diff mbox

usb: phy: msm: Trigger USB state detection work in DRD mode

Message ID 1454699829-20324-1-git-send-email-srinivas.kandagatla@linaro.org
State New
Headers show

Commit Message

Srinivas Kandagatla Feb. 5, 2016, 7:17 p.m. UTC 
From: "Ivan T. Ivanov" <ivan.ivanov@linaro.org>


When working in Dual Role Device mode, USB state machine is not kicked,
when host or gadget drivers are loaded. Fix this be explicitly triggering
state detection on client driver load.

Issue is that if the board is booted without micro usb cable and usb
device attached, kernel fails to populate the usb host and device.
The reason for this is that the state machine worker logic only checks
for USB_DR_MODE_PERIPHERAL and USB_DR_MODE_HOST modes to run worker
thread. However if the phy is configured in OTG mode it would fail
to run the state machine, resulting in failure to detect for very
first time.

This patch fixes the issue by removing the explicit checks.

Issue is noticed on Qualcomm Dragon board DB410C.

[srinivas.kandagatla@linaro.org: Added more details to log]
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

---
 drivers/usb/phy/phy-msm-usb.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 970a30e..72b387d 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -757,14 +757,8 @@  static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
 	otg->host = host;
 	dev_dbg(otg->usb_phy->dev, "host driver registered w/ tranceiver\n");
 
-	/*
-	 * Kick the state machine work, if peripheral is not supported
-	 * or peripheral is already registered with us.
-	 */
-	if (motg->pdata->mode == USB_DR_MODE_HOST || otg->gadget) {
-		pm_runtime_get_sync(otg->usb_phy->dev);
-		schedule_work(&motg->sm_work);
-	}
+	pm_runtime_get_sync(otg->usb_phy->dev);
+	schedule_work(&motg->sm_work);
 
 	return 0;
 }
@@ -827,14 +821,8 @@  static int msm_otg_set_peripheral(struct usb_otg *otg,
 	dev_dbg(otg->usb_phy->dev,
 		"peripheral driver registered w/ tranceiver\n");
 
-	/*
-	 * Kick the state machine work, if host is not supported
-	 * or host is already registered with us.
-	 */
-	if (motg->pdata->mode == USB_DR_MODE_PERIPHERAL || otg->host) {
-		pm_runtime_get_sync(otg->usb_phy->dev);
-		schedule_work(&motg->sm_work);
-	}
+	pm_runtime_get_sync(otg->usb_phy->dev);
+	schedule_work(&motg->sm_work);
 
 	return 0;
 }