diff mbox series

[v3,2/3] iommu/mediatek: add support for 6-bit encoded port IDs

Message ID 20221001-iommu-support-v3-2-c7b3059b0d16@baylibre.com
State New
Headers show
Series [v3,1/3] dt-bindings: iommu: mediatek: add binding documentation for MT8365 SoC | expand

Commit Message

Alexandre Mergnat Oct. 10, 2022, 12:54 p.m. UTC 
From: Fabien Parent <fparent@baylibre.com>

Until now the port ID was always encoded as a 5-bit data. On MT8365,
the port ID is encoded as a 6-bit data. This requires to add extra
macro F_MMU_INT_ID_LARB_ID_EXT, and F_MMU_INT_ID_PORT_ID_EXT in order
to support 6-bit encoded port IDs.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 drivers/iommu/mtk_iommu.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 5a4e00e4bbbc..35e9731c3441 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -108,8 +108,12 @@ 
 #define F_MMU_INT_ID_SUB_COMM_ID(a)		(((a) >> 7) & 0x3)
 #define F_MMU_INT_ID_COMM_ID_EXT(a)		(((a) >> 10) & 0x7)
 #define F_MMU_INT_ID_SUB_COMM_ID_EXT(a)		(((a) >> 7) & 0x7)
+/* Macro for 5 bits lenght port ID field (default) */
 #define F_MMU_INT_ID_LARB_ID(a)			(((a) >> 7) & 0x7)
 #define F_MMU_INT_ID_PORT_ID(a)			(((a) >> 2) & 0x1f)
+/* Macro for 6 bits lenght port ID field */
+#define F_MMU_INT_ID_LARB_ID_EXT(a)		(((a) >> 8) & 0x7)
+#define F_MMU_INT_ID_PORT_ID_EXT(a)		(((a) >> 2) & 0x3f)
 
 #define MTK_PROTECT_PA_ALIGN			256
 #define MTK_IOMMU_BANK_SZ			0x1000
@@ -139,6 +143,7 @@ 
 #define IFA_IOMMU_PCIE_SUPPORT		BIT(16)
 #define PGTABLE_PA_35_EN		BIT(17)
 #define TF_PORT_TO_ADDR_MT8173		BIT(18)
+#define HAS_INT_ID_PORT_WIDTH_6		BIT(19)
 
 #define MTK_IOMMU_HAS_FLAG_MASK(pdata, _x, mask)	\
 				((((pdata)->flags) & (mask)) == (_x))
@@ -441,7 +446,11 @@  static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
 	fault_pa |= (u64)pa34_32 << 32;
 
 	if (MTK_IOMMU_IS_TYPE(plat_data, MTK_IOMMU_TYPE_MM)) {
-		fault_port = F_MMU_INT_ID_PORT_ID(regval);
+		if (MTK_IOMMU_HAS_FLAG(plat_data, HAS_INT_ID_PORT_WIDTH_6)) {
+			fault_port = F_MMU_INT_ID_PORT_ID_EXT(regval);
+		} else {
+			fault_port = F_MMU_INT_ID_PORT_ID(regval);
+		}
 		if (MTK_IOMMU_HAS_FLAG(plat_data, HAS_SUB_COMM_2BITS)) {
 			fault_larb = F_MMU_INT_ID_COMM_ID(regval);
 			sub_comm = F_MMU_INT_ID_SUB_COMM_ID(regval);
@@ -449,7 +458,11 @@  static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
 			fault_larb = F_MMU_INT_ID_COMM_ID_EXT(regval);
 			sub_comm = F_MMU_INT_ID_SUB_COMM_ID_EXT(regval);
 		} else {
-			fault_larb = F_MMU_INT_ID_LARB_ID(regval);
+			if (MTK_IOMMU_HAS_FLAG(plat_data, HAS_INT_ID_PORT_WIDTH_6)) {
+				fault_larb = F_MMU_INT_ID_LARB_ID_EXT(regval);
+			} else {
+				fault_larb = F_MMU_INT_ID_LARB_ID(regval);
+			}
 		}
 		fault_larb = data->plat_data->larbid_remap[fault_larb][sub_comm];
 	}