphy1>, <&pcsphy1>;
-		pcs-handle-names = "sgmii", "xfi";
-	};
-
-	mdio@e3000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
-		reg = <0xe3000 0x1000>;
-		fsl,erratum-a011043; /* must ignore read errors */
-
-		pcsphy1: ethernet-phy@0 {
-			reg = <0x0>;
-		};
-	};
-};
diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
index 74e17e134387..fed3879fa0aa 100644
--- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
@@ -609,8 +609,8 @@  usb1: usb@211000 {
 /include/ "qoriq-bman1.dtsi"
 
 /include/ "qoriq-fman3-0.dtsi"
-/include/ "qoriq-fman3-0-10g-2.dtsi"
-/include/ "qoriq-fman3-0-10g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
 /include/ "qoriq-fman3-0-1g-2.dtsi"
 /include/ "qoriq-fman3-0-1g-3.dtsi"
 /include/ "qoriq-fman3-0-1g-4.dtsi"
@@ -619,9 +619,11 @@  usb1: usb@211000 {
 /include/ "qoriq-fman3-0-10g-1.dtsi"
 	fman@400000 {
 		enet0: ethernet@e0000 {
+			pcs-handle-names = "sgmii", "xfi";
 		};
 
 		enet1: ethernet@e2000 {
+			pcs-handle-names = "sgmii", "xfi";
 		};
 
 		enet2: ethernet@e4000 {