@@ -162,65 +162,6 @@ module_param(setup_strings, charp, 0);
static void wd33c93_execute(struct Scsi_Host *instance);
-#ifdef CONFIG_WD33C93_PIO
-static inline uchar
-read_wd33c93(const wd33c93_regs regs, uchar reg_num)
-{
- uchar data;
-
- outb(reg_num, regs.SASR);
- data = inb(regs.SCMD);
- return data;
-}
-
-static inline unsigned long
-read_wd33c93_count(const wd33c93_regs regs)
-{
- unsigned long value;
-
- outb(WD_TRANSFER_COUNT_MSB, regs.SASR);
- value = inb(regs.SCMD) << 16;
- value |= inb(regs.SCMD) << 8;
- value |= inb(regs.SCMD);
- return value;
-}
-
-static inline uchar
-read_aux_stat(const wd33c93_regs regs)
-{
- return inb(regs.SASR);
-}
-
-static inline void
-write_wd33c93(const wd33c93_regs regs, uchar reg_num, uchar value)
-{
- outb(reg_num, regs.SASR);
- outb(value, regs.SCMD);
-}
-
-static inline void
-write_wd33c93_count(const wd33c93_regs regs, unsigned long value)
-{
- outb(WD_TRANSFER_COUNT_MSB, regs.SASR);
- outb((value >> 16) & 0xff, regs.SCMD);
- outb((value >> 8) & 0xff, regs.SCMD);
- outb( value & 0xff, regs.SCMD);
-}
-
-#define write_wd33c93_cmd(regs, cmd) \
- write_wd33c93((regs), WD_COMMAND, (cmd))
-
-static inline void
-write_wd33c93_cdb(const wd33c93_regs regs, uint len, uchar cmnd[])
-{
- int i;
-
- outb(WD_CDB_1, regs.SASR);
- for (i=0; i<len; i++)
- outb(cmnd[i], regs.SCMD);
-}
-
-#else /* CONFIG_WD33C93_PIO */
static inline uchar
read_wd33c93(const wd33c93_regs regs, uchar reg_num)
{
@@ -287,7 +228,6 @@ write_wd33c93_cdb(const wd33c93_regs regs, uint len, uchar cmnd[])
for (i = 0; i < len; i++)
*regs.SCMD = cmnd[i];
}
-#endif /* CONFIG_WD33C93_PIO */
static inline uchar
read_1_byte(const wd33c93_regs regs)
@@ -180,13 +180,8 @@
/* This is what the 3393 chip looks like to us */
typedef struct {
-#ifdef CONFIG_WD33C93_PIO
- unsigned int SASR;
- unsigned int SCMD;
-#else
volatile unsigned char *SASR;
volatile unsigned char *SCMD;
-#endif
} wd33c93_regs;
The historical commit 5e018f7e60c9 ("Remove PC9800 support") from 2004 in linux's history.git removed the config WD33C93_PIO to tweak the scsi wd33c93 driver for the PC9800. Some dead code in drivers/scsi/wd33c93.[ch] under an ifdef WD33C93_PIO continued to remain in the repository until now. Remove this dead code. This issue was discovered with ./scripts/checkkconfigsymbols.py. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> --- drivers/scsi/wd33c93.c | 60 ------------------------------------------ drivers/scsi/wd33c93.h | 5 ---- 2 files changed, 65 deletions(-)