| Message ID | 20221003060201.14833-1-johnliu@nvidia.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2] devfreq: Support device update function | expand |
Hi, Basically, struct devfreq_dev_profile is used to pass the devfreq device data from devfreq driver to governor. But, This means that it passes the data from governor to devfreq driver reversely? On 22. 10. 3. 15:02, Johnny Liu wrote: > To realize interrupt-driven closed-loop governors, governors need to be Could you explain the detailed means of 'interrupt-driven closed-loop governors'? > able to send data to the underlying devfreq driver to ask for updating > the device settings, such as hardware registers for frequency limits, I think that governor is not able to get the hardware information direclty instead of devfreq driver. Usually, the devfreq driver should get the h/w info and then passed to governor if required. Lastly, this patch doesn't contain the any use-case of devfreq_update_dev(). I prefer to post the real use-case of this patch. > which are compared against the device frequency to generate interrupts > > Since governors might export several tunable parameters, users can > enforce different policies for the control logics. Under different > policies, governors need to send different information to inform the > devfreq driver to configure the device accordingly. > > The introduced update function improves the flexibility of governors > and acts as a communication interface between governors and devfreq > drivers. > > Signed-off-by: Johnny Liu <johnliu@nvidia.com> > --- > v2: Correct the function signature of devfreq_update_dev > > drivers/devfreq/governor.h | 8 ++++++++ > include/linux/devfreq.h | 8 ++++++++ > 2 files changed, 16 insertions(+) > > diff --git a/drivers/devfreq/governor.h b/drivers/devfreq/governor.h > index 0adfebc0467a..b5781fa549c7 100644 > --- a/drivers/devfreq/governor.h > +++ b/drivers/devfreq/governor.h > @@ -124,4 +124,12 @@ static inline int devfreq_update_stats(struct devfreq *df) > > return df->profile->get_dev_status(df->dev.parent, &df->last_status); > } > + > +static inline int devfreq_update_dev(struct devfreq *df, void *data) > +{ > + if (!df->profile->update) > + return -EINVAL; > + > + return df->profile->update(df->dev.parent, data); > +} > #endif /* _GOVERNOR_H */ > diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h > index 34aab4dd336c..91648e8f8d76 100644 > --- a/include/linux/devfreq.h > +++ b/include/linux/devfreq.h > @@ -92,6 +92,8 @@ struct devfreq_dev_status { > * devfreq.last_status. > * @get_cur_freq: The device should provide the current frequency > * at which it is operating. > + * @update: An optional function to allow governors send data back > + * to the devfreq driver to update the device settings. IMO, 'update' word is too generic. I think that 'update_device_data' is better to improve the readability. > * @exit: An optional callback that is called when devfreq > * is removing the devfreq object due to error or > * from devfreq_remove_device() call. If the user > @@ -114,6 +116,7 @@ struct devfreq_dev_profile { > int (*get_dev_status)(struct device *dev, > struct devfreq_dev_status *stat); > int (*get_cur_freq)(struct device *dev, unsigned long *freq); > + int (*update)(struct device *dev, void *data); > void (*exit)(struct device *dev); > > unsigned long *freq_table> @@ -451,6 +454,11 @@ static inline int devfreq_update_stats(struct devfreq *df) > { > return -EINVAL; > } > + > +static inline int devfreq_update_dev(struct devfreq *df, void *data) > +{ > + return -EINVAL; > +} > #endif /* CONFIG_PM_DEVFREQ */ > > #endif /* __LINUX_DEVFREQ_H__ */
diff --git a/drivers/devfreq/governor.h b/drivers/devfreq/governor.h index 0adfebc0467a..b5781fa549c7 100644 --- a/drivers/devfreq/governor.h +++ b/drivers/devfreq/governor.h @@ -124,4 +124,12 @@ static inline int devfreq_update_stats(struct devfreq *df) return df->profile->get_dev_status(df->dev.parent, &df->last_status); } + +static inline int devfreq_update_dev(struct devfreq *df, void *data) +{ + if (!df->profile->update) + return -EINVAL; + + return df->profile->update(df->dev.parent, data); +} #endif /* _GOVERNOR_H */ diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index 34aab4dd336c..91648e8f8d76 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -92,6 +92,8 @@ struct devfreq_dev_status { * devfreq.last_status. * @get_cur_freq: The device should provide the current frequency * at which it is operating. + * @update: An optional function to allow governors send data back + * to the devfreq driver to update the device settings. * @exit: An optional callback that is called when devfreq * is removing the devfreq object due to error or * from devfreq_remove_device() call. If the user @@ -114,6 +116,7 @@ struct devfreq_dev_profile { int (*get_dev_status)(struct device *dev, struct devfreq_dev_status *stat); int (*get_cur_freq)(struct device *dev, unsigned long *freq); + int (*update)(struct device *dev, void *data); void (*exit)(struct device *dev); unsigned long *freq_table; @@ -451,6 +454,11 @@ static inline int devfreq_update_stats(struct devfreq *df) { return -EINVAL; } + +static inline int devfreq_update_dev(struct devfreq *df, void *data) +{ + return -EINVAL; +} #endif /* CONFIG_PM_DEVFREQ */ #endif /* __LINUX_DEVFREQ_H__ */
To realize interrupt-driven closed-loop governors, governors need to be able to send data to the underlying devfreq driver to ask for updating the device settings, such as hardware registers for frequency limits, which are compared against the device frequency to generate interrupts. Since governors might export several tunable parameters, users can enforce different policies for the control logics. Under different policies, governors need to send different information to inform the devfreq driver to configure the device accordingly. The introduced update function improves the flexibility of governors and acts as a communication interface between governors and devfreq drivers. Signed-off-by: Johnny Liu <johnliu@nvidia.com> --- v2: Correct the function signature of devfreq_update_dev drivers/devfreq/governor.h | 8 ++++++++ include/linux/devfreq.h | 8 ++++++++ 2 files changed, 16 insertions(+)