diff mbox series

[v1,09/17] drm/mediatek: hdmi: add connector flag

Message ID 20220919-v1-9-4844816c9808@baylibre.com
State New
Headers show
Series [v1,01/17] dt-bindings: clk: mediatek: Add MT8195 DPI clocks | expand

Commit Message

Guillaume Ranquet Sept. 19, 2022, 4:56 p.m. UTC
Add a flag to indicate support for an external connector

Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>

Comments

Guillaume Ranquet Oct. 3, 2022, 3:39 p.m. UTC | #1
On Tue, 20 Sep 2022 12:38, AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com> wrote:
>Il 19/09/22 18:56, Guillaume Ranquet ha scritto:
>> Add a flag to indicate support for an external connector
>>
>> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
>>
>> diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_common.c b/drivers/gpu/drm/mediatek/mtk_hdmi_common.c
>> index 86653ebaacfd..30407603d693 100644
>> --- a/drivers/gpu/drm/mediatek/mtk_hdmi_common.c
>> +++ b/drivers/gpu/drm/mediatek/mtk_hdmi_common.c
>> @@ -199,20 +199,22 @@ int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi, struct platform_device *pdev,
>>   		goto put_device;
>>   	}
>>
>> -	remote = of_graph_get_remote_node(np, 1, 0);
>> -	if (!remote) {
>> -		ret = -EINVAL;
>> -		goto put_device;
>> -	}
>> -
>> -	if (!of_device_is_compatible(remote, "hdmi-connector")) {
>> -		hdmi->next_bridge = of_drm_find_bridge(remote);
>> -		if (!hdmi->next_bridge) {
>> -			dev_err(dev, "Waiting for external bridge\n");
>> -			of_node_put(remote);
>> -			ret = -EPROBE_DEFER;
>> +	if (hdmi->conf->has_connector) {
>
>If MT8195's DPI uses the internal HDMI->DP converter, I say that the external
>DP has HDMI input and DP output.
>Logically, you can't have a HDMI port that's connected to nothing.
>
>Please, rethink this change.
>
>Regards,
>Angelo

Hi Angelo,
Sorry for the late answer.

I have reworked this for V2, to use an hdmi connector device node to "bind"
both the hdmi and hdmi-ddc driver together as with "legacy" code.
So this patch is dropped in V2 (hopefully ready soon).

Just to make things clear, the hardware path on mt8195 is:
DPI1 -> HDMI Tx -> HDMI Phy
DP Intf1 -> DP Tx -> USB Type C Mux -> DP over USB-C

So there's no HDMI->DP converter involved.

Thx,
Guillaume.
diff mbox series

Patch

diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_common.c b/drivers/gpu/drm/mediatek/mtk_hdmi_common.c
index 86653ebaacfd..30407603d693 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_common.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_common.c
@@ -199,20 +199,22 @@  int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi, struct platform_device *pdev,
 		goto put_device;
 	}
 
-	remote = of_graph_get_remote_node(np, 1, 0);
-	if (!remote) {
-		ret = -EINVAL;
-		goto put_device;
-	}
-
-	if (!of_device_is_compatible(remote, "hdmi-connector")) {
-		hdmi->next_bridge = of_drm_find_bridge(remote);
-		if (!hdmi->next_bridge) {
-			dev_err(dev, "Waiting for external bridge\n");
-			of_node_put(remote);
-			ret = -EPROBE_DEFER;
+	if (hdmi->conf->has_connector) {
+		remote = of_graph_get_remote_node(np, 1, 0);
+		if (!remote) {
+			ret = -EINVAL;
 			goto put_device;
 		}
+
+		if (!of_device_is_compatible(remote, "hdmi-connector")) {
+			hdmi->next_bridge = of_drm_find_bridge(remote);
+			if (!hdmi->next_bridge) {
+				dev_err(dev, "Waiting for external bridge\n");
+				of_node_put(remote);
+				ret = -EPROBE_DEFER;
+				goto put_device;
+			}
+		}
 	}
 
 	i2c_np = of_parse_phandle(remote, "ddc-i2c-bus", 0);
@@ -325,6 +327,7 @@  int mtk_drm_hdmi_remove(struct platform_device *pdev)
 static const struct mtk_hdmi_conf mtk_hdmi_conf_mt2701 = {
 	.tz_disabled = true,
 	.has_cec = true,
+	.has_connector = true,
 	.bridge_funcs = &mtk_mt8183_hdmi_bridge_funcs,
 	.mtk_hdmi_output_init = mtk_hdmi_output_init_mt8183,
 	.mtk_hdmi_clk_disable = mtk_hdmi_clk_disable_audio_mt8183,
@@ -338,6 +341,7 @@  static const struct mtk_hdmi_conf mtk_hdmi_conf_mt8167 = {
 	.max_mode_clock = 148500,
 	.cea_modes_only = true,
 	.has_cec = true,
+	.has_connector = true,
 	.bridge_funcs = &mtk_mt8183_hdmi_bridge_funcs,
 	.mtk_hdmi_output_init = mtk_hdmi_output_init_mt8183,
 	.mtk_hdmi_clk_disable = mtk_hdmi_clk_disable_audio_mt8183,
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_common.h b/drivers/gpu/drm/mediatek/mtk_hdmi_common.h
index 921bde150e11..62a14435be69 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_common.h
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_common.h
@@ -32,6 +32,7 @@  struct mtk_hdmi_conf {
 	bool tz_disabled;
 	bool cea_modes_only;
 	bool has_cec;
+	bool has_connector;
 	unsigned long max_mode_clock;
 	const struct drm_bridge_funcs *bridge_funcs;
 	void (*mtk_hdmi_output_init)(struct mtk_hdmi *hdmi);