diff mbox series

[v2,05/20] media: i2c: imx290: Drop imx290_write_buffered_reg()

Message ID 20221016061523.30127-6-laurent.pinchart@ideasonboard.com
State Accepted
Commit b817888a0c50962d4b51b9107e824f9aac6a9f3c
Headers show
Series media: i2c: imx290: Miscellaneous improvements | expand

Commit Message

Laurent Pinchart Oct. 16, 2022, 6:15 a.m. UTC 
The imx290_write_buffered_reg() function wraps a register write with
register hold, to enable changing multiple registers synchronously. It
is used for the gain only, which is an 8-bit register, defeating its
purpose.

The feature is useful, but should be implemented differently. Drop the
function for now, to prepare for a rework of register access.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 drivers/media/i2c/imx290.c | 32 +-------------------------------
 1 file changed, 1 insertion(+), 31 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index 0f32f391b2e7..5646f1704a1e 100644
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -413,41 +413,11 @@  static int imx290_set_register_array(struct imx290 *imx290,
 	return 0;
 }
 
-static int imx290_write_buffered_reg(struct imx290 *imx290, u16 address_low,
-				     u8 nr_regs, u32 value)
-{
-	unsigned int i;
-	int ret;
-
-	ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x01);
-	if (ret) {
-		dev_err(imx290->dev, "Error setting hold register\n");
-		return ret;
-	}
-
-	for (i = 0; i < nr_regs; i++) {
-		ret = imx290_write_reg(imx290, address_low + i,
-				       (u8)(value >> (i * 8)));
-		if (ret) {
-			dev_err(imx290->dev, "Error writing buffered registers\n");
-			return ret;
-		}
-	}
-
-	ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x00);
-	if (ret) {
-		dev_err(imx290->dev, "Error setting hold register\n");
-		return ret;
-	}
-
-	return ret;
-}
-
 static int imx290_set_gain(struct imx290 *imx290, u32 value)
 {
 	int ret;
 
-	ret = imx290_write_buffered_reg(imx290, IMX290_GAIN, 1, value);
+	ret = imx290_write_reg(imx290, IMX290_GAIN, value);
 	if (ret)
 		dev_err(imx290->dev, "Unable to write gain\n");