@@ -104,7 +104,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb
-dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1.dtb
new file mode 100644
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Evoker board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include "sc7280-herobrine-evoker.dts"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+ model = "Google Evoker with LTE";
+ compatible = "google,evoker-sku512", "qcom,sc7280";
+};
new file mode 100644
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Evoker board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-evoker.dtsi"
+
+/ {
+ model = "Google Evoker";
+ compatible = "google,evoker", "qcom,sc7280";
+};
+
similarity index 93%
rename from arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts
rename to arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi
@@ -5,15 +5,8 @@
* Copyright 2022 Google LLC.
*/
-/dts-v1/;
-
#include "sc7280-herobrine.dtsi"
-/ {
- model = "Google Evoker";
- compatible = "google,evoker", "qcom,sc7280";
-};
-
/*
* ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
*
@@ -30,16 +23,15 @@ ap_tp_i2c: &i2c0 {
status = "okay";
clock-frequency = <400000>;
- trackpad: trackpad@2c {
- compatible = "hid-over-i2c";
- reg = <0x2c>;
+ trackpad: trackpad@15 {
+ compatible = "elan,ekth3000";
+ reg = <0x15>;
pinctrl-names = "default";
pinctrl-0 = <&tp_int_odl>;
interrupt-parent = <&tlmm>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
- hid-descr-addr = <0x20>;
vcc-supply = <&pp3300_z1>;
wakeup-source;
@@ -50,18 +42,15 @@ ts_i2c: &i2c13 {
status = "okay";
clock-frequency = <400000>;
- ap_ts: touchscreen@10 {
- compatible = "elan,ekth6915";
- reg = <0x10>;
- pinctrl-names = "default";
- pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
+ touchscreen: touchscreen@5d {
+ compatible = "goodix,gt7375p";
+ reg = <0x5d>;
interrupt-parent = <&tlmm>;
interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
-
- vcc33-supply = <&ts_avdd>;
+ vdd-supply = <&ts_avdd>;
};
};
@@ -90,7 +79,6 @@ &pcie1 {
status = "okay";
};
-/* For nvme */
&pcie1_phy {
status = "okay";
};
evoker have wifi/lte sku, add different dts for each sku. Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> --- (no changes since v1) arch/arm64/boot/dts/qcom/Makefile | 3 ++- .../dts/qcom/sc7280-herobrine-evoker-lte.dts | 14 ++++++++++ .../boot/dts/qcom/sc7280-herobrine-evoker.dts | 16 ++++++++++++ ...er-r0.dts => sc7280-herobrine-evoker.dtsi} | 26 +++++-------------- 4 files changed, 39 insertions(+), 20 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dts rename arch/arm64/boot/dts/qcom/{sc7280-herobrine-evoker-r0.dts => sc7280-herobrine-evoker.dtsi} (93%)