diff mbox series

[PULL,21/39] hw/net/lan9118: Signal TSFL_INT flag when TX FIFO reaches specified level

Message ID 20220922163536.1096175-22-peter.maydell@linaro.org
State Accepted
Commit 895a803ce91704f28c9b49621a4f589273289f1e
Headers show
Series [PULL,01/39] hw/net/can: fix Xilinx ZynqMP CAN RX FIFO logic | expand

Commit Message

Peter Maydell Sept. 22, 2022, 4:35 p.m. UTC 
From: Lucas Dietrich <ld.adecy@gmail.com>

The LAN9118 allows the guest to specify a level for both the TX and
RX FIFOs at which an interrupt will be generated.  We implement the
RSFL_INT interrupt for the RX FIFO but are missing the handling of
the equivalent TSFL_INT for the TX FIFO.  Add the missing test to set
the interrupt if the TX FIFO has exceeded the guest-specified level.

This flag is required for Micrium lan911x ethernet driver to work.

Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com>
[PMM: Tweaked commit message and comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/net/lan9118.c | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c
index 456ae38107b..f1cba559672 100644
--- a/hw/net/lan9118.c
+++ b/hw/net/lan9118.c
@@ -696,6 +696,14 @@  static void do_tx_packet(lan9118_state *s)
     n = (s->tx_status_fifo_head + s->tx_status_fifo_used) & 511;
     s->tx_status_fifo[n] = status;
     s->tx_status_fifo_used++;
+
+    /*
+     * Generate TSFL interrupt if TX FIFO level exceeds the level
+     * specified in the FIFO_INT TX Status Level field.
+     */
+    if (s->tx_status_fifo_used > ((s->fifo_int >> 16) & 0xff)) {
+        s->int_sts |= TSFL_INT;
+    }
     if (s->tx_status_fifo_used == 512) {
         s->int_sts |= TSFF_INT;
         /* TODO: Stop transmission.  */