deleted file mode 100644
@@ -1,46 +0,0 @@
-* HID over I2C Device-Tree bindings
-
-HID over I2C provides support for various Human Interface Devices over the
-I2C bus. These devices can be for example touchpads, keyboards, touch screens
-or sensors.
-
-The specification has been written by Microsoft and is currently available here:
-http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
-
-If this binding is used, the kernel module i2c-hid will handle the communication
-with the device and the generic hid core layer will handle the protocol.
-
-Required properties:
-- compatible: must be "hid-over-i2c"
-- reg: i2c slave address
-- hid-descr-addr: HID descriptor address
-- interrupts: interrupt line
-
-Additional optional properties:
-
-Some devices may support additional optional properties to help with, e.g.,
-power sequencing. The following properties can be supported by one or more
-device-specific compatible properties, which should be used in addition to the
-"hid-over-i2c" string.
-
-- compatible:
- * "wacom,w9013" (Wacom W9013 digitizer). Supports:
- - vdd-supply (3.3V)
- - vddl-supply (1.8V)
- - post-power-on-delay-ms
-
-- vdd-supply: phandle of the regulator that provides the supply voltage.
-- post-power-on-delay-ms: time required by the device after enabling its regulators
- or powering it on, before it is ready for communication.
-- touchscreen-inverted-x: See touchscreen.txt
-- touchscreen-inverted-y: See touchscreen.txt
-
-Example:
-
- i2c-hid-dev@2c {
- compatible = "hid-over-i2c";
- reg = <0x2c>;
- hid-descr-addr = <0x0020>;
- interrupt-parent = <&gpx3>;
- interrupts = <3 2>;
- };
new file mode 100644
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/hid-over-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HID over I2C Devices
+
+maintainers:
+ - Benjamin Tissoires <benjamin.tissoires@redhat.com>
+ - Jiri Kosina <jkosina@suse.cz>
+
+description: |+
+ HID over I2C provides support for various Human Interface Devices over the
+ I2C bus. These devices can be for example touchpads, keyboards, touch screens
+ or sensors.
+
+ The specification has been written by Microsoft and is currently available here:
+ https://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
+
+ If this binding is used, the kernel module i2c-hid will handle the communication
+ with the device and the generic hid core layer will handle the protocol.
+
+allOf:
+ - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - wacom,w9013
+ - const: hid-over-i2c
+ - description: Just "hid-over-i2c" alone is allowed, but not recommended.
+ const: hid-over-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ hid-descr-addr:
+ description: HID descriptor address
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ post-power-on-delay-ms:
+ description: Time required by the device after enabling its regulators
+ or powering it on, before it is ready for communication.
+
+ touchscreen-inverted-x: true
+
+ touchscreen-inverted-y: true
+
+ vdd-supply:
+ description: 3.3V supply
+
+ vddl-supply:
+ description: 1.8V supply
+
+ wakeup-source: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ hid@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+ hid-descr-addr = <0x0020>;
+ interrupts = <3 2>;
+ };
+...
Convert the hid-over-i2c binding to DT schema format. The supplies should probably be specific to a specific device, but it seems they are already in use otherwise. 'wakeup-source' is added as it was not explicitly documented. There's a few warnings for undocumented properties 'vcc-supply' and 'reset-gpios'. Those remain as they probably should have a specific compatible as well. Signed-off-by: Rob Herring <robh@kernel.org> --- .../bindings/input/hid-over-i2c.txt | 46 ----------- .../bindings/input/hid-over-i2c.yaml | 78 +++++++++++++++++++ 2 files changed, 78 insertions(+), 46 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/hid-over-i2c.txt create mode 100644 Documentation/devicetree/bindings/input/hid-over-i2c.yaml