diff mbox series

[v4,10/10] riscv: dts: microchip: add a devicetree for aries' m100pfsevp

Message ID 20220908111712.665287-11-conor.dooley@microchip.com
State Accepted
Commit d49166646e44064b694a2e631fcdba4f814746d9
Headers show
Series New PolarFire SoC devkit devicetrees & 22.09 reference design updates | expand

Commit Message

Conor Dooley Sept. 8, 2022, 11:17 a.m. UTC
Add device trees for both configs used by the Aries Embedded
M100PFSEVP. The M100OFSEVP consists of a MPFS250T on a SOM,
featuring:
- 2GB DDR4 SDRAM dedicated to the HMS
- 512MB DDR4 SDRAM dedicated to the FPGA
- 32 MB SPI NOR Flash
- 4 GByte eMMC

and a carrier board with:
- 2x Gigabit Ethernet
- USB
- 2x UART
- 2x CAN
- TFT connector
- HSMC extension connector
- 3x PMOD extension connectors
- microSD-card slot

Link: https://www.aries-embedded.com/polarfire-soc-fpga-microsemi-m100pfs-som-mpfs025t-pcie-serdes
Link: https://www.aries-embedded.com/evaluation-kit/fpga/polarfire-microchip-soc-fpga-m100pfsevp-riscv-hsmc-pmod
Link: https://downloads.aries-embedded.de/products/M100PFS/Hardware/M100PFSEVP-Schematics.pdf
Co-developed-by: Wolfgang Grandegger <wg@aries-embedded.de>
Signed-off-by: Wolfgang Grandegger <wg@aries-embedded.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
 arch/riscv/boot/dts/microchip/Makefile        |   1 +
 .../dts/microchip/mpfs-m100pfs-fabric.dtsi    |  45 +++++
 .../boot/dts/microchip/mpfs-m100pfsevp.dts    | 179 ++++++++++++++++++
 3 files changed, 225 insertions(+)
 create mode 100644 arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi
 create mode 100644 arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile
index f18477b2e86d..7427a20934f3 100644
--- a/arch/riscv/boot/dts/microchip/Makefile
+++ b/arch/riscv/boot/dts/microchip/Makefile
@@ -1,5 +1,6 @@ 
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb
+dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp.dtb
 dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb
 dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-sev-kit.dtb
 obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi
new file mode 100644
index 000000000000..7b9ee13b6a3a
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi
@@ -0,0 +1,45 @@ 
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2022 Microchip Technology Inc */
+
+/ {
+	fabric_clk3: fabric-clk3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <62500000>;
+	};
+
+	fabric_clk1: fabric-clk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	pcie: pcie@2000000000 {
+		compatible = "microchip,pcie-host-1.0";
+		#address-cells = <0x3>;
+		#interrupt-cells = <0x1>;
+		#size-cells = <0x2>;
+		device_type = "pci";
+		reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
+		reg-names = "cfg", "apb";
+		bus-range = <0x0 0x7f>;
+		interrupt-parent = <&plic>;
+		interrupts = <119>;
+		interrupt-map = <0 0 0 1 &pcie_intc 0>,
+				<0 0 0 2 &pcie_intc 1>,
+				<0 0 0 3 &pcie_intc 2>,
+				<0 0 0 4 &pcie_intc 3>;
+		interrupt-map-mask = <0 0 0 7>;
+		clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
+		clock-names = "fic0", "fic1", "fic3";
+		ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
+		msi-parent = <&pcie>;
+		msi-controller;
+		status = "disabled";
+		pcie_intc: interrupt-controller {
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts
new file mode 100644
index 000000000000..184cb36a175e
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts
@@ -0,0 +1,179 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Original all-in-one devicetree:
+ * Copyright (C) 2021-2022 - Wolfgang Grandegger <wg@aries-embedded.de>
+ * Rewritten to use includes:
+ * Copyright (C) 2022 - Conor Dooley <conor.dooley@microchip.com>
+ */
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-m100pfs-fabric.dtsi"
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define MTIMER_FREQ	1000000
+
+/ {
+	model = "Aries Embedded M100PFEVPS";
+	compatible = "aries,m100pfsevp", "microchip,mpfs";
+
+	aliases {
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
+		serial0 = &mmuart0;
+		serial1 = &mmuart1;
+		serial2 = &mmuart2;
+		serial3 = &mmuart3;
+		serial4 = &mmuart4;
+		gpio0 = &gpio0;
+		gpio1 = &gpio2;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <MTIMER_FREQ>;
+	};
+
+	ddrc_cache_lo: memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+	};
+	ddrc_cache_hi: memory@1040000000 {
+		device_type = "memory";
+		reg = <0x10 0x40000000 0x0 0x40000000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&gpio0 {
+	interrupts = <13>, <14>, <15>, <16>,
+		     <17>, <18>, <19>, <20>,
+		     <21>, <22>, <23>, <24>,
+		     <25>, <26>;
+	ngpios = <14>;
+	status = "okay";
+
+	pmic-irq-hog {
+		gpio-hog;
+		gpios = <13 0>;
+		input;
+	};
+
+	/* Set to low for eMMC, high for SD-card */
+	mmc-sel-hog {
+		gpio-hog;
+		gpios = <12 0>;
+		output-high;
+	};
+};
+
+&gpio2 {
+	interrupts = <13>, <14>, <15>, <16>,
+		     <17>, <18>, <19>, <20>,
+		     <21>, <22>, <23>, <24>,
+		     <25>, <26>, <27>, <28>,
+		     <29>, <30>, <31>, <32>,
+		     <33>, <34>, <35>, <36>,
+		     <37>, <38>, <39>, <40>,
+		     <41>, <42>, <43>, <44>;
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	phy-mode = "gmii";
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mac1 {
+	status = "okay";
+	phy-mode = "gmii";
+	phy-handle = <&phy1>;
+	phy1: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mbox {
+	status = "okay";
+};
+
+&mmc {
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	no-1-8-v;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	disable-wp;
+	status = "okay";
+};
+
+&mmuart1 {
+	status = "okay";
+};
+
+&mmuart2 {
+	status = "okay";
+};
+
+&mmuart3 {
+	status = "okay";
+};
+
+&mmuart4 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+};
+
+&refclk {
+	clock-frequency = <125000000>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&syscontroller {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};