new file mode 100644
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr-channel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR channel with chip/rank topology description
+
+description:
+ An LPDDR channel is a completely independent set of LPDDR pins (DQ, CA, CS,
+ CK, etc.) that connect one or more LPDDR chips to a host system. The main
+ purpose of this node is to overall LPDDR topology of the system, including the
+ amount of individual LPDDR chips and the ranks per chip.
+
+maintainers:
+ - Julius Werner <jwerner@chromium.org>
+
+properties:
+ compatible:
+ enum:
+ - jedec,lpddr2-channel
+ - jedec,lpddr3-channel
+ - jedec,lpddr4-channel
+ - jedec,lpddr5-channel
+
+ io-width:
+ description:
+ The number of DQ pins in the channel. If this number is different
+ from (a multiple of) the io-width of the LPDDR chip, that means that
+ multiple instances of that type of chip are wired in parallel on this
+ channel (with the channel's DQ pins split up between the different
+ chips, and the CA, CS, etc. pins of the different chips all shorted
+ together). This means that the total physical memory controlled by a
+ channel is equal to the sum of the densities of each rank on the
+ connected LPDDR chip, times the io-width of the channel divided by
+ the io-width of the LPDDR chip.
+ enum:
+ - 8
+ - 16
+ - 32
+ - 64
+ - 128
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^rank@[0-9]+$":
+ type: object
+ description:
+ Each physical LPDDR chip may have one or more ranks. Ranks are
+ internal but fully independent sub-units of the chip. Each LPDDR bus
+ transaction on the channel targets exactly one rank, based on the
+ state of the CS pins. Different ranks may have different densities and
+ timing requirements.
+ required:
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: jedec,lpddr2-channel
+ then:
+ patternProperties:
+ "^rank@[0-9]+$":
+ $ref: /schemas/memory-controllers/ddr/jedec,lpddr2.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: jedec,lpddr3-channel
+ then:
+ patternProperties:
+ "^rank@[0-9]+$":
+ $ref: /schemas/memory-controllers/ddr/jedec,lpddr3.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: jedec,lpddr4-channel
+ then:
+ patternProperties:
+ "^rank@[0-9]+$":
+ $ref: /schemas/memory-controllers/ddr/jedec,lpddr4.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: jedec,lpddr5-channel
+ then:
+ patternProperties:
+ "^rank@[0-9]+$":
+ $ref: /schemas/memory-controllers/ddr/jedec,lpddr5.yaml#
+
+required:
+ - compatible
+ - io-width
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ lpddr-channel0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "jedec,lpddr3-channel";
+ io-width = <32>;
+
+ rank@0 {
+ compatible = "lpddr3-ff,0100", "jedec,lpddr3";
+ reg = <0>;
+ density = <8192>;
+ io-width = <16>;
+ revision-id = <1 0>;
+ };
+ };
+
+ lpddr-channel1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "jedec,lpddr4-channel";
+ io-width = <32>;
+
+ rank@0 {
+ compatible = "lpddr4-05,0301", "jedec,lpddr4";
+ reg = <0>;
+ density = <4096>;
+ io-width = <32>;
+ revision-id = <3 1>;
+ };
+
+ rank@1 {
+ compatible = "lpddr4-05,0301", "jedec,lpddr4";
+ reg = <1>;
+ density = <2048>;
+ io-width = <32>;
+ revision-id = <3 1>;
+ };
+ };
@@ -9,7 +9,8 @@ title: Common properties for LPDDR types
description:
Different LPDDR types generally use the same properties and only differ in the
range of legal values for each. This file defines the common parts that can be
- reused for each type.
+ reused for each type. Nodes using this schema should generally be nested under
+ an LPDDR channel node.
maintainers:
- Krzysztof Kozlowski <krzk@kernel.org>
@@ -25,6 +26,13 @@ properties:
The latter form can be useful when LPDDR nodes are created at runtime by
boot firmware that doesn't have access to static part number information.
+ reg:
+ description:
+ The rank number of this LPDDR rank when used as a subnode to an LPDDR
+ channel.
+ minimum: 0
+ maximum: 3
+
revision-id:
$ref: /schemas/types.yaml#/definitions/uint32-array
description:
This patch adds a new device tree binding for an LPDDR channel to serve as a top-level organizing node for LPDDR part nodes nested below it. An LPDDR channel needs to have an "io-width" property to describe its width (this is important because this width does not always match the io-width of the part number, indicating that multiple parts are wired in parallel on the same channel), as well as one or more nested "rank@X" nodes. Those represent information about the individual ranks of each LPDDR part connected on that channel and should match the existing "jedec,lpddrX" bindings for individual LPDDR parts. New platforms should be using this node -- the existing practice of providing a raw, toplevel "jedec,lpddrX" node without indication of how many identical parts are in the system should be considered deprecated. Signed-off-by: Julius Werner <jwerner@chromium.org> --- .../ddr/jedec,lpddr-channel.yaml | 146 ++++++++++++++++++ .../ddr/jedec,lpddr-props.yaml | 10 +- 2 files changed, 155 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml Changelog: - v2: - changed $ref for rank subnode to specifically match LPDDR type in compatible string - moved `reg` up to be listed right below `compatible` - v3: - no changes - v4: - no changes