@@ -10,7 +10,6 @@ config LOONGARCH
select ARCH_ENABLE_MEMORY_HOTPLUG
select ARCH_ENABLE_MEMORY_HOTREMOVE
select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
- select ARCH_HAS_PHYS_TO_DMA
select ARCH_HAS_PTE_SPECIAL
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_INLINE_READ_LOCK if !PREEMPTION
@@ -2,39 +2,29 @@
/*
* Copyright (C) 2020-2022 Loongson Technology Corporation Limited
*/
-#include <linux/init.h>
+#include <linux/acpi.h>
#include <linux/dma-direct.h>
-#include <linux/dma-mapping.h>
-#include <linux/dma-map-ops.h>
-#include <linux/swiotlb.h>
-#include <asm/bootinfo.h>
-#include <asm/dma.h>
-#include <asm/loongson.h>
-
-/*
- * We extract 4bit node id (bit 44~47) from Loongson-3's
- * 48bit physical address space and embed it into 40bit.
- */
-
-static int node_id_offset;
-
-dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
- long nid = (paddr >> 44) & 0xf;
-
- return ((nid << 44) ^ paddr) | (nid << node_id_offset);
-}
-
-phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+void acpi_arch_dma_setup(struct device *dev)
{
- long nid = (daddr >> node_id_offset) & 0xf;
+ int ret;
+ u64 mask, end = 0;
+ const struct bus_dma_region *map = NULL;
+
+ ret = acpi_dma_get_range(dev, &map);
+ if (!ret && map) {
+ const struct bus_dma_region *r = map;
+
+ for (end = 0; r->size; r++) {
+ if (r->dma_start + r->size - 1 > end)
+ end = r->dma_start + r->size - 1;
+ }
+
+ mask = DMA_BIT_MASK(ilog2(end) + 1);
+ dev->bus_dma_limit = end;
+ dev->dma_range_map = map;
+ dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask);
+ *dev->dma_mask = min(*dev->dma_mask, mask);
+ }
- return ((nid << node_id_offset) ^ daddr) | (nid << 44);
-}
-
-void __init plat_swiotlb_setup(void)
-{
- swiotlb_init(true, SWIOTLB_VERBOSE);
- node_id_offset = ((readl(LS7A_DMA_CFG) & LS7A_DMA_NODE_MASK) >> LS7A_DMA_NODE_SHF) + 36;
}
@@ -247,7 +247,7 @@ static void __init arch_mem_init(char **cmdline_p)
sparse_init();
memblock_set_bottom_up(true);
- plat_swiotlb_setup();
+ swiotlb_init(true, SWIOTLB_VERBOSE);
dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
@@ -279,14 +279,17 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) { }
void acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa);
+#if defined(CONFIG_ARM64) || defined(CONFIG_LOONGARCH)
+void acpi_arch_dma_setup(struct device *dev);
+#else
+static inline void acpi_arch_dma_setup(struct device *dev) { }
+#endif
+
#ifdef CONFIG_ARM64
void acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa);
-void acpi_arch_dma_setup(struct device *dev);
#else
static inline void
acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { }
-static inline void
-acpi_arch_dma_setup(struct device *dev) { }
#endif
int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
Use _DMA defined in ACPI spec for translation between DMA address and CPU address, and implement acpi_arch_dma_setup for initializing dev->dma_range_map, where acpi_dma_get_range is called for parsing _DMA. e.g. If we have two dma ranges: cpu address dma address size offset 0x200080000000 0x2080000000 0x400000000 0x1fe000000000 0x400080000000 0x4080000000 0x400000000 0x3fc000000000 _DMA for pci devices should be declared in host bridge as flowing: Name (_DMA, ResourceTemplate() { QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite, 0x0, 0x4080000000, 0x447fffffff, 0x3fc000000000, 0x400000000, , , ) QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite, 0x0, 0x2080000000, 0x247fffffff, 0x1fe000000000, 0x400000000, , , ) }) Acked-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> --- arch/loongarch/Kconfig | 1 - arch/loongarch/kernel/dma.c | 52 ++++++++++++++--------------------- arch/loongarch/kernel/setup.c | 2 +- include/linux/acpi.h | 9 ++++-- 4 files changed, 28 insertions(+), 36 deletions(-)