@@ -778,6 +778,10 @@ static int tb_init_port(struct tb_port *port)
if (!tb_port_read(port, &hop, TB_CFG_HOPS, 0, 2))
port->ctl_credits = hop.initial_credits;
+
+ res = usb4_port_hotplug_enable(port);
+ if (res)
+ return res;
}
if (!port->ctl_credits)
port->ctl_credits = 2;
@@ -1174,6 +1174,7 @@ int usb4_switch_add_ports(struct tb_switch *sw);
void usb4_switch_remove_ports(struct tb_switch *sw);
int usb4_port_unlock(struct tb_port *port);
+int usb4_port_hotplug_enable(struct tb_port *port);
int usb4_port_configure(struct tb_port *port);
void usb4_port_unconfigure(struct tb_port *port);
int usb4_port_configure_xdomain(struct tb_port *port);
@@ -308,6 +308,7 @@ struct tb_regs_port_header {
#define ADP_CS_5 0x05
#define ADP_CS_5_LCA_MASK GENMASK(28, 22)
#define ADP_CS_5_LCA_SHIFT 22
+#define ADP_CS_5_DHP BIT(31)
/* TMU adapter registers */
#define TMU_ADP_CS_3 0x03
@@ -1046,6 +1046,26 @@ int usb4_port_unlock(struct tb_port *port)
return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_4, 1);
}
+/**
+ * usb4_port_hotplug_enable() - Enables hotplug for a port
+ * @port: USB4 port to operate on
+ *
+ * Enables hot plug events on a given port. This is only intended
+ * to be used on lane, DP-IN, and DP-OUT adapters.
+ */
+int usb4_port_hotplug_enable(struct tb_port *port)
+{
+ int ret;
+ u32 val;
+
+ ret = tb_port_read(port, &val, TB_CFG_PORT, ADP_CS_5, 1);
+ if (ret)
+ return ret;
+
+ val &= ~ADP_CS_5_DHP;
+ return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_5, 1);
+}
+
static int usb4_port_set_configured(struct tb_port *port, bool configured)
{
int ret;
Software that has run before the USB4 CM in Linux runs may have disabled hotplug events for a given lane adapter. Other CMs such as that one distributed with Windows 11 will enable hotplug events. Do the same thing in the Linux CM which fixes hotplug events on "AMD Pink Sardine". Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> --- v1->v2: * Only send second patch as first was merged already * s/usb4_enable_hotplug/usb4_port_hotplug_enable/ * Clarify intended users in documentation comment * Only call for lane adapters * Add stable tag drivers/thunderbolt/switch.c | 4 ++++ drivers/thunderbolt/tb.h | 1 + drivers/thunderbolt/tb_regs.h | 1 + drivers/thunderbolt/usb4.c | 20 ++++++++++++++++++++ 4 files changed, 26 insertions(+)