diff mbox series

[2/2] arm64: dts: freescale: imx8dxl-evk: enable mii_select node

Message ID 20221011194715.647439-2-shenwei.wang@nxp.com
State Accepted
Commit 4cce83203aecea5e15e2534be51b746ed41a9a46
Headers show
Series None | expand

Commit Message

Shenwei Wang Oct. 11, 2022, 7:47 p.m. UTC 
The mii_select node is used to determine the fec1's interface
type. Using "enable-active-high" property to configure the
interface type as "RMII". Deleting the property as "RGMII".

Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index ca2a43e0cbf6..35a8af2927ef 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -90,6 +90,16 @@  reg_usdhc2_vmmc: regulator-3 {
 		enable-active-high;
 		off-on-delay-us = <3480>;
 	};
+
+	mii_select: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "mii-select";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&scu_gpio 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
 };
 
 &eqos {