@@ -53,7 +53,7 @@ system {
};
};
-&sdhci {
+&mmc {
status = "okay";
};
@@ -37,7 +37,7 @@ key-reset {
};
};
-&sdhci {
+&mmc {
status = "okay";
};
@@ -33,11 +33,6 @@ cpuintc: cpuintc {
compatible = "mti,cpu-interrupt-controller";
};
- aliases {
- serial0 = &uartlite;
- };
-
-
mmc_fixed_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "mmc_power";
@@ -115,12 +110,11 @@ memc: syscon@5000 {
reg = <0x5000 0x1000>;
};
- uartlite: uartlite@c00 {
+ serial0: serial@c00 {
compatible = "ns16550a";
reg = <0xc00 0x100>;
clocks = <&sysc MT7621_CLK_UART1>;
- clock-names = "uart1";
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -236,7 +230,7 @@ pinmux {
};
};
- sdhci: sdhci@1e130000 {
+ mmc: mmc@1e130000 {
status = "disabled";
compatible = "mediatek,mt7620-mmc";
@@ -262,8 +256,8 @@ sdhci: sdhci@1e130000 {
interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
};
- xhci: xhci@1e1c0000 {
- compatible = "mediatek,mt8173-xhci";
+ usb: usb@1e1c0000 {
+ compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci";
reg = <0x1e1c0000 0x1000
0x1e1d0700 0x0100>;
reg-names = "mac", "ippc";
@@ -338,7 +332,7 @@ fixed-link {
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
- status = "off";
+ status = "disabled";
phy-mode = "rgmii-rxid";
};
@@ -346,7 +340,7 @@ mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
- switch0: switch0@0 {
+ switch0: switch@0 {
compatible = "mediatek,mt7621";
reg = <0>;
mediatek,mcm;
@@ -362,31 +356,31 @@ ports {
#size-cells = <0>;
port@0 {
- status = "off";
+ status = "disabled";
reg = <0>;
label = "lan0";
};
port@1 {
- status = "off";
+ status = "disabled";
reg = <1>;
label = "lan1";
};
port@2 {
- status = "off";
+ status = "disabled";
reg = <2>;
label = "lan2";
};
port@3 {
- status = "off";
+ status = "disabled";
reg = <3>;
label = "lan3";
};
port@4 {
- status = "off";
+ status = "disabled";
reg = <4>;
label = "lan4";
};
Fix the dtc warnings below. uartlite@c00: $nodename:0: 'uartlite@c00' does not match '^serial(@.*)?$' From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/serial/8250.yaml uartlite@c00: Unevaluated properties are not allowed ('clock-names' was unexpected) From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/serial/8250.yaml sdhci@1e130000: $nodename:0: 'sdhci@1e130000' does not match '^mmc(@.*)?$' From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/mmc/mtk-sd.yaml sdhci@1e130000: Unevaluated properties are not allowed ('bus-width', 'cap-mmc-highspeed', 'cap-sd-highspeed', 'disable-wp', 'max-frequency', 'vmmc-supply', 'vqmmc-supply' were unexpected) From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/mmc/mtk-sd.yaml xhci@1e1c0000: $nodename:0: 'xhci@1e1c0000' does not match '^usb(@.*)?' From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml xhci@1e1c0000: compatible: ['mediatek,mt8173-xhci'] is too short From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml switch0@0: $nodename:0: 'switch0@0' does not match '^(ethernet-)?switch(@.*)?$' From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml port@1: status:0: 'off' is not one of ['okay', 'disabled', 'reserved'] From schema: /home/arinc9/.local/lib/python3.10/site-packages/dtschema/schemas/dt-core.yaml port@2: status:0: 'off' is not one of ['okay', 'disabled', 'reserved'] From schema: /home/arinc9/.local/lib/python3.10/site-packages/dtschema/schemas/dt-core.yaml port@3: status:0: 'off' is not one of ['okay', 'disabled', 'reserved'] From schema: /home/arinc9/.local/lib/python3.10/site-packages/dtschema/schemas/dt-core.yaml - Change "uartlite: uartlite@c00" to "serial0: serial@c00" and remove the aliases node. - Remove "clock-names" from the serial0 node. The property doesn't exist on the 8250.yaml schema. - Change "sdhci: sdhci@1e130000" to "mmc: mmc@1e130000". - Change "xhci: xhci@1e1c0000" to "usb: usb@1e1c0000". - Add "mediatek,mtk-xhci" as the second compatible string on the usb node. - Change "switch0: switch0@0" to "switch0: switch@0" - Change "off" to "disabled" for disabled nodes. Remaining warnings are caused by the lack of json-schema documentation. /cpuintc: failed to match any schema with compatible: ['mti,cpu-interrupt-controller'] /palmbus@1e000000/wdt@100: failed to match any schema with compatible: ['mediatek,mt7621-wdt'] /palmbus@1e000000/i2c@900: failed to match any schema with compatible: ['mediatek,mt7621-i2c'] /palmbus@1e000000/spi@b00: failed to match any schema with compatible: ['ralink,mt7621-spi'] /ethernet@1e100000: failed to match any schema with compatible: ['mediatek,mt7621-eth'] Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> --- .../boot/dts/ralink/mt7621-gnubee-gb-pc1.dts | 2 +- .../boot/dts/ralink/mt7621-gnubee-gb-pc2.dts | 2 +- arch/mips/boot/dts/ralink/mt7621.dtsi | 28 ++++++++----------- 3 files changed, 13 insertions(+), 19 deletions(-)