[v5,6/8] arm64: dts: qcom: sm6115: Add basic soc dtsi

Add support for Qualcomm SM6115 SoC. This includes:
- GCC
- Pinctrl
- RPM (CC+PD)
- USB
- MMC
- UFS

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 854 +++++++++++++++++++++++++++
 1 file changed, 854 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm6115.dtsi

On 30.10.2022 10:42, Iskren Chernev wrote:
> Add support for Qualcomm SM6115 SoC. This includes:
> - GCC
> - Pinctrl
> - RPM (CC+PD)
> - USB
> - MMC
> - UFS
> 
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 854 +++++++++++++++++++++++++++
>  1 file changed, 854 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sm6115.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> new file mode 100644
> index 000000000000..0340ed21be05
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -0,0 +1,854 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
> + */
> +
> +#include <dt-bindings/clock/qcom,gcc-sm6115.h>
> +#include <dt-bindings/clock/qcom,rpmcc.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +
> +/ {
> +	interrupt-parent = <&intc>;
> +
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	chosen { };
> +
> +	clocks {
> +		xo_board: xo-board {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +		};
> +
> +		sleep_clk: sleep-clk {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +		};
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		CPU0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo260";
> +			reg = <0x0 0x0>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <100>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +			L2_0: l2-cache {
> +				compatible = "cache";
> +				cache-level = <2>;
> +			};
> +		};
> +
> +		CPU1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo260";
> +			reg = <0x0 0x1>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <100>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		CPU2: cpu@2 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo260";
> +			reg = <0x0 0x2>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <100>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		CPU3: cpu@3 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo260";
> +			reg = <0x0 0x3>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <100>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		CPU4: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo260";
> +			reg = <0x0 0x100>;
> +			enable-method = "psci";
> +			capacity-dmips-mhz = <1638>;
> +			dynamic-power-coefficient = <282>;
> +			next-level-cache = <&L2_1>;
> +			L2_1: l2-cache {
> +				compatible = "cache";
> +				cache-level = <2>;
> +			};
> +		};
> +
> +		CPU5: cpu@101 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo260";
> +			reg = <0x0 0x101>;
> +			capacity-dmips-mhz = <1638>;
> +			dynamic-power-coefficient = <282>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_1>;
> +		};
> +
> +		CPU6: cpu@102 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo260";
> +			reg = <0x0 0x102>;
> +			capacity-dmips-mhz = <1638>;
> +			dynamic-power-coefficient = <282>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_1>;
> +		};
> +
> +		CPU7: cpu@103 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo260";
> +			reg = <0x0 0x103>;
> +			capacity-dmips-mhz = <1638>;
> +			dynamic-power-coefficient = <282>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_1>;
> +		};
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&CPU0>;
> +				};
> +
> +				core1 {
> +					cpu = <&CPU1>;
> +				};
> +
> +				core2 {
> +					cpu = <&CPU2>;
> +				};
> +
> +				core3 {
> +					cpu = <&CPU3>;
> +				};
> +			};
> +
> +			cluster1 {
> +				core0 {
> +					cpu = <&CPU4>;
> +				};
> +
> +				core1 {
> +					cpu = <&CPU5>;
> +				};
> +
> +				core2 {
> +					cpu = <&CPU6>;
> +				};
> +
> +				core3 {
> +					cpu = <&CPU7>;
> +				};
> +			};
> +		};
> +	};
> +
> +	firmware {
> +		scm: scm {
> +			compatible = "qcom,scm-sm6115", "qcom,scm";
> +			#reset-cells = <1>;
> +		};
> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		/* We expect the bootloader to fill in the size */
> +		reg = <0 0x80000000 0 0>;
> +	};
> +
> +	pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	reserved_memory: reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		hyp_mem: memory@45700000 {
> +			reg = <0x0 0x45700000 0x0 0x600000>;
> +			no-map;
> +		};
> +
> +		xbl_aop_mem: memory@45e00000 {
> +			reg = <0x0 0x45e00000 0x0 0x140000>;
> +			no-map;
> +		};
> +
> +		sec_apps_mem: memory@45fff000 {
> +			reg = <0x0 0x45fff000 0x0 0x1000>;
> +			no-map;
> +		};
> +
> +		smem_mem: memory@46000000 {
> +			compatible = "qcom,smem";
> +			reg = <0x0 0x46000000 0x0 0x200000>;
> +			no-map;
> +
> +			hwlocks = <&tcsr_mutex 3>;
> +			qcom,rpm-msg-ram = <&rpm_msg_ram>;
> +		};
> +
> +		cdsp_sec_mem: memory@46200000 {
> +			reg = <0x0 0x46200000 0x0 0x1e00000>;
> +			no-map;
> +		};
> +
> +		pil_modem_mem: memory@4ab00000 {
> +			reg = <0x0 0x4ab00000 0x0 0x6900000>;
> +			no-map;
> +		};
> +
> +		pil_video_mem: memory@51400000 {
> +			reg = <0x0 0x51400000 0x0 0x500000>;
> +			no-map;
> +		};
> +
> +		wlan_msa_mem: memory@51900000 {
> +			reg = <0x0 0x51900000 0x0 0x100000>;
> +			no-map;
> +		};
> +
> +		pil_cdsp_mem: memory@51a00000 {
> +			reg = <0x0 0x51a00000 0x0 0x1e00000>;
> +			no-map;
> +		};
> +
> +		pil_adsp_mem: memory@53800000 {
> +			reg = <0x0 0x53800000 0x0 0x2800000>;
> +			no-map;
> +		};
> +
> +		pil_ipa_fw_mem: memory@56100000 {
> +			reg = <0x0 0x56100000 0x0 0x10000>;
> +			no-map;
> +		};
> +
> +		pil_ipa_gsi_mem: memory@56110000 {
> +			reg = <0x0 0x56110000 0x0 0x5000>;
> +			no-map;
> +		};
> +
> +		pil_gpu_mem: memory@56115000 {
> +			reg = <0x0 0x56115000 0x0 0x2000>;
> +			no-map;
> +		};
> +
> +		cont_splash_memory: memory@5c000000 {
> +			reg = <0x0 0x5c000000 0x0 0x00f00000>;
> +			no-map;
> +		};
> +
> +		dfps_data_memory: memory@5cf00000 {
> +			reg = <0x0 0x5cf00000 0x0 0x0100000>;
> +			no-map;
> +		};
> +
> +		removed_mem: memory@60000000 {
> +			reg = <0x0 0x60000000 0x0 0x3900000>;
> +			no-map;
> +		};
> +	};
> +
> +	rpm-glink {
> +		compatible = "qcom,glink-rpm";
> +
> +		interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
> +		qcom,rpm-msg-ram = <&rpm_msg_ram>;
> +		mboxes = <&apcs_glb 0>;
> +
> +		rpm_requests: rpm-requests {
> +			compatible = "qcom,rpm-sm6115";
> +			qcom,glink-channels = "rpm_requests";
> +
> +			rpmcc: clock-controller {
> +				compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc";
> +				#clock-cells = <1>;
> +			};
> +
> +			rpmpd: power-controller {
> +				compatible = "qcom,sm6115-rpmpd";
> +				#power-domain-cells = <1>;
> +				operating-points-v2 = <&rpmpd_opp_table>;
> +
> +				rpmpd_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					rpmpd_opp_min_svs: opp1 {
> +						opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
> +					};
> +
> +					rpmpd_opp_low_svs: opp2 {
> +						opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
> +					};
> +
> +					rpmpd_opp_svs: opp3 {
> +						opp-level = <RPM_SMD_LEVEL_SVS>;
> +					};
> +
> +					rpmpd_opp_svs_plus: opp4 {
> +						opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
> +					};
> +
> +					rpmpd_opp_nom: opp5 {
> +						opp-level = <RPM_SMD_LEVEL_NOM>;
> +					};
> +
> +					rpmpd_opp_nom_plus: opp6 {
> +						opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
> +					};
> +
> +					rpmpd_opp_turbo: opp7 {
> +						opp-level = <RPM_SMD_LEVEL_TURBO>;
> +					};
> +
> +					rpmpd_opp_turbo_plus: opp8 {
> +						opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
> +					};
> +				};
> +			};
> +		};
> +	};
> +
> +	soc: soc@0 {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0 0xffffffff>;
> +
> +		tcsr_mutex: hwlock@340000 {
> +			compatible = "qcom,tcsr-mutex";
> +			reg = <0x00340000 0x20000>;
> +			#hwlock-cells = <1>;
> +		};
> +
> +		tlmm: pinctrl@500000 {
> +			compatible = "qcom,sm6115-tlmm";
> +			reg = <0x00500000 0x400000>, <0x00900000 0x400000>, <0x00d00000 0x400000>;
> +			reg-names = "west", "south", "east";
> +			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			gpio-ranges = <&tlmm 0 0 121>;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			sdc1_state_on: sdc1-on-state {
> +				clk-pins {
> +					pins = "sdc1_clk";
> +					bias-disable;
> +					drive-strength = <16>;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc1_cmd";
> +					bias-pull-up;
> +					drive-strength = <10>;
> +				};
> +
> +				data-pins {
> +					pins = "sdc1_data";
> +					bias-pull-up;
> +					drive-strength = <10>;
> +				};
> +
> +				rclk-pins {
> +					pins = "sdc1_rclk";
> +					bias-pull-down;
> +				};
> +			};
> +
> +			sdc1_state_off: sdc1-off-state {
> +				clk-pins {
> +					pins = "sdc1_clk";
> +					bias-disable;
> +					drive-strength = <2>;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc1_cmd";
> +					bias-pull-up;
> +					drive-strength = <2>;
> +				};
> +
> +				data-pins {
> +					pins = "sdc1_data";
> +					bias-pull-up;
> +					drive-strength = <2>;
> +				};
> +
> +				rclk-pins {
> +					pins = "sdc1_rclk";
> +					bias-pull-down;
> +				};
> +			};
> +
> +			sdc2_state_on: sdc2-on-state {
> +				clk-pins {
> +					pins = "sdc2_clk";
> +					bias-disable;
> +					drive-strength = <16>;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc2_cmd";
> +					bias-pull-up;
> +					drive-strength = <10>;
> +				};
> +
> +				data-pins {
> +					pins = "sdc2_data";
> +					bias-pull-up;
> +					drive-strength = <10>;
> +				};
> +
> +				sd-cd-pins {
> +					pins = "gpio88";
> +					function = "gpio";
> +					bias-pull-up;
> +					drive-strength = <2>;
> +				};
> +			};
> +
> +			sdc2_state_off: sdc2-off-state {
> +				clk-pins {
> +					pins = "sdc2_clk";
> +					bias-disable;
> +					drive-strength = <2>;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc2_cmd";
> +					bias-pull-up;
> +					drive-strength = <2>;
> +				};
> +
> +				data-pins {
> +					pins = "sdc2_data";
> +					bias-pull-up;
> +					drive-strength = <2>;
> +				};
> +
> +				sd-cd-pins {
> +					pins = "gpio88";
> +					function = "gpio";
> +					bias-disable;
> +					drive-strength = <2>;
> +				};
> +			};
> +		};
> +
> +		gcc: clock-controller@1400000 {
> +			compatible = "qcom,gcc-sm6115";
> +			reg = <0x01400000 0x1f0000>;
> +			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
> +			clock-names = "bi_tcxo", "sleep_clk";
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +		};
> +
> +		usb_1_hsphy: phy@1613000 {
> +			compatible = "qcom,sm6115-qusb2-phy";
> +			reg = <0x01613000 0x180>;
> +			#phy-cells = <0>;
> +
> +			clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
> +			clock-names = "cfg_ahb", "ref";
> +
> +			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> +			nvmem-cells = <&qusb2_hstx_trim>;
> +
> +			status = "disabled";
> +		};
> +
> +		qfprom@1b40000 {
> +			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
> +			reg = <0x01b40000 0x7000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			qusb2_hstx_trim: hstx-trim@25b {
> +				reg = <0x25b 0x1>;
> +				bits = <1 4>;
> +			};
> +		};
> +
> +		spmi_bus: spmi@1c40000 {
> +			compatible = "qcom,spmi-pmic-arb";
> +			reg = <0x01c40000 0x1100>,
> +			      <0x01e00000 0x2000000>,
> +			      <0x03e00000 0x100000>,
> +			      <0x03f00000 0xa0000>,
> +			      <0x01c0a000 0x26000>;
> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> +			interrupt-names = "periph_irq";
> +			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> +			qcom,ee = <0>;
> +			qcom,channel = <0>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
> +			interrupt-controller;
> +			#interrupt-cells = <4>;
> +		};
> +
> +		rpm_msg_ram: sram@45f0000 {
> +			compatible = "qcom,rpm-msg-ram";
> +			reg = <0x045f0000 0x7000>;
> +		};
> +
> +		sdhc_1: mmc@4744000 {
> +			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
> +			reg = <0x04744000 0x1000>, <0x04745000 0x1000>, <0x04748000 0x8000>;
> +			reg-names = "hc", "cqhci", "ice";
> +
> +			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hc_irq", "pwr_irq";
> +
> +			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> +				 <&gcc GCC_SDCC1_APPS_CLK>,
> +				 <&xo_board>,
> +				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
> +			clock-names = "iface", "core", "xo", "ice";
> +
> +			pinctrl-0 = <&sdc1_state_on>;
> +			pinctrl-1 = <&sdc1_state_off>;
> +			pinctrl-names = "default", "sleep";
> +
> +			bus-width = <8>;
> +			status = "disabled";
> +		};
> +
> +		sdhc_2: mmc@4784000 {
> +			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
> +			reg = <0x04784000 0x1000>;
> +			reg-names = "hc";
> +
> +			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hc_irq", "pwr_irq";
> +
> +			clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>;
> +			clock-names = "iface", "core", "xo";
> +
> +			pinctrl-0 = <&sdc2_state_on>;
> +			pinctrl-1 = <&sdc2_state_off>;
> +			pinctrl-names = "default", "sleep";
> +
> +			power-domains = <&rpmpd SM6115_VDDCX>;
> +			operating-points-v2 = <&sdhc2_opp_table>;
> +			iommus = <&apps_smmu 0x00a0 0x0>;
> +			resets = <&gcc GCC_SDCC2_BCR>;
> +
> +			bus-width = <4>;
> +			qcom,dll-config = <0x0007642c>;
> +			qcom,ddr-config = <0x80040868>;
> +			status = "disabled";
> +
> +			sdhc2_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-100000000 {
> +					opp-hz = /bits/ 64 <100000000>;
> +					required-opps = <&rpmpd_opp_low_svs>;
> +				};
> +
> +				opp-202000000 {
> +					opp-hz = /bits/ 64 <202000000>;
> +					required-opps = <&rpmpd_opp_nom>;
> +				};
> +			};
> +		};
> +
> +		ufs_mem_hc: ufs@4804000 {
> +			compatible = "qcom,sm6115-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
> +			reg = <0x04804000 0x3000>, <0x04810000 0x8000>;
> +			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> +			phys = <&ufs_mem_phy_lanes>;
> +			phy-names = "ufsphy";
> +			lanes-per-direction = <1>;
> +			#reset-cells = <1>;
> +			resets = <&gcc GCC_UFS_PHY_BCR>;
> +			reset-names = "rst";
> +
> +			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
> +			iommus = <&apps_smmu 0x100 0>;
> +
> +			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
> +				 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
> +				 <&gcc GCC_UFS_PHY_AHB_CLK>,
> +				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> +				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
> +				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> +				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> +				 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
> +			clock-names = "core_clk",
> +				      "bus_aggr_clk",
> +				      "iface_clk",
> +				      "core_clk_unipro",
> +				      "ref_clk",
> +				      "tx_lane0_sync_clk",
> +				      "rx_lane0_sync_clk",
> +				      "ice_core_clk";
> +
> +			freq-table-hz = <50000000 200000000>,
> +					<0 0>,
> +					<0 0>,
> +					<37500000 150000000>,
> +					<75000000 300000000>,
> +					<0 0>,
> +					<0 0>,
> +					<0 0>;
> +
> +			status = "disabled";
> +		};
> +
> +		ufs_mem_phy: phy@4807000 {
> +			compatible = "qcom,sm6115-qmp-ufs-phy";
> +			reg = <0x04807000 0x1c4>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +
> +			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
> +			clock-names = "ref", "ref_aux";
> +
> +			resets = <&ufs_mem_hc 0>;
> +			reset-names = "ufsphy";
> +			status = "disabled";
> +
> +			ufs_mem_phy_lanes: phy@4807400 {
> +				reg = <0x4807400 0x098>,
> +				      <0x4807600 0x130>,
> +				      <0x4807c00 0x16c>;
> +				#phy-cells = <0>;
> +			};
> +		};
> +
> +		usb_1: usb@4ef8800 {
> +			compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
> +			reg = <0x04ef8800 0x400>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +
> +			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
> +				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
> +				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
> +				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
> +				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> +				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
> +			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", "xo";
> +
> +			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> +					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
> +			assigned-clock-rates = <19200000>, <66666667>;
> +
> +			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hs_phy_irq", "ss_phy_irq";
> +
> +			resets = <&gcc GCC_USB30_PRIM_BCR>;
> +			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
> +			qcom,select-utmi-as-pipe-clk;
> +			status = "disabled";
> +
> +			usb_1_dwc3: usb@4e00000 {
> +				compatible = "snps,dwc3";
> +				reg = <0x04e00000 0xcd00>;
> +				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> +				phys = <&usb_1_hsphy>;
> +				phy-names = "usb2-phy";
> +				iommus = <&apps_smmu 0x120 0x0>;
> +				snps,dis_u2_susphy_quirk;
> +				snps,dis_enblslpm_quirk;
> +				snps,has-lpm-erratum;
> +				snps,hird-threshold = /bits/ 8 <0x10>;
> +				snps,usb3_lpm_capable;
> +				maximum-speed = "high-speed";
> +				dr_mode = "peripheral";
> +			};
> +		};
> +
> +		apps_smmu: iommu@c600000 {
> +			compatible = "qcom,sm6115-smmu-500", "arm,mmu-500";
> +			reg = <0x0c600000 0x80000>;
> +			#iommu-cells = <2>;
> +			#global-interrupts = <1>;
> +
> +			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
> +		apcs_glb: mailbox@f111000 {
> +			compatible = "qcom,sm6115-apcs-hmss-global";
> +			reg = <0x0f111000 0x1000>;
> +
> +			#mbox-cells = <1>;
> +		};
> +
> +		timer@f120000 {
> +			compatible = "arm,armv7-timer-mem";
> +			reg = <0x0f120000 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			clock-frequency = <19200000>;
> +
> +			frame@f121000 {
> +				reg = <0x0f121000 0x1000>, <0x0f122000 0x1000>;
> +				frame-number = <0>;
> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +			};
> +
> +			frame@f123000 {
> +				reg = <0x0f123000 0x1000>;
> +				frame-number = <1>;
> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
> +			frame@f124000 {
> +				reg = <0x0f124000 0x1000>;
> +				frame-number = <2>;
> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
> +			frame@f125000 {
> +				reg = <0x0f125000 0x1000>;
> +				frame-number = <3>;
> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
> +			frame@f126000 {
> +				reg = <0x0f126000 0x1000>;
> +				frame-number = <4>;
> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
> +			frame@f127000 {
> +				reg = <0x0f127000 0x1000>;
> +				frame-number = <5>;
> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
> +			frame@f128000 {
> +				reg = <0x0f128000 0x1000>;
> +				frame-number = <6>;
> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		intc: interrupt-controller@f200000 {
> +			compatible = "arm,gic-v3";
> +			reg = <0x0f200000 0x10000>, <0x0f300000 0x100000>;
> +			#interrupt-cells = <3>;
> +			interrupt-controller;
> +			interrupt-parent = <&intc>;
> +			#redistributor-regions = <1>;
> +			redistributor-stride = <0x0 0x20000>;
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> +	};
> +};