@@ -160,5 +160,6 @@ pcieb_ep: pcie_ep@5f010000 {
num-ib-windows = <6>;
num-ob-windows = <6>;
status = "disabled";
+ MSI-parent = <&lsio_mu12>;
};
@@ -172,6 +172,19 @@ lsio_mu6: mailbox@5d210000 {
status = "disabled";
};
+ lsio_mu12: mailbox@5d270000 {
+ compatible = "fsl,imx6sx-mu-MSI";
+ msi-controller;
+ interrupt-controller;
+ reg = <0x5d270000 0x10000>, /* A side */
+ <0x5d300000 0x10000>; /* B side */
+ reg-names = "a", "b";
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd IMX_SC_R_MU_12A>,
+ <&pd IMX_SC_R_MU_12B>;
+ power-domain-names = "a", "b";
+ };
+
Change Log
- Change from v7 to v8
irqchip: using name process-a-side as resource bind name
┌───────┐ ┌──────────┐ │ │ │ │ ┌─────────────┐ │ │ │ PCI Host │ │ MSI │◄┐ │ │ │ │ │ Controller │ │ │ │ │ │ └─────────────┘ └─┼───────┼──────────┼─Bar0 │ │ PCI │ │ Bar1 │ │ Func │ │ Bar2 │ │ │ │ Bar3 │ │ │ │ Bar4 │ │ ├─────────►│ │ └───────┘ └──────────┘ Many PCI controllers provided Endpoint functions. Generally PCI endpoint is hardware, which is not running a rich OS, like linux. But Linux also supports endpoint functions. PCI Host write BAR<n> space like write to memory. The EP side can't know memory changed by the Host driver. PCI Spec has not defined a standard method to do that. Only define MSI(x) to let EP notified RC status change. The basic idea is to trigger an IRQ when PCI RC writes to a memory address. That's what MSI controller provided. EP drivers just need to request a platform MSI interrupt, struct MSI_msg *msg will pass down a memory address and data. EP driver will map such memory address to one of PCI BAR<n>. Host just writes such an address to trigger EP side IRQ. If system have gic-its, only need update PCI EP side driver. But i.MX have not chip support gic-its yet. So we have to use MU to simulate a MSI controller. Although only 4 MSI IRQs are simulated, it matched vntb(pci-epf-vntb) network requirement. After enable MSI, ping delay reduce < 1ms from ~8ms IRQchip: imx mu worked as MSI controller: let imx mu worked as MSI controllers. Although IP is not design as MSI controller, we still can use it if limited IRQ number to 4. pcie: endpoint: pci-epf-vntb: add endpoint MSI support Based on ntb-next branch. https://github.com/jonmason/ntb/commits/ntb-next Using MSI as door bell registers This patch is totally independent on previous on. It can be applied to ntb-next seperately. i.MX EP function driver is upstreaming by Richard Zhu. Some dts change missed at this patches. below is reference dts change pcie: endpoint: - fix build error reported by kernel test robot <lkp@intel.com> - rename epf_db_phy to epf_db_phys - rework error message - rework commit message - change ntb to vtb at apply irq. - kept name msi_virqbase because it is msi irq base number, not base address. - Change from v6 to v7 pcie: endpoint: add endpoint MSI support Fine tuning commit message Fixed issues, reviewed by Bjorn Helgaas - Change from v5 to v6 Fixed build error found by kernel test robot - Change from v4 to v5 Fixed dt-binding document add msi-cell add interrupt max number update naming reg-names and power-domain-names. Fixed irqchip-Add-IMX-MU-MSI-controller-driver.patch rework commit message remove some field in struct imx_mu_dcfg error handle when link power domain failure. add irq_domain_update_bus_token - Change from v3 to v4 Fixed dt-binding document according to Krzysztof Kozlowski's feedback Fixed irqchip-imx-mu-worked-as-msi-controller according to Marc Zyngier's comments. There are still two important points, which I am not sure. 1. clean irq_set_affinity after platform_msi_create_irq_domain. Some function, like platform_msi_write_msg() is static. so I have to set MSI_FLAG_USE_DEF_CHIP_OPS flags, which will set irq_set_affinity to default one. 2. about comments > + msi_data->msi_domain = platform_msi_create_irq_domain( > + of_node_to_fwnode(msi_data->pdev->dev.of_node), > + &imx_mu_msi_domain_info, > + msi_data->parent); "And you don't get an error due to the fact that you use the same fwnode for both domains without overriding the domain bus token?" I did not understand yet. Fixed static check warning, reported by Dan Carpenter pcie: endpoint: pci-epf-vntb: add endpoint MSI support - Change from v2 to v3 Fixed dt-binding docment check failure Fixed typo a cover letter. Change according Bjorn's comments at patch pcie: endpoint: pci-epf-vntb: add endpoint MSI support - from V1 to V2 Fixed fsl,mu-msi.yaml's problem Fixed irq-imx-mu-msi.c problem according Marc Zyngier's feeback Added a new patch to allow pass down .pm by IRQCHIP_PLATFORM_DRIVER_END