| Message ID | 20220908080938.29199-2-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Accepted |
| Commit | c95243eeae587c0fbcaaf53bec9233400005c973 |
| Headers | show |
| Series | [1/3] ARM: dts: qcom: use generic node name "gpio" in SPMI PMIC | expand |
diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi index 8a4972e6a24c..3cfd3eadccbf 100644 --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -86,7 +86,7 @@ pm6150_adc_tm: adc-tm@3500 { status = "disabled"; }; - pm6150_gpio: gpios@c000 { + pm6150_gpio: gpio@c000 { compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index f02c223ef448..8a7c18b134c7 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -55,7 +55,7 @@ pm6150l_adc_tm: adc-tm@3500 { status = "disabled"; }; - pm6150l_gpio: gpios@c000 { + pm6150l_gpio: gpio@c000 { compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm6350.dtsi b/arch/arm64/boot/dts/qcom/pm6350.dtsi index ecf9b9919182..18c14257e2c1 100644 --- a/arch/arm64/boot/dts/qcom/pm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6350.dtsi @@ -35,7 +35,7 @@ pm6350_resin: resin { }; }; - pm6350_gpios: gpios@c000 { + pm6350_gpios: gpio@c000 { compatible = "qcom,pm6350-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index e1622b16c08b..ab934ff51f6d 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -170,7 +170,7 @@ vcoin: vcoin@83 { }; }; - pm660_gpios: gpios@c000 { + pm660_gpios: gpio@c000 { compatible = "qcom,pm660-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index 8aa0a5078772..f9b3864bd3b9 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -48,7 +48,7 @@ pm660l_temp: temp-alarm@2400 { #thermal-sensor-cells = <0>; }; - pm660l_gpios: gpios@c000 { + pm660l_gpios: gpio@c000 { compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi b/arch/arm64/boot/dts/qcom/pm7325.dtsi index e7f64a9ddc9c..cfd4b80c6e35 100644 --- a/arch/arm64/boot/dts/qcom/pm7325.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi @@ -18,7 +18,7 @@ pm7325_temp_alarm: temp-alarm@a00 { #thermal-sensor-cells = <0>; }; - pm7325_gpios: gpios@8800 { + pm7325_gpios: gpio@8800 { compatible = "qcom,pm7325-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi index 50fb6c753bf8..8d4b081b4e9d 100644 --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi @@ -11,7 +11,7 @@ pm8005_lsid0: pmic@4 { #address-cells = <1>; #size-cells = <0>; - pm8005_gpio: gpios@c000 { + pm8005_gpio: gpio@c000 { compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 606c2a6d1f0f..08f9ca006e72 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -107,7 +107,7 @@ pm8916_mpps: mpps@a000 { #interrupt-cells = <2>; }; - pm8916_gpios: gpios@c000 { + pm8916_gpios: gpio@c000 { compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index e92e5ac414d3..672094c8ca58 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -108,7 +108,7 @@ adc-chan@f { }; }; - pm8994_gpios: gpios@c000 { + pm8994_gpios: gpio@c000 { compatible = "qcom,pm8994-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index d09f2954b6f9..0d5163c720b7 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -101,7 +101,7 @@ rtc@6000 { interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pm8998_gpio: gpios@c000 { + pm8998_gpio: gpio@c000 { compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index 2e8b58f944e9..92a139ca4482 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -10,7 +10,7 @@ pmic@2 { #address-cells = <1>; #size-cells = <0>; - pmi8994_gpios: gpios@c000 { + pmi8994_gpios: gpio@c000 { compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index 3852a012bb0f..485bebb685f0 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -9,7 +9,7 @@ pmi8998_lsid0: pmic@2 { #address-cells = <1>; #size-cells = <0>; - pmi8998_gpio: gpios@c000 { + pmi8998_gpio: gpio@c000 { compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller;
GPIO controller nodes are named by convention just "gpio", not "gpios". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/qcom/pm6150.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm6150l.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm6350.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm660.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm660l.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm7325.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm8005.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm8916.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm8994.dtsi | 2 +- arch/arm64/boot/dts/qcom/pm8998.dtsi | 2 +- arch/arm64/boot/dts/qcom/pmi8994.dtsi | 2 +- arch/arm64/boot/dts/qcom/pmi8998.dtsi | 2 +- 12 files changed, 12 insertions(+), 12 deletions(-)