@@ -137,6 +137,16 @@ reg_3p3v: regulator@1 {
regulator-always-on;
};
+ reg_can1_stby: regulator-can1-stby {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_can1>;
+ compatible = "regulator-fixed";
+ regulator-name = "can1_stby";
+ gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
reg_usb_h1_vbus: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
@@ -200,6 +210,7 @@ IMX_AUDMUX_V2_PTCR_SYN
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can1_stby>;
status = "okay";
};
@@ -687,7 +698,6 @@ pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
>;
};
@@ -786,6 +796,12 @@ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
>;
};
+ pinctrl_reg_can1: regcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
The GW54xx has a tranceiver with a STBY pin connected to an IMX6 GPIO. Configure this as a regulator to drive it low when CAN is in use. Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)