diff mbox series

[1/2] Bluetooth: hci_sync: Fix not setting static address

Message ID 20221010203522.1251151-1-brian.gix@intel.com
State New
Headers show
Series [1/2] Bluetooth: hci_sync: Fix not setting static address | expand

Commit Message

Brian Gix Oct. 10, 2022, 8:35 p.m. UTC 
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This attempts to program the address stored in hdev->static_addr after
the init sequence has been complete:

@ MGMT Command: Set Static A.. (0x002b) plen 6
        Address: C0:55:44:33:22:11 (Static)
@ MGMT Event: Command Complete (0x0001) plen 7
      Set Static Address (0x002b) plen 4
        Status: Success (0x00)
        Current settings: 0x00008200
          Low Energy
          Static Address
@ MGMT Event: New Settings (0x0006) plen 4
        Current settings: 0x00008200
          Low Energy
          Static Address
< HCI Command: LE Set Random.. (0x08|0x0005) plen 6
        Address: C0:55:44:33:22:11 (Static)
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Random Address (0x08|0x0005) ncmd 1
        Status: Success (0x00)
@ MGMT Event: Command Complete (0x0001) plen 7
      Set Powered (0x0005) plen 4
        Status: Success (0x00)
        Current settings: 0x00008201
          Powered
          Low Energy
          Static Address
@ MGMT Event: New Settings (0x0006) plen 4
        Current settings: 0x00008201
          Powered
          Low Energy
          Static Address

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Brian Gix <brian.gix@intel.com>
---
 net/bluetooth/hci_sync.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
diff mbox series

Patch

diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 76c3107c9f91..b53bb0ee9d39 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -3054,6 +3054,7 @@  int hci_update_name_sync(struct hci_dev *hdev)
  * Enable Authentication
  * lmp_bredr_capable(Set Fast Connectable -> Set Scan Type -> Set Class ->
  * Set Name -> Set EIR)
+ * HCI_FORCE_STATIC_ADDR | BDADDR_ANY && !HCI_BREDR_ENABLED (Set Static Address)
  */
 int hci_powered_update_sync(struct hci_dev *hdev)
 {
@@ -3093,6 +3094,23 @@  int hci_powered_update_sync(struct hci_dev *hdev)
 		hci_update_eir_sync(hdev);
 	}
 
+	/* If forcing static address is in use or there is no public
+	 * address use the static address as random address (but skip
+	 * the HCI command if the current random address is already the
+	 * static one.
+	 *
+	 * In case BR/EDR has been disabled on a dual-mode controller
+	 * and a static address has been configured, then use that
+	 * address instead of the public BR/EDR address.
+	 */
+	if (hci_dev_test_flag(hdev, HCI_FORCE_STATIC_ADDR) ||
+	    (!bacmp(&hdev->bdaddr, BDADDR_ANY) &&
+	    !hci_dev_test_flag(hdev, HCI_BREDR_ENABLED))) {
+		if (bacmp(&hdev->static_addr, BDADDR_ANY))
+			return hci_set_random_addr_sync(hdev,
+							&hdev->static_addr);
+	}
+
 	return 0;
 }