diff mbox series

[3/5] arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema

Message ID 20220908081050.29751-3-krzysztof.kozlowski@linaro.org
State Accepted
Commit b94d7c1fc7c6ac4e2ce83e9fc6a84fc3034b631c
Headers show
Series [1/5] arm64: dts: qcom: pmi8994: add missing MPP compatible fallback | expand

Commit Message

Krzysztof Kozlowski Sept. 8, 2022, 8:10 a.m. UTC 
Bindings expect PMIC GPIO pin configuration nodes to be named with
'-state' suffix:

  qcom/msm8996-xiaomi-scorpio.dtb: pmic@0: gpio@c000: 'irled-default', 'keypad-default' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'

Drop also additional indentation via "pinconf" to make the code a bit
smaller.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../boot/dts/qcom/msm8996-xiaomi-common.dtsi     | 16 +++++++---------
 .../boot/dts/qcom/msm8996-xiaomi-scorpio.dts     | 16 +++++++---------
 2 files changed, 14 insertions(+), 18 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index 6d6e0fb4d270..78a1977d0593 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -651,15 +651,13 @@  vdd_gfx: s2 {
 };
 
 &pm8994_gpios {
-	irled_default: irled-default {
-		pinconf {
-			pins = "gpio5";
-			function = PMIC_GPIO_FUNC_FUNC1;
-			output-low;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
-			power-source = <PM8994_GPIO_S4>;
-			bias-disable;
-		};
+	irled_default: irled-default-state {
+		pins = "gpio5";
+		function = PMIC_GPIO_FUNC_FUNC1;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+		power-source = <PM8994_GPIO_S4>;
+		bias-disable;
 	};
 
 	wlan_en_default: wlan-en-state {
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts
index d287fa77e45a..895050831267 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts
@@ -278,15 +278,13 @@  &pm8994_gpios {
 		"UIM_BATT_ALARM",	/* GPIO_21 */
 		"NC";			/* GPIO_22 */
 
-	keypad_default: keypad-default {
-		pinconf {
-			pins = "gpio7", "gpio10";
-			function = PMIC_GPIO_FUNC_FUNC1;
-			output-low;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			power-source = <PM8994_GPIO_S4>;
-			bias-disable;
-		};
+	keypad_default: keypad-default-state {
+		pins = "gpio7", "gpio10";
+		function = PMIC_GPIO_FUNC_FUNC1;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <PM8994_GPIO_S4>;
+		bias-disable;
 	};
 };