Message ID | 20220924121900.222711-3-dmitry.baryshkov@linaro.org |
---|---|
State | Accepted |
Commit | 572e9fd6d14a4568ee731c84e54ceaa243c82408 |
Headers | show |
Series | drm/msm/dsi: Add support for DSI PHY on QCM2290 | expand |
On 2022-09-24 15:19:00, Dmitry Baryshkov wrote: > From: Loic Poulain <loic.poulain@linaro.org> > > The QCM2290 SoC a the 14nm (V2.0) single DSI phy. The platform is not > fully compatible with the standard 14nm PHY, so it requires a separate > compatible and config entry. > > Signed-off-by: Loic Poulain <loic.poulain@linaro.org> > [DB: rebased and updated commit msg] > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 ++ > drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 + > drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 17 +++++++++++++++++ > 3 files changed, 20 insertions(+) > > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > index 7fc0975cb869..ee6051367679 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > @@ -549,6 +549,8 @@ static const struct of_device_id dsi_phy_dt_match[] = { > #ifdef CONFIG_DRM_MSM_DSI_14NM_PHY > { .compatible = "qcom,dsi-phy-14nm", > .data = &dsi_phy_14nm_cfgs }, > + { .compatible = "qcom,dsi-phy-14nm-2290", > + .data = &dsi_phy_14nm_2290_cfgs }, > { .compatible = "qcom,dsi-phy-14nm-660", > .data = &dsi_phy_14nm_660_cfgs }, > { .compatible = "qcom,dsi-phy-14nm-8953", > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h > index 60a99c6525b2..1096afedd616 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h > @@ -50,6 +50,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs; > extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs; > extern const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs; > extern const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs; > +extern const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs; following alphabetical sorting (same as the other locations in this series), this should be above 660? > extern const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs; > extern const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs; > extern const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs; > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c > index 0f8f4ca46429..9f488adea7f5 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c > @@ -1081,3 +1081,20 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs = { > .io_start = { 0x1a94400, 0x1a96400 }, > .num_dsi_phy = 2, > }; > + > +const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs = { > + .has_phy_lane = true, > + .regulator_data = dsi_phy_14nm_17mA_regulators, > + .num_regulators = ARRAY_SIZE(dsi_phy_14nm_17mA_regulators), > + .ops = { > + .enable = dsi_14nm_phy_enable, > + .disable = dsi_14nm_phy_disable, > + .pll_init = dsi_pll_14nm_init, > + .save_pll_state = dsi_14nm_pll_save_state, > + .restore_pll_state = dsi_14nm_pll_restore_state, > + }, > + .min_pll_rate = VCO_MIN_RATE, > + .max_pll_rate = VCO_MAX_RATE, > + .io_start = { 0x5e94400 }, For sm6125 we also need this exact io_start (and a single PHY), do you think it makes sense to add a compatible that reuses the same struct (I can do that in a folloup patch) and/or generalize this struct (name)? However, our regulator setup appears to be different. I recall not finding any `vcca` supply in my downstream sources, and had this in my notes for a similar dsi_phy_14nm.c patch: sm6125 uses an RPM regulator https://github.com/sonyxperiadev/kernel/blob/f956fbd9a234033bd18234d456a2c32c126b38f3/arch/arm64/boot/dts/qcom/trinket-sde.dtsi#L388 - Marijn > + .num_dsi_phy = 1, > +}; > -- > 2.35.1 >
On Sat, 1 Oct 2022 at 19:00, Marijn Suijten <marijn.suijten@somainline.org> wrote: > > On 2022-09-24 15:19:00, Dmitry Baryshkov wrote: > > From: Loic Poulain <loic.poulain@linaro.org> > > > > The QCM2290 SoC a the 14nm (V2.0) single DSI phy. The platform is not > > fully compatible with the standard 14nm PHY, so it requires a separate > > compatible and config entry. > > > > Signed-off-by: Loic Poulain <loic.poulain@linaro.org> > > [DB: rebased and updated commit msg] > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > --- > > drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 ++ > > drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 + > > drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 17 +++++++++++++++++ > > 3 files changed, 20 insertions(+) > > > > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > > index 7fc0975cb869..ee6051367679 100644 > > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > > @@ -549,6 +549,8 @@ static const struct of_device_id dsi_phy_dt_match[] = { > > #ifdef CONFIG_DRM_MSM_DSI_14NM_PHY > > { .compatible = "qcom,dsi-phy-14nm", > > .data = &dsi_phy_14nm_cfgs }, > > + { .compatible = "qcom,dsi-phy-14nm-2290", > > + .data = &dsi_phy_14nm_2290_cfgs }, > > { .compatible = "qcom,dsi-phy-14nm-660", > > .data = &dsi_phy_14nm_660_cfgs }, > > { .compatible = "qcom,dsi-phy-14nm-8953", > > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h > > index 60a99c6525b2..1096afedd616 100644 > > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h > > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h > > @@ -50,6 +50,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs; > > extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs; > > extern const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs; > > extern const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs; > > +extern const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs; > > following alphabetical sorting (same as the other locations in this > series), this should be above 660? Ack > > > extern const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs; > > extern const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs; > > extern const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs; > > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c > > index 0f8f4ca46429..9f488adea7f5 100644 > > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c > > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c > > @@ -1081,3 +1081,20 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs = { > > .io_start = { 0x1a94400, 0x1a96400 }, > > .num_dsi_phy = 2, > > }; > > + > > +const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs = { > > + .has_phy_lane = true, > > + .regulator_data = dsi_phy_14nm_17mA_regulators, > > + .num_regulators = ARRAY_SIZE(dsi_phy_14nm_17mA_regulators), > > + .ops = { > > + .enable = dsi_14nm_phy_enable, > > + .disable = dsi_14nm_phy_disable, > > + .pll_init = dsi_pll_14nm_init, > > + .save_pll_state = dsi_14nm_pll_save_state, > > + .restore_pll_state = dsi_14nm_pll_restore_state, > > + }, > > + .min_pll_rate = VCO_MIN_RATE, > > + .max_pll_rate = VCO_MAX_RATE, > > + .io_start = { 0x5e94400 }, > > For sm6125 we also need this exact io_start (and a single PHY), do you > think it makes sense to add a compatible that reuses the same struct (I > can do that in a folloup patch) and/or generalize this struct (name)? > > However, our regulator setup appears to be different. I recall not > finding any `vcca` supply in my downstream sources, and had this in my > notes for a similar dsi_phy_14nm.c patch: > > sm6125 uses an RPM regulator > > https://github.com/sonyxperiadev/kernel/blob/f956fbd9a234033bd18234d456a2c32c126b38f3/arch/arm64/boot/dts/qcom/trinket-sde.dtsi#L388 I'd prefer a separate config for sm6125. This way you would be able to add voting on the MX domain if required.
On 2022-10-04 17:29:32, Dmitry Baryshkov wrote: > On Sat, 1 Oct 2022 at 19:00, Marijn Suijten > <marijn.suijten@somainline.org> wrote: > > [..] > > For sm6125 we also need this exact io_start (and a single PHY), do you > > think it makes sense to add a compatible that reuses the same struct (I > > can do that in a folloup patch) and/or generalize this struct (name)? > > > > However, our regulator setup appears to be different. I recall not > > finding any `vcca` supply in my downstream sources, and had this in my > > notes for a similar dsi_phy_14nm.c patch: > > > > sm6125 uses an RPM regulator > > > > https://github.com/sonyxperiadev/kernel/blob/f956fbd9a234033bd18234d456a2c32c126b38f3/arch/arm64/boot/dts/qcom/trinket-sde.dtsi#L388 > > I'd prefer a separate config for sm6125. This way you would be able to > add voting on the MX domain if required. Ack, I'll queue up a patch series for this SoC, with a dt-bindings patch that makes the vcca register optional for the sm6125 compatible. - Marijn
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c index 7fc0975cb869..ee6051367679 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c @@ -549,6 +549,8 @@ static const struct of_device_id dsi_phy_dt_match[] = { #ifdef CONFIG_DRM_MSM_DSI_14NM_PHY { .compatible = "qcom,dsi-phy-14nm", .data = &dsi_phy_14nm_cfgs }, + { .compatible = "qcom,dsi-phy-14nm-2290", + .data = &dsi_phy_14nm_2290_cfgs }, { .compatible = "qcom,dsi-phy-14nm-660", .data = &dsi_phy_14nm_660_cfgs }, { .compatible = "qcom,dsi-phy-14nm-8953", diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h index 60a99c6525b2..1096afedd616 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h @@ -50,6 +50,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs; extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs; extern const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs; extern const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs; +extern const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs; extern const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs; extern const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs; extern const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs; diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c index 0f8f4ca46429..9f488adea7f5 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c @@ -1081,3 +1081,20 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs = { .io_start = { 0x1a94400, 0x1a96400 }, .num_dsi_phy = 2, }; + +const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs = { + .has_phy_lane = true, + .regulator_data = dsi_phy_14nm_17mA_regulators, + .num_regulators = ARRAY_SIZE(dsi_phy_14nm_17mA_regulators), + .ops = { + .enable = dsi_14nm_phy_enable, + .disable = dsi_14nm_phy_disable, + .pll_init = dsi_pll_14nm_init, + .save_pll_state = dsi_14nm_pll_save_state, + .restore_pll_state = dsi_14nm_pll_restore_state, + }, + .min_pll_rate = VCO_MIN_RATE, + .max_pll_rate = VCO_MAX_RATE, + .io_start = { 0x5e94400 }, + .num_dsi_phy = 1, +};