@@ -751,7 +751,7 @@ vdd_gfx: s2@1700 {
};
&rpm_requests {
- pm8994-regulators {
+ regulators-0 {
compatible = "qcom,rpm-pm8994-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -963,7 +963,7 @@ vreg_lvs2a_1p8: lvs2 {
};
};
- pmi8994-regulators {
+ regulators-1 {
compatible = "qcom,rpm-pmi8994-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -162,7 +162,7 @@ cd {
};
&rpm_requests {
- pm8994-regulators {
+ regulators-0 {
compatible = "qcom,rpm-pm8994-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -47,7 +47,7 @@ &usb_hs_phy {
};
&rpm_requests {
- smd_rpm_regulators: pm8916-regulators {
+ smd_rpm_regulators: regulators {
compatible = "qcom,rpm-pm8916-regulators";
/* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */
@@ -58,7 +58,7 @@ &blsp1_uart2 {
};
&rpm_requests {
- pm8994_regulators: pm8994-regulators {
+ pm8994_regulators: regulators-0 {
compatible = "qcom,rpm-pm8994-regulators";
vdd_l1-supply = <&pm8994_s1>;
@@ -281,7 +281,7 @@ pm8994_l32: l32 {
};
};
- pmi8994_regulators: pmi8994-regulators {
+ pmi8994_regulators: regulators-1 {
compatible = "qcom,rpm-pmi8994-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -153,7 +153,7 @@ VDD_APC1: s11 {
};
&rpm_requests {
- pm8994-regulators {
+ regulators-0 {
compatible = "qcom,rpm-pm8994-regulators";
vdd_l1-supply = <&pm8994_s7>;
@@ -363,7 +363,7 @@ pm8994_l32: l32 {
pm8994_lvs2: lvs2 {};
};
- pmi8994_regulators: pmi8994-regulators {
+ pmi8994_regulators: regulators-1 {
compatible = "qcom,rpm-pmi8994-regulators";
vdd_s1-supply = <&vph_pwr>;
vdd_bst_byp-supply = <&vph_pwr>;
@@ -551,7 +551,7 @@ vdd_gfx: s2@1700 {
&rpm_requests {
/* These values were taken from the original firmware ACPI tables */
- pm8994_regulators: pm8994-regulators {
+ pm8994_regulators: regulators-0 {
compatible = "qcom,rpm-pm8994-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -835,7 +835,7 @@ vreg_l32a_1p8: l32 {
vreg_lvs2a_1p8: lvs2 { };
};
- pmi8994_regulators: pmi8994-regulators {
+ pmi8994_regulators: regulators-1 {
compatible = "qcom,rpm-pmi8994-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -186,7 +186,7 @@ vdd_gfx: s2@1700 {
&rpm_requests {
/* PMI8994 should probe first, because pmi8994_bby supplies some of PM8994's regulators */
- pmi8994_regulators: pmi8994-regulators {
+ pmi8994_regulators: regulators-0 {
compatible = "qcom,rpm-pmi8994-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -205,7 +205,7 @@ pmi8994_bby: boost-bypass {
};
};
- pm8994_regulators: pm8994-regulators {
+ pm8994_regulators: regulators-1 {
compatible = "qcom,rpm-pm8994-regulators";
vdd_s3-supply = <&vph_pwr>;
@@ -629,7 +629,7 @@ &pmi8994_wled {
};
&rpm_requests {
- pm8994-regulators {
+ regulators-0 {
compatible = "qcom,rpm-pm8994-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -413,7 +413,7 @@ &wcd9335 {
};
&rpm_requests {
- pm8994-regulators {
+ regulators-0 {
compatible = "qcom,rpm-pm8994-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -598,7 +598,7 @@ vreg_lvs2a_1p8: lvs2 {
};
};
- pmi8994-regulators {
+ regulators-1 {
compatible = "qcom,rpm-pmi8994-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -219,7 +219,7 @@ &venus {
};
&rpm_requests {
- pm8994-regulators {
+ regulators-0 {
vreg_l17a_2p8: l17 {
regulator-name = "vreg_l17a_2p8";
regulator-min-microvolt = <2500000>;
@@ -164,7 +164,7 @@ &venus {
};
&rpm_requests {
- pm8994-regulators {
+ regulators-0 {
vreg_l3a_0p875: l3 {
regulator-name = "vreg_l3a_0p875";
regulator-min-microvolt = <850000>;
@@ -216,7 +216,7 @@ &venus {
};
&rpm_requests {
- pm8994-regulators {
+ regulators-0 {
vreg_l3a_0p875: l3 {
regulator-name = "vreg_l3a_0p875";
regulator-min-microvolt = <850000>;
@@ -137,7 +137,7 @@ &qusb2phy {
};
&rpm_requests {
- pm8998-regulators {
+ regulators-0 {
compatible = "qcom,rpm-pm8998-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -390,7 +390,7 @@ &replicator1 {
};
&rpm_requests {
- pm8998-regulators {
+ regulators-0 {
compatible = "qcom,rpm-pm8998-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -588,7 +588,7 @@ vreg_lvs2a_1p8: lvs2 {
};
- pmi8998-regulators {
+ regulators-1 {
compatible = "qcom,rpm-pmi8998-regulators";
vdd_bob-supply = <&vph_pwr>;
@@ -168,7 +168,7 @@ &replicator1 {
};
&rpm_requests {
- pm8998-regulators {
+ regulators-0 {
compatible = "qcom,rpm-pm8998-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -366,7 +366,7 @@ vreg_lvs2a_1p8: lvs2 {
};
- pmi8998-regulators {
+ regulators-1 {
compatible = "qcom,rpm-pmi8998-regulators";
vdd_bob-supply = <&vph_pwr>;
@@ -288,7 +288,7 @@ &qusb2phy {
};
&rpm_requests {
- pm8998-regulators {
+ regulators-0 {
compatible = "qcom,rpm-pm8998-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -477,7 +477,7 @@ vreg_l28_3p0: l28 {
vreg_lvs2a_1p8: lvs2 { };
};
- pmi8998-regulators {
+ regulators-1 {
compatible = "qcom,rpm-pmi8998-regulators";
vdd_bob-supply = <&vph_pwr>;
@@ -375,7 +375,7 @@ &qusb2phy {
};
&rpm_requests {
- pm8998-regulators {
+ regulators-0 {
compatible = "qcom,rpm-pm8998-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -538,7 +538,7 @@ vreg_l28_3p0: l28 {
vreg_lvs2a_1p8: lvs2 { };
};
- pmi8998-regulators {
+ regulators-1 {
compatible = "qcom,rpm-pmi8998-regulators";
vdd_bob-supply = <&vph_pwr>;
@@ -125,7 +125,7 @@ &remoteproc_wcss {
};
&rpm_requests {
- pms405-regulators {
+ regulators {
compatible = "qcom,rpm-pms405-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -231,7 +231,7 @@ &qusb2phy1 {
};
&rpm_requests {
- pm660-regulators {
+ regulators-0 {
compatible = "qcom,rpm-pm660-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -313,7 +313,7 @@ vreg_l19a_3p3: l19 {
};
};
- pm660l-regulators {
+ regulators-1 {
compatible = "qcom,rpm-pm660l-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -260,7 +260,7 @@ &qusb2phy0 {
};
&rpm_requests {
- pm660l-regulators {
+ regulators-0 {
compatible = "qcom,rpm-pm660l-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -394,7 +394,7 @@ vreg_bob: bob {
};
};
- pm660-regulators {
+ regulators-1 {
compatible = "qcom,rpm-pm660-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -69,7 +69,7 @@ &sdhc_2 {
};
&rpm_requests {
- pm8953-regulators {
+ regulators {
compatible = "qcom,rpm-pm8953-regulators";
vdd_l1-supply = <&pm8953_s3>;
@@ -111,7 +111,7 @@ &qusb2phy0 {
};
&rpm_requests {
- pm660l-regulators {
+ regulators-0 {
compatible = "qcom,rpm-pm660l-regulators";
vdd_s1-supply = <&vph_pwr>;
@@ -206,7 +206,7 @@ vreg_bob: bob {
};
};
- pm660-regulators {
+ regulators-1 {
compatible = "qcom,rpm-pm660-regulators";
vdd_s1-supply = <&vph_pwr>;
Node names should be generic and new DT schema expects RPM regulators node to be just "regulators". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Changes since v1: 1. Fix more nodes. 2. Do not shuffle regulators around as it might impact probe order. --- arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 4 ++-- arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts | 2 +- arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts | 4 ++-- arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts | 2 +- arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts | 2 +- arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts | 2 +- arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 4 ++-- arch/arm64/boot/dts/qcom/msm8998-mtp.dts | 4 ++-- arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 2 +- arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts | 4 ++-- arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 2 +- arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts | 4 ++-- 22 files changed, 35 insertions(+), 35 deletions(-)